Abbott NAVICA CONNECT App User Guide
- June 4, 2024
- Abbott
Table of Contents
Abbott NAVICA CONNECT App
HOW TO CREATE A TESTING SITE
- After logging in to the NAVICA™ Connect Portal, select Testing Sites in the navigation panel. Then, select the Create Testing Site button.
- In the Create Testing Site window, enter information into the fields provided.
Testing site public display name, public or private, status and address are required.
- After the information has been entered, select the Next button.
- In the State Reporting Details section, select the Next button.*
*Important: Do not complete this section until team members have been assigned to the testing site. Therefore, please skip this State Reporting Details section for now.
- In the Team Members section, select the team member(s) who should be assigned to this testing site from those listed. Then, select the Save button.*
*Important: If there are team members who should be assigned to this testing site and they aren’t present in the list for selection, first select the Save button to save the Testing Site Details for now. Then, create the new team members and return to the testing site afterwards to assign the newly created team members to the testing site. Remember to Save after doing so. For instructions on How to Create Team Members, please refer to the NAVICA Connect Managing Team Members Quick Reference Guide.
The Testing Site should now be listed, show an Active status, and show a State Reporting Status of Not Applicable.
HOW TO CREATE STATE REPORTING DETAILS
- After logging in to the NAVICA™ Connect Portal, select Testing Sites in the navigation panel. Then, select a testing site from the list.
If a testing site is not listed, follow the steps for creating a testing site first. Then, select the testing site and proceed to step 2, as follows.
- In the Edit Testing Site window, select the Team Members tab.
- In the Team Members section, select the team member(s) who should be added to the testing site. Then, select the State Reporting Details tab.
- In the State Reporting Details section, enter information in the fields provided. Then, select the Save button.
All fields are required.
Important: Verify that all information is correct before selecting the Save button. Once saved, the state reporting information will be routed for setup.
The State Reporting Status will now be set to ‘Pending’ indicating that reporting setup is under review. This review process may take up to 3 days.
Upon approval, the State Reporting Status will be set to Approved indicating that state reporting is now enabled for the site.
Note: State reporting will not begin until the status is indicated as ‘Approved’ in the NAVICA™ Connect Portal.
ABOUT COMPANY
© 2021 Abbott. All rights reserved. All trademarks referenced are trademarks of either the Abbott group of companies or their respective owners. Any photos displayed are for illustrative purposes only. COL-04468-03 10/21
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>