Cox Homelife Smart LED Light Bulb User Manual
- July 21, 2024
- Cox
Table of Contents
Cox Homelife Smart LED Light Bulb User Manual
With the Smart LED Light Bulb from Homelife, you can easily switch out old bulbs, for new efficient, dimmable LED bulbs that have a life expectancy of up to 22 years! Plus, you can control your lights remotely using the Cox Homelife mobile app or online Subscriber Portal and set up Rules that automate when they turn on or off. Follow these steps to install and pair your new Smart Bulb with the Homelife system. Expected Installation Time: 5 minutes
Watch Installation Video
Before you begin, watch the Smart LED Light Bulb installation video at
cox.com/diyhomelife on your mobile device,
tablet or computer.
START HERE
cox.com/diyhomelife
Install Smart Bulb
You may install your Smart Bulb in any indoor light fixture, such as a lamp or ceiling light, with an E26 standard (medium) base socket.
- Start with the light turned off
- Replace the old light bulb with the new Smart Bulb
- Turn on the light
- The light bulb will begin to pulse, indicating it is ready to pair with your Homelife system.
- You will have 3 minutes to complete the pairing process.
INSTALLATION TIP
Pair the bulb using a lamp located near your Touchscreen. You can move the
bulb to any location after pairing is complete.
TROUBLESHOOTING TIP
If the bulb does not pulse immediately, or if it has timed out, you can reset it by quickly turning the bulb off and on 10 times. The bulb will blink five times, indicating it is ready to pair.
Pair Smart Bulb with Touchscreen
-
On your Touchscreen Control Panel, press the Settings app.
-
Enter your 4-digit master keypad code.
-
From the Settings menu, select Home Devices > Lighting > Add Lights.
-
The Locating Lighting Devices screen will appear. Press Next to begin the pairing process. Once the Smart Bulb is found by the Touchscreen, the light will become solid.
(Note : Do not press Done during the pairing process.) -
When the “Dimmable Light” icon appears, the pairing is complete. Press Done. Then press Next to configure your Smart Bulb
Configure Smart Bulb
- On the Configure Lighting Devices screen, press the “Dimmable Light” icon to configure it.
- Tap the ‘Dimmable Light Name’ field to display a keyboard. Delete the default name and enter the desired name for your Smart Bulb or light fixture (for example: Living Room Lamp).
- Press Done to close the keyboard.
- Toggle the ‘Dimmable’ field to Yes to allow the bulb’s brightness to be controlled by the Homelife system.
- Press Next to complete the configuration. Press the Touchscreen’s home button to return to the home screen.
Congratulations, the installation and pairing process is now complete!
You can now control your Smart LED Light Bulb using the Lights app on your
Touchscreen, Homelife mobile app or online Subscriber Portal.
IMPORTANT
The light switch for your light fixture must remain in the ON position to
control the bulb remotely. Please note, that the LED bulb is rated for indoor
use only. Outdoor use will void the product warranty. To learn how to set up
Rules and find other helpful information, visit us online at
cox.com/diyhomelife For Homelife technical
support, call 1-877-404-2568.
Download PDF:Cox Homelife Smart LED Light Bulb User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>