MUXLAB 100504-V2 HDMI 2.0 Extender Kit User Manual

: June 1, 2024
: MuxLab

Table of Contents

MUXLAB 100504-V2 HDMI 2.0 Extender Kit
Product Information
Product Usage Instructions
Safety Precautions
Introduction
Features
Package Contents
Specifications
Operation Controls and Functions
Application Example
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MUXLAB 100504-V2 HDMI 2.0 Extender Kit

Product Information

Specifications:

HDMI Compliance: HDMI 2.0
HDCP Compliance: Yes
Video Bandwidth: –
Video Resolution: –
Color Space: –
Color Depth: –
HDMI Audio Formats: –
ESD Protection: Yes
Connection:
- Transmitter:
- Inputs: 1 x HDMI Type A, 1 x SERVICE [Micro USB]
- Outputs: 1 x HDMI Type A, 1 x IR OUT, 1 x CAT OUT [RJ45]
- Receiver:
- Inputs: 1 x IR IN, 1 x CAT IN, 1 x SERVICE [Micro USB]
- Outputs: 1 x HDMI Type A
Mechanical:
- Housing Color: –
- Dimensions: –
- Weight: –
- Power Supply: 12VDC/1A
- Power Consumption: –
- Operating Temperature: –
- Storage Temperature: –
- Relative Humidity: –
Generic Specification:
- Warranty: 2 years
- Order Information: 100504-V2 HDMI 2.0 Extender Kit, 50M (UPC: 627699515044)

Product Usage Instructions

Safety Precautions:
To ensure the best performance, read all instructions carefully before using the device. Save the manual for future reference.

Introduction:
The HDMI 2.0 Extender Kit allows you to extend HDMI signals up to 50 meters.

Features:

Supports HDCP compliance
Includes transmitter, receiver, IR Blaster cable, IR Receiver cable, power adapter, mounting ears
Supports HDMI audio formats
ESD Protection

Package Contents:

HDMI 2.0 Extender (Transmitter)
HDMI 2.0 Extender (Receiver)
IR Blaster cable (1.5 meters)
IR Receiver cable (1.5 meters)
Power adapter
Mounting Ears
User manual (available via download)

Operation Controls and Functions:

Transmitter Panel:

HDMI OUT: Connect to HDMI display device
HDMI IN: Connect to HDMI source device
CAT OUT: Connect to CAT IN port on the receiver

Receiver Panel:

HDMI OUT: Connect to HDMI display device

Frequently Asked Questions (FAQ):

Q: Can I use this extender kit with all HDMI devices?
A: The extender kit is compatible with most HDMI devices, but please check for HDMI Compliance and other specifications for optimal performance.

Safety Precautions

To ensure the best performance from the product, please read all instructions carefully before using the device. Save this manual for future reference.

Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury.
Do not dismantle the housing or modify the module. It may result in electrical shock or burns.
Do not open or remove the housing of the device as you may be exposed to dangerous voltage or other hazards.
To prevent fire or shock hazard, do not expose the unit to rain, moisture and do not install this product near water. Keep the product away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on the housing, unplug the module immediately.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
Using supplies or parts not meeting the product specifications may cause damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
Install the device in a place with adequate ventilation to avoid damage caused by overheat.
Unplug the power when left unused for a long period of time.
Information on disposal of devices: do not burn or mix with general household waste, please treat them as normal electrical waste.

Introduction

The HDMI 2.0 Extender Kit, 50m (Model: 500408) allows extend a high-definition video/audio signals and one-way IR commands up to 164ft/50m between the transmitter and receiver over a single Cat5e/6 cable. This extender supports up to 4K/60Hz 4:4:4 video resolution, 18Gbps bandwidth, HDCP 2.2., HDMI Loop- out on the Transmitter, and one-way IR pass-through enabling source control.
The extender includes one Transmitter unit and Receiver unit. The Transmitter unit is responsible for capturing HDMI input signal and carries the signal via one Cat5e/6 cable, and emitting IR control signals. The Receiver unit is responsible for receiving the HDMI signal and capturing IR control signals.

Features

HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
Supports 18Gbps bandwidth
Supports input and output video resolution up to 4K/60Hz 4:4:4, extends distance up to 164ft /50m
Supports one HDMI loop output
Supports one-way IR pass-through
Supports HDR function
Supports PoC (Power over Cable) function, it means that either transmitter or receiver is powered supply by 12VDC/1A power adapter, the other doesn’t need power supply Supports automatic copy EDID function
Compact design for easy and flexible installation

Package Contents

One (1) HDMI 2.0 Extender (Transmitter)
One (1) HDMI 2.0 Extender (Receiver)
One (1) IR Blaster cable (1.5 meters)
One (1) 20~60KHz IR Receiver cable(1.5 meters) One (1) 12VDC/1A Locking Power adapter Four (4) Mounting Ears
One (1) User manual (available via download)

Notes：Confirm that the product and accessories are all included. If not, please contact the supplier from which you purchased the unit.