UPLIFT DESK TOP425 Craft Table User Manual

UPLIFT DESK TOP425 Craft Table User Manual

These instructions show the Craft Table being attached to an UPLIFT Desk 2-Leg Standing Desk, C-Frame.

The Craft Table can also be used with these UPLIFT Desk frames:

Craft Table

• 2-Leg Standing Desk, T-Frame

• 2-Leg Seated Height Table, C-Frame

• 4-Leg Seated Height Table

• 2-Leg Seated Height Table, T-Frame

• 4-Leg Standing Height Table

Assembly Instructions

Step 1

1. Open your box and dispense of its packaging.
2. Take a moment to put some masking tape on the drawers and lids so they stay closed while moving, flipping over, and assembling your desk.
   

Note: If you do not use tape, loose drawers and lids may open suddenly, possibly damaging the table or causing injury.

NOTE
Masking tape or Painter’s tape should be strong enough to keep drawers and lids closed while also being gentle enough to not damage your Craft Table’s surface. Do NOT use other types of tape such as Scotch or Duct tape.

Step 2

1. To avoid any damage to your floor or your Craft Table, assemble on top of a debris free carpeted area or blanket.
2. Have a friend help you place the Table upside down on the blanket or carpet, so that the predrilled holes and threaded inserts are facing up.
   

Step 3

1. Get ready to attach the desk frame to the Table.
   Refer to the instructions provided with your frame for assembly.

2. Line up the holes in your frame with the threaded inserts in the table per the frame instructions.

3. Attach the frame to the Table using the #10- 24×3/4’’ Machine Screws and Washers that were provided with the frame.

Step 4

1. Once the Table is secured to the frame, have your friend help you flip it over safely.
   • Grasp both the frame and Craft Table being careful to support both equally so you do not stress the screws or pull them loose and flip the Table over.
2. Adjust the leveling studs on the feet to ensure that it is level.
3. Once it is right-side up, carefully remove the tape from the lids and drawers.

CAUTIONS & WARNINGS

CAUTION: Read all instructions before assembly. Failure to assemble properly may result in damage or personal injury.

WARNING: Exercise caution with the table’s hinged lids as they can slam shut and cause injury.

Copyright Notice: These instructions are a component of this product. These instructions are part of the scope of delivery, even if the item is resold. These instructions are also available on the UPLIFT Desk website: uplift- desk.com. Excerpts or copies may not be forwarded to third parties or used in any other published form without the prior written consent of UPLIFT Desk. These instructions are subject to United States copyright law.

Support

UPLIFT Desk
800-349-3839
Email: [email protected]
Web: upliftdesk.com

References

• UPLIFT Desk | Office Furniture that Benefits You

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>