MuxLab 500514 HDMI 2.1 48Gbps Audio De Embedder User Manual
- June 1, 2024
- MuxLab
Table of Contents
MuxLab 500514 HDMI 2.1 48Gbps Audio De Embedder
Safety Precautions
To ensure the best performance from the product, please read all instructions carefully before using the device. Save this manual for future reference.
- Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury.
- Do not dismantle the housing or modify the module. It may result in electrical shock or burns.
- Do not open or remove the housing of the device as you may be exposed to dangerous voltage or other hazards.
- To prevent fire or shock hazard, do not expose the unit to rain, moisture and do not install this product near water. Keep the product away from liquids.
- Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on the housing, unplug the module immediately.
- Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
- Using supplies or parts not meeting the product specifications may cause damage, deterioration or malfunction.
- Refer all servicing to qualified service personnel.
- Install the device in a place with adequate ventilation to avoid damage caused by overheat.
- Unplug the power when left unused for a long period of time.
- Information on disposal of devices: do not burn or mix with general household waste, please treat them as normal electrical waste.
Copyright Notice
All contents in this manual are copyrighted, and cannot be cloned, copied, or
translated without the express permission of MuxLab Inc. Product
specifications and information in this document are for reference only, and
the content may be updated from time to time without prior notice.
Introduction
The HDMI 2.1 48Gbps Audio De-Embedder (model: 500514) can extract audio
signals from an HDMI source or ARC-compatible TV and send them to an analog
stereo audio output and an S/PDIF digital audio output. It supports data rates
up to 48Gbps to comply with HDMI 2.1 and HDCP 2.3 requirements. In addition,
the unit allows the HDMI source to be looped out and extended to a local
display; it also includes several features to facilitate integration such as
EDID management and cable equalization providing an easy solution for HDMI
installations to send audio signals to a stereo audio or surround sound
system.
Features
- HDMI 2.1 and HDCP 2.3 compliant
- Supports 48Gbps FRL and 18Gbps TMDS video bandwidth
- Supports video resolution up to 8K/60Hz 4:2:0 12bit, 4K/120Hz 4:4:4 12bit
- HDMI 2.1 protocols: VRR, ALLM, QMS, QFT, SBTM are supported
- Support HDR, HDR 10, HDR 10+, Dolby Vision, HLG pass-through
- LPCM 7.1CH, Dolby True HD, Atmos and DTS-HD Master, DTS:X Audio pass-through
- HDMI input audio or TV ARC audio de-embedded to S/PDIF and L/R audio output
- Support CEC control from output devices to input sources
- Advanced EDID management
- Compact design for easy and flexible installation
Package Contents
- One (1) 48Gbps HDMI Audio De-embedder
- One (1) 5VDC/1A Multinational Power Supply
- One (1) User manual (available via download)
Notes Confirm that the product and accessories are all included. If not, please contact the supplier from which you purchased the unit.
Specifications
Technical
HDMI Compliance
| ****
HDMI 2.1
---|---
HDCP Compliance| HDCP 2.3
Video Bandwidth| 48Gbps FRL and 18Gbps TMDS
Video Resolution| Up to 8K/60Hz 4:2:0 12bit, 4K/120Hz 4:4:4 12bit
Color Depht| 8/10/12 – bit
Color Space| RGB, YCbCr_4:4:4, YCbCr_4:2:2, YCbCr_4:2:0
Audio Formats
| HDMI IN/OUT:
LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD AUDIO BREAKOUT:
OPTICAL OUT: PCM 2.0CH, Dolby, DTS 5.1CH L/R OUT: PCM 2.0CH
HDR| HDR, HDR 10,HDR 10+, Dolby Vision, HLG
ESD Protection| Human body model — ±8kV (Air-gap discharge) &
±4kV (Contact discharge)
Connection|
Input| 1 × Souirce IN [HDMI Type A, 19-pin female]
Output
| 1 × TV(ARC) OUT [HDMI Type A, 19-pin female] 1 × L/R [3.5mm Stereo mini- jack]
1 × OPTICAL [S/PDIF, female]
Control| 1 × SERVICE [USB Type C, Update port]
Mechanical|
Housing| Metal Enclosure
Color| Black
Dimensions| 95mm [W] × 68mm [D] × 18mm [H]
Weight| 178g
Power Supply| Input: 100-240VAC 50/60Hz, Output: 5VDC/1A
Power Consumption| 4W (Max)
Operation Temperature| 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (non-condensing)
Generic Specification|
Warranty| 2 years
Order Information| 500514 HDMI 2.1 48Gbps 1×4 Splitter (UPC: 627699005149)
Operation Controls and Functions1
Front Panel
| No | Name | Function Description |
|---|---|---|
| 1 | IN port | HDMI signal input port, connected to HDMI source device such as |
DVD or PS5
with an HDMI cable.
2| OUT port| HDMI signal output port, connected to HDMI display device such as
TV or Monitor with an HDMI cable. It can be used as the ARC audio channel when
the ARC function is enabled.
3| OPTICAL| Optical audio output port.
4| L/R| Analog audio output port.
5| DC 5V| 5VDC / 1A power input port.
Application Example
2321 Cohen | St-Laurent , H4R 2N7 | Québec, Canada Tel: 514-905-0588 | Fax:514-905-0589 | Toll free: 1-877-689-5228 [email protected] |[email protected] | www.muxlab.comHDMI