LANDMANN 28925 Fireplace Owner’s Manual

: July 5, 2024
: LANDMANN

Table of Contents

LANDMANN 28925 Fireplace
Product Usage Instructions
PARTS LIST
FIRE PIT ASSEMBLY INSTRUCTIONS
COVER
HELPFUL HINTS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LANDMANN 28925 Fireplace

Specifications :

Model: Landmann 28925
Assembly Time : 45 minutes

Product Usage Instructions

Parts List:

When unpacking the fire pit, ensure you have all the necessary parts:

```
* (6) Bottom Screen Sections
```
- (1) Connecting Ring
- (1) Center Ring

Assembly Instructions:

Step 1: Assemble the Bottom

Attach the legs to the bottom screen sections using hex nuts and flat washers. Ensure even spacing and tighten securely.

Step 2: Assemble the Legs

Securely attach the legs to the bottom screen sections with the provided hardware.

Step 3: Assemble the Center Ring

Place the center ring on the bottom screen sections and align with the top holes. Securely fasten using the provided bolts and hex nuts.

FAQ:

Q: What tools are needed for assembly?
- A: You will need a Phillips or plain screwdriver and an adjustable wrench for assembly.
Q: How do I get assistance with assembly?
- A: If you have any questions or trouble with assembly, please call 1-800-321-3473 for assistance.

Assembly and Use Instructions for Model:
28923
28924
28925

PLEASE READ ALL RULES FOR SAFE OPERATION AND HELPFUL HINTS BEFORE USING.

$LANDMANN-28925-Fireplace-fig $2$$

READ FIRST! RULES FOR THE BALL O FIRE SAFE OPERATION.

THIS OUTDOOR FIRE PIT IS FOR OUTDOOR USE ONLY!

USE ONLY ON BRICK, CONCRETE, STONE OR OTHER MASONRY SURFACES!
DO NOT USE ON LAWNS, WOODEN DECKS, ARTIFICIAL WOOD OR ASPHALT!
KEEP THE OUTDOOR FIRE PIT A MINIMUM OF 10 FT. AWAY FROM BUILDINGS, STRUCTURES, ANY FLAMMABLE ITEMS AND VEHICLES.
NEVER USE UNDER LOW-HANGING TREE BRANCHES, TRELLIS, OVERHANGS OF ANY KIND INCLUDING COVERED PORCHES.
WARNING! NEVER USE GASOLINE, ALCOHOL OR VOLATILE FLUIDS TO START OR RESTART FIRES.
DO NOT USE WITHOUT A FIREBOWL, THE FIREBOWL MUST BE USED AT ALL TIMES!
THIS FIRE PIT MUST BE USED ON A LEVEL SURFACE.
FIREWOOD MUST BE KEPT WITHIN THE BOUNDARIES OF THE FIREBOWL.
FIREWOOD MUST NOT BE ALLOWED TO TOUCH ANY PART OF THE SCREEN.
FOR LONGER PRODUCT LIFE, KEEP FIRES TO A RESPECTABLE SIZE, DO NOT OVERLOAD.
THE OUTDOOR FIRE PIT IS FOR ADULT USE ONLY.
DO NOT LEAVE UNATTENDED AT ANY TIME WHILE IN USE.
DO NOT MOVE THE FIRE PIT DURING USE.
DO NOT USE IN WINDY CONDITIONS!
DO NOT USE FOR BURNING LEAVES OR GARBAGE.
USE CAUTION WHEN TENDING THE FIRE, AS SURFACES WILL BECOME VERY HOT WHILE IN USE.
USE MITTENS OR GLOVES TO OPEN THE SPARK GUARD DOOR, THE HANDLE AND SPARK GUARD WILL BECOME VERY HOT!!
USE CAUTION AROUND THE FIRE PIT, AS HOT STEAM OR A FLARE-UP COULD CAUSE BURNS.
DO NOT ATTEMPT TO EMPTY OR REMOVE THE FIREBOWL FROM THE FIRE PIT DURING USE.
BEFORE EACH USE MAKE SURE THE OUTDOOR FIRE PIT IS IN GOOD WORKING CONDITION.
USE CAUTION AFTER THE FIRE HAS BEEN EXTINGUISHED, SURFACES WILL REMAIN HOT FOR SOME TIME.
THE OUTDOOR FIRE PIT MUST BE COMPLETELY COOLED OFF ANDALL EMBERS MUST BE EXTINGUISHED BEFORE ANY COVER CAN BE USED.

PARTS LIST

When unpacking the fire pit from the carton, make sure you find and become familiar with all the parts listed below. Use caution as some parts may have sharp edges.

$LANDMANN-28925-Fireplace-fig $3$$

$LANDMANN-28925-Fireplace-fig $4$$

FIRE PIT ASSEMBLY INSTRUCTIONS

Assembly time: 45 minutes

A Phillips or plain screwdriver and an adjustable wrench are needed for assembly.

STEP 1: ASSEMBLE THE BOTTOM

$LANDMANN-28925-Fireplace-fig $5$$

Find (6) bottom screen sections [ B ] and assemble together using (12) 13MM bolts [ U ], (6) 25MM bolts [ R ] and (18) hex nuts [ W ]. Assemble the 25MM bolt in the center as shown. Only finger tightened at this time.

STEP 2: ASSEMBLE THE LEGS

Assemble the (3) legs [ Q ] to the bottom screen sections using (6) hex nuts [ W ] and (6) flat washers [ Z ]. Note to evenly space the legs. Securely tighten the bolts.

STEP 3: ASSEMBLE THE CENTER RING

Place the center ring [ C ] on the bottom screen sections and align with the top holes. Assemble using (6) 20MM bolts [ S ] and (6) hex nuts [ W ]. Securely tighten the bolts after all bolts have been started, including the (18) bolts on the bottom screen sections.

DO NOT RETURN PRODUCT TO THE STORE. IF YOU HAVE QUESTIONS OR HAVE TROUBLE WITH ASSEMBLY, PLEASE CALL
1-800-321-3473 FOR ASSISTANCE.

FIRE PIT ASSEMBLY INSTRUCTIONS

$LANDMANN-28925-Fireplace-fig $6$$

STEP 4: ASSEMBLE THE TOP SCREEN SECTIONS

Find the top screen sections [ E,F,G ] and assemble together using (6) 10MM bolts [ T ] and (6) cap nuts [ X ]. Assemble with the cap nuts on the OUTSIDE. Finger tighten only.

STEP 5: ASSEMBLE THE CONNECTING RING

Assemble the connecting ring [ L ] to the top screen sections using (4) 13MM bolts [ U ] and (4) hex nuts [ W ]. Tighten all bolts in STEPS 4 and 5 securely.

STEP 6: ASSEMBLE THE DOOR SCREEN SECTIONS

Find the door screen sections [ H,J,K ] and assemble together using (6) 13MM bolts [ U ] and (6) hexnuts [ W ]. Finger tighten only.

STEP 7: ASSEMBLE THE CONNECTING RING WITH HANDLE

Assemble the connecting ring with handle [ M ] to the door screen sections using (4) 13MM bolts [ U ] and (4) hex nuts [ W ]. Tighten all bolts in STEPS 6 and 7 securely.

FIRE PIT ASSEMBLY INSTRUCTIONS

STEP 8: ASSEMBLE THE TOP SCREEN SECTIONS TO CENTER RING

Assemble the top screen section assembly [ E,F,G ] to the center ring [ C ] using (2) 13MM bolts [ U ] and (2) hex nuts [ W ]. Tighten securely.

STEP 9: ASSEMBLE THE HANDLES OF THE FIRE BOWL

Assemble the (2) handles [ N ] to the fire bowl [ O ] using (4) hex nuts [ W ]. Tighten securely but do not overtighten or the porcelain will be cracked.

STEP 10: PLACE THE FIREBOWL

Place the fire bowl [ O ] inside and on the bottom of the fire pit.

STEP 11: ASSEMBLE THE DOOR SCREEN SECTION ASSEMBLY

Assemble the door screen assembly [ H, J,K ] to the pivot pins as shown. Squeeze the ends of the door together if necessary and insert into the pins. Assemble using (2) 40MM bolts [ V ], (2) flat washers [ Z ], (2) lock washers [ Y ] and (2) hexnuts [ W ]. Tighten securely.

$LANDMANN-28925-Fireplace-fig $7$$

COVER

Add cover [ P ] to fire pit. Keep the fire pit out of the weather and elements. Use cover only after the fire pit is completely cool to the touch.

HELPFUL HINTS

ADDING 5 LBS OF SAND TO THE BOTTOM OF THE FIREBOWL WILL EXTEND THE FIREBOWL LIFE.

KEEP THE FIRE PIT OUT OF THE WEATHER AND ELEMENTS.
STORE THE FIRE PIT IN A DRY LOCATION OUT OF THE WEATHER.
DO NOT LET THE FIREBOWL FILL WITH WATER.
DO NOT DUMP ASHES WHERE A FIRE CAN BE STARTED.
DISPOSE OF ASHES IN PROPER RECEPTACLE ONLY AFTER ASHES HAVE COOLED.
USE ANY COVER ONLY AFTER THE FIRE PIT IS COMPLETELY COOL TO THE TOUCH.

Congratulations on your purchase of the Ball O Fire Fire Pit! At Landmann USA, we strive to provide you with an easy-to-use, easy-to-assemble product. However, in the unlikely event your package should have a missing or defective part, please contact us at: customerservice@landmann- usa.com

-OR- 1-800-321-3473 M-F 8-5 ET.
Proof of purchase may be required. Thank you!

$LANDMANN-28925-Fireplace-fig $8$,.,..,.,.$