PHILIPS MasterClass InstantFit UL Type- A T8 Owner’s Manual
- July 4, 2024
- Philips
Table of Contents
PHILIPS MasterClass InstantFit UL Type- A T8
Product Specifications
- Brand: MasterClass
- Product Name: InstantFit T8
- Model: 7T8/MAS/24-840/IF11/P/DIM 10/1
- Cap-Base: G13 [Medium Bi-Pin Fluorescent]
- Nominal Lifetime: 70,000 hours
- Switching Cycle: 50,000
- Lighting Technology: LED
- Color Temperature: 4000 K
- Luminous Flux: 1,200 lm
- Luminous Efficacy (rated): 171 lm/W
- Color Designation: Cool White (CW)
- Beam Angle: 180 degrees
Product Usage Instructions
- Make sure the power source is switched off before installing or replacing the T8 bulb.
- Insert the T8 bulb into the socket and twist it gently to secure it in place.
- Turn on the power and test the light to ensure proper functionality.
- If the bulb is dimmable, adjust the dimmer switch to your desired brightness level.
- For optimal performance, keep the bulb clean and free from dust accumulation.
FAQ
- Q: Can I use this T8 bulb in a fixture that requires a different base?
- A: No, it is important to match the cap-base type to the fixture’s requirements for safe and proper operation.
- Q: Is this T8 bulb suitable for outdoor use?
- A : It is recommended to check the product specifications for outdoor suitability. Using it outdoors may affect its performance and lifespan.
- Q: How do I dispose of this T8 bulb properly?
- A : Please refer to local regulations for the correct disposal method of this LED bulb to minimize environmental impact.
7T8/MAS/24-840/IF11/P/DIM 10/1
The MasterClass InstantFit T8 lamps provide hassle-free installation with simple lamp-for-lamp replacements. They deliver what we promise, with at least 40% energy savings, flicker-free performance, and the life you would expect. Other lamps claim compatibility but only MasterClass InstantFit (UL Type A) has been proven to work with over 200 ballasts and drivers, delivering even light output, with proven energy savings and a long average lifetime. End users will be delighted being under these comfortable and high-quality lamps with no visible flicker and optimized optics. Energy managers will enjoy these lamps too as they can count the savings delivered by our lamps. To enjoy more energy savings, the MasterClass InstantFit lamps can be paired with the Advance TLED drivers to create a Type C system. With available 70,000-hour life, 7-year limited warranty and a shatter-prevention polycarbonate lens, Philips MasterClass InstantFit TLED lamps deliver benefits for all.
Product data
General Information
Cap-Base : G13 [Medium Bi-Pin Fluorescent] Nominal lifetime : 70,000
hours (s)
Switching Cycle : 50,000
Lighting Technology: LED
Light Technical
Color Code : 840 [CCT of 4000K] Beam Angle (Nom): 180 degrees (s)
Luminous Flux : 1,200 lm
Luminous Efficacy (rated) (Nom): 171 lm/W
Color Designation: Cool White (CW)
Correlated Color Temperature (Nom) :4000 K
Color Consistency: <6
Color rendering index (CRI): 80
LLMF At End Of Nominal Lifetime (Nom): 70 %
MasterClass InstantFit (UL Type-A) T8
Operating and Electrical| | | Approval and Application|
---|---|---|---|---
Line Frequency| 20K to 120K Hz| | Energy Saving Product| Yes
Input Frequency| 20K to 120K Hz| | Approval Marks| RoHS
compliance UL certificate DLC
Power Consumption| 7 W| | | compliance
Lamp Current (Max)| 240 mA| | Energy Consumption kWh/1000 h| – kWh
Lamp Current (Min)| 50 mA| | Energy Certifications| DLC
Standard
Wattage Equivalent| 17 W| | EU RoHS compliant| Yes
Starting Time (Nom)| 0.5 s| | |
Warm-up time to 60% light| 0.5 s| | Application Conditions|
Power Factor (Fraction)| 0.9| | can it be used in closed
luminaires| Yes
Voltage (Nom)| 120-277,347 V| | |
UL Type| UL Type A| | Product Data|
| | | Order product name| 7T8/MAS/24-840/IF11/P/DIM 10/1
Temperature| | | Full product name| 7T8/MAS/24-840/IF11/P/DIM 10/1
Ambient temperature range| -20 °C to 45 °C| | Order code|
541839
T-Case Maximum (Nom)| 40 °C| | Material Nr. (12NC)|
929001987104
| | | Numerator – Quantity Per Pack| 1
Controls and Dimming| | | Net Weight (Piece)| 0.090
kg
Dimmable| Only with specific dimmers| | EAN/UPC – Product/Case|
046677541835
| | | Numerator – Packs per outer box| 10
Mechanical and Housing| | | EAN/UPC – Case| 50046677541830
Bulb Finish| Frosted| | |
Bulb Material| Plastic| | |
Product Length| 600 mm| | |
Bulb Shape| T8| | |
Approval and Application|
---|---
Energy Saving Product| Yes
Approval Marks| RoHS compliance UL certificate DLC
| compliance
Energy Consumption kWh/1000 h| – kWh
Energy Certifications| DLC Standard
EU RoHS compliant| Yes
|
Application Conditions|
can it be used in closed luminaires| Yes
|
Product Data|
Order product name| 7T8/MAS/24-840/IF11/P/DIM 10/1
Full product name| 7T8/MAS/24-840/IF11/P/DIM 10/1
Order code| 541839
Material Nr. (12NC)| 929001987104
Numerator – Quantity Per Pack| 1
Net Weight (Piece)| 0.090 kg
EAN/UPC – Product/Case| 046677541835
Numerator – Packs per outer box| 10
EAN/UPC – Case| 50046677541830
|
Dimensional drawing
MasterClass InstantFit (UL Type-A) T8
Photometric data
General uniform lighting – 7T8/MAS/24-840/IF11/P/DIM 10/1 
Spectral Power Distribution Colour – 7T8/MAS/24-840/IF11/P/DIM 10/1
Light Distribution Diagram – 7T8/MAS/24-840/IF11/P/DIM 10/1 
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial oƒer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V
2024, February 16 – data subject to change