MettaX MC401L 4G Built In Quad Channel AI Dash Cam User Manual
- July 2, 2024
- MettaX
Table of Contents
MC401L 4G Built In Quad Channel AI Dash Cam
“`html
Product Information
Specifications
-
Product Name: MC401L Smart Dash Cam
-
Manufacturer: MettaX Digital (Shenzhen) Co., Ltd.
-
Features: Single recording camera, suitable for various weather
conditions -
Installation: Suitable for buses, taxis, passenger cars,
trucks, hazardous goods transport vehicles, school buses, dump
trucks, and sanitation vehicles
Product Usage Instructions
1. System Overview
The MC401L is a smart dash cam with a built-in single recording
camera designed to assist drivers in various weather conditions. It
is suitable for installation in a wide range of vehicles.
2. Installation Preparation
2.1 Installation Technical Requirements
Personnel installing the product should be familiar with its
features, applications, and vehicle circuits. They should also
understand common installation methods for in-vehicle devices.
2.2 Understanding the Installation Environment
Prior to installation, personnel should be aware of the vehicle
model, installation position, cable requirements for different
models, and commonly used auxiliary materials.
2.3 Vehicle Condition and Related Electrical Information
Confirmation of vehicle information is crucial for successful
installation. Each installation step should be confirmed by the
responsible person and installation personnel.
FAQ
Q: What vehicles are suitable for installing the MC401L dash
cam?
A: The MC401L can be installed in buses, taxis, passenger cars,
trucks, hazardous goods transport vehicles, school buses, dump
trucks, and sanitation vehicles.
Q: What are the key technical requirements for
installation?
A: Personnel should have knowledge of the product features,
vehicle circuits, structures, and common installation methods for
in-vehicle devices.
“`
Installation user manual
MC401L
MettaX Digital (Shenzhen) Co., Ltd.
Content
Introduction ………………………………………………………………………………………………………………… 2 1.System Overview
………………………………………………………………………………………………………4
1.1Product Overview …………………………………………………………………………………….. 4 1.2. Schematic
diagram powered by standard power cable: ……………………………….. 4 2. Installation
Preparation …………………………………………………………………………………………….. 5 2.1 Installation Technical
Requirements ……………………………………………………………5 2.2 Understanding the Installation
Environment ………………………………………………… 5 2.3 Vehicle Condition and Related Electrical
Information ……………………………………. 5 2.4 Vehicle Power Connection
…………………………………………………………………………5 3. Preparation for Installation Materials and
Tools …………………………………………………………….7 3.1 Package Inventory Check
………………………………………………………………………….7 3.2 Installation Materials and Tools
…………………………………………………………………. 7 3.3 Preparing standard SIM Card and Micro SD
Memory Card …………………………….9 4. Installation
……………………………………………………………………………………………………………..10 4.1 Installing standard SIM Card
and Memory Card ………………………………………….10 4.2 Choice of Installation Area for the
Main Unit ……………………………………………… 11 4.3 Installation of the main unit.
…………………………………………………………………….. 13 4.4 Adjustment and Fixation of the device
……………………………………………………….13 4.5 Power Connection, Signal Cable, and Cable
Connection ……………………………..14 5.Device configuration
……………………………………………………………………………………………….. 15 6. Acceptance and Cleaning
………………………………………………………………………………………..15 6.1 Cleaning
………………………………………………………………………………………………. 15 6.2 Installation Acceptance
……………………………………………………………………………15
1 / 16
MettaX Digital (Shenzhen) Co., Ltd.
Introduction
To guide engineers in the correct and efficient installation of MC401L and its
accessories, and to improve installation efficiency, this MC401L Solution
Installation Guide has been prepared.
This document primarily includes: Preamble, System Overview, Installation
Preparation, Installation Introduction, Acceptance, and Cleaning. This
document is intended for installation engineers.
We reserve the right to interpret this document and modify the information and
descriptions contained herein. In the event of any changes to the content of
this manual, no separate notification will be provided.
Important Notice
1. Prior to installation, park the vehicle on level ground and turn off the
engine (do not park the vehicle on slopes or inclined roads). 2. Please
carefully read the section on packing list and thoroughly inspect upon
unpacking. 3. Please carefully read the section on tool list and ensure the
availability of installation tools prior to proceed the installation. 4. Prior
to installation, observe the vehicle’s surroundings and adhere to the
following principles:
a. The installation position and wiring of the product should not obstruct the
driver’s visibility or adjustment of the rear-view mirror and sun visor. b.
The lens for monitoring the road conditions ahead of the vehicle must be
within the working range of the windscreen wipers. c. The installation
position of the in-cabin driver monitoring camera should comply with local
regulations. d. The installation position should facilitate the replacement
and maintenance of the Micro SD card and standard SIM card.
5. Choose a suitable installation position based on the vehicle’s
environment. This document serves as a reference only.
2 / 16
MettaX Digital (Shenzhen) Co., Ltd.
6. Select the appropriate power connection method based on the vehicle’s
environmental conditions. Power connection should be performed by
professionals, as improper operation of the vehicle’s power system by non-
professionals may be dangerous. This document serves as a reference only. 7.
If any issues arise during the installation of special vehicles, please
contact the product supplier promptly for support. 8. During installation, the
Mxtool application is required for debugging and configuring the MC401L. 9.
Scan the QR code below or search for and download the MXTool application from
the application store. Once downloaded, you can connect the application to the
MC401L to configure the device’s operational parameters.
Android
3 / 16
MettaX Digital (Shenzhen) Co., Ltd.
1.System Overview
1.1Product Overview MC401L is an smart dash cam with built-in single recording
cameras. It helps drivers
reduce traffic accidents and assists fleet management in improving efficiency.
Based on artificial intelligence technology, it can proactively detect
dangerous driving events and unsafe driving behaviors. It supports sending
local real-time alerts to the driver to avoid risks and uploads the events to
the fleet management platform for driver training. It transmits real-time and
accurate vehicle location information and operational data to the fleet
management platform. It provides high-quality remote intercom and real-time
video playback, making fleet management easier and more efficient.
This product is suitable for various weather conditions such as day and night,
sunny, and rainy. It can be installed in vehicles such as buses, taxis,
passenger cars, trucks, hazardous goods transport vehicles, school buses, dump
trucks, and sanitation vehicles. 1.2. Schematic diagram powered by standard
power cable:
4 / 16
MettaX Digital (Shenzhen) Co., Ltd.
2. Installation Preparation
2.1 Installation Technical Requirements
Relevant personnel should be familiar with the product’s features,
applications, and overall composition.
Relevant personnel should have knowledge of vehicle circuits, structures, and
commonly used installation methods for in-vehicle devices.
2.2 Understanding the Installation Environment
Before equipment installation, relevant personnel should have a clear
understanding of the vehicle model, installation position of the device, cable
types and lengths required for different vehicle models, and the list of
commonly used auxiliary materials. This ensures the smooth completion of
equipment installation and debugging.
2.3 Vehicle Condition and Related Electrical Information
Confirmation of vehicle information is the basic prerequisite for successful
installation and the assurance of role allocation to avoid vehicle damage. For
each component, the next step can only proceed after clear confirmation, with
confirmation by the vehicle responsible person and the installation personnel
for each operation.
(1) Check for any damage to the vehicle’s exterior and interior components.
(2) Check if the vehicle can be started normally. (3) Check the status of the
vehicle’s power supply system.
*Note: Confirming the above information is crucial. Installation can only proceed after confirmation of normal conditions.
2.4 Vehicle Power Connection
It requires the operation of professional installers. The following mainly
describes the method of connecting the vehicle’s power supply according to the
product’s power cable requirements.
(1) Tools required: multi-meter.
5 / 16
MettaX Digital (Shenzhen) Co., Ltd.
(2) Selection of Power Connection Location When the vehicle is parked and
ignition is OFF, use a multi-meter to check if the circuit is powered. If it
is positive, it is determined to be a constant power supply, and then measure
the voltage. When the vehicle is parked but the ACC is ON or ignited position,
use a multi-meter to check if the circuit is powered. If it is negative when
ACC is OFF and positive when ACC is ON, it is determined to be the ACC cable,
and then measure the voltage. (3) Voltage Measurement at Power Connection
Point Constant Power Supply: With the vehicle is parked and ignition is OFF,
use a multi-meter to measure the voltage of the constant power supply cable,
which is approximately 24 V or 12 V. If multiple cables have voltages within
this range, select the cable with higher current as the constant power supply
connection cable. ACC: When the vehicle ACC is in the ON position or ignited
state, use a multi-meter to measure if the voltage is 24 V or 12 V. If it is 0
in the OFF state and 24 V or 12 V in the ACC ON position or ignited state,
select the cable as the ACC power supply connection cable.
*Note: When connecting the power supply, measure the positive and negative terminals of the power supply first with a multi-meter to avoid errors.
6 / 16
MettaX Digital (Shenzhen) Co., Ltd.
3. Preparation for Installation Materials and Tools
3.1 Package Inventory Check After unpacking the product, please ensure the
device is intact and all accessories are
included.
3.2 Installation Materials and Tools
Before installation, the following installation accessories and tools shall be made available Installation Materials and Tools List
Image
Name
Uasage
Quantity
Common Screwdriver
1
Tighten screws, optional
1pcs
Kit
7 / 16
MettaX Digital (Shenzhen) Co., Ltd.
2
Crowbar
Pry up the vehicle panel
1pcs
As per
3
Ties
Bundle cables
needs
4
Cleaning Cloth
Clean the dashboard
1pcs
Install the Mxtool App for
video
5
Android Phone
1pcs
preview and parameter
configuration
Measure the installation
height of the ADAS camera
6
Measure Tape
1pcs
and assist the installation in
other scenarios
7
Mark Pen
Mark lines for installation
1pcs
8
Cutting nippers
Cut and strip wires
1pcs
9
Insulated rubber tape
Wrap wire ends
1pcs
Cut insulated rubber tape or
10
Scissors
1pcs
wire clip
11
TF Card Reader
For future use
1pcs
Locate vehicle power supply
12
multi-meter
Measure the conduction of
1pcs
harness
Measure pulse signal
8 / 16
MettaX Digital (Shenzhen) Co., Ltd.
13
3M adhesive tape
Fix DMS Camera
1pcs
Help to install the BSD
14
Three legged ladder
1pcs
camera
Waterproof backfill after
15
Waterproof sealant
1pcs
punching
Waterproof protection for
16
Waterproof tape
1pcs
outdoor wire connectors
3.3 Preparing standard SIM Card and Micro SD Memory Card
To ensure proper online communication and data storage of the device, please
prepare a compatible Micro standard SIM card and a Micro SD memory card that
meets the quality requirements before installation.
9 / 16
MettaX Digital (Shenzhen) Co., Ltd.
4. Installation
4.1 Installing standard SIM Card and Memory Card Installing the standard SIM
card and Micro SD card as shown in the following diagram
(pay attention to the insertion direction of these cards). During
installation, make sure it feels smooth and flexible. When pushing the card,
you should hear a clear “click” sound, indicating that the card is correctly
inserted. If you feel significant friction or resistance during installation,
it means the card is inserted in the wrong direction. In such cases, promptly
remove the card to avoid damaging it.
If the Micro SD card and standard SIM card are too small to be inserted into
the slot manually, you can place the card into the slot and then use the
included pry tool to push it in.
[Diagram: Insertion of standard SIM card and Micro SD card
*Note: Due to the operating temperature range of the device from -20°C to +70°C, the Micro SD card and standard SIM card should be able to work properly for an extended period in harsh environments. Specifically, the metal contacts on consumer-grade Micro SD cards and standard SIM cards are prone to oxidation under prolonged exposure to heat, humidity, or salt spray conditions. Frequent insertion and removal of cards can lead to contact wear, and the card slot can experience deformation or bending under constant pressure, resulting in poor contact. Therefore, if you are using a standard SIM card, for industrial equipment, industrial plastic or ceramic M2M cards (MP2/MP3/MS1 grade) with a working temperature range of 40°C to 105°C is recommended. If using a Micro SD card, an industrial-grade Micro SD card
10 / 16
MettaX Digital (Shenzhen) Co., Ltd.
should be used, which offers strong stability and can be used within a wide
temperature range (-40°C to 85°C). For safety purposes, when purchasing the
device, it is recommended to use Micro SD cards that have been verified by our
company. If you choose to purchase unverified Micro SD cards, there may be a
risk of damaging the device, thus affecting its lifespan.
(2) Before installing the standard SIM card, please check the metal contact
surface of the standard SIM card for any dirt (such as dust, fingerprints, or
watermarks). If there is any, use a non-woven cloth or rubber to clean the
surface.
(3) When installing the standard SIM card, avoid touching the metal surface of
the standard SIM card with your hands to prevent contamination from dust and
sweat.
After installing the standard SIM card and Micro SD card, tighten the card
slot panel and the screws.
Once the standard SIM card and Micro SD card are installed, remove the lens
protective film from the front and rear lenses of the device, as shown in the
diagram below.
4.2 Choice of Installation Area for the Main Unit The installation area
requirements for MC401L are as follows: (1) The device must be installed in
the middle of the windshield. Typically, it is installed in
the area above the center line of the windshield, in the vicinity of the rear-
view mirror. If it is not possible to install the device in the middle as
required, a deviation of less than 5 cm to the left or right is allowed (the
deviation of the device relative to the center line of the windshield is
calculated using the center line of the front lens).
(2) The lens of the road condition monitoring camera must be within the
working range of the left and right windshield wipers (ensuring that the
screen of the road condition monitoring lens is clean and free from stains).
11 / 16
MettaX Digital (Shenzhen) Co., Ltd.
(3) It is recommended to avoid installing other electronic devices, including
smart rearview mirrors, electronic tags, etc., around the device, as it may
affect the device’s positioning signal.
The installation position should ensure that the main unit does not obstruct
the driver’s view of the front blind spot reflector, and there are no
obstacles (such as the interior rear-view mirror or glass coating) in front of
and around the camera lens in the driver’s cabin monitoring view.
The general selection of the installation area is shown in the diagram below:
[Diagram: Installation area for the main unit] 12 / 16
MettaX Digital (Shenzhen) Co., Ltd.
4.3 Installation of the main unit. 1. Park the vehicle on a level surface. 2.
Clean the inside and outside of the target installation area on the windshield
using an
alcohol swab. Ensure that there is no dirt or debris on the glass that could
obstruct the view of the road condition monitoring lens. Make sure the glass
is dry.
3. Remove the protective film from the 3M tape of the mounting base and
attach it to the windshield
5. Press device firmly against the windshield for 10 seconds, ensuring that
there are no air bubbles between the main unit and the glass.
4.4 Adjustment and Fixation of the device When fix the camera, ensure that the
cabin camera screen meets the following conditions: a) The center of the cabin
should be positioned in the middle of the screen. b) The cabin screen should
be horizontal. c) The vehicle’s steering wheel should be displayed in the
lower left/right corner of the screen. The properly adjusted cabin monitoring
camera rendering is shown below:
d) MC401L supports two additional external remote cameras, please select the
matching camera to install in the appropriate position according to the actual
requirements.
*Note: Only when the device is securely connected to the vehicle, can the device be powered on. If the device is fixed after power connection, it should be powered on again before testing or use.
13 / 16
MettaX Digital (Shenzhen) Co., Ltd.
4.5 Power Connection, Signal Cable, and Cable Connection Connect the
power/ACC/GND to the vehicle’s power supply line.
*Note: The power line should preferably be connected using “dedicated non-stripping connectors”
(no need for stripping, to avoid the risk of electric leakage) and wrapped
with insulating tape to prevent electric leakage/short circuit. If there are
no special non-stripping connectors available, stripping wires can also be
used for the connection. In this case, the connection process must comply with
standard specifications. After the connection is completed, wrap it with
insulating tape to avoid electric leakage/short circuit.
14 / 16
MettaX Digital (Shenzhen) Co., Ltd.
5.Device configuration
After the device is powered on, adjust it using the mobile app MXTool. Please
refer to MXTool user manual for instruction.
6. Acceptance and Cleaning
6.1 Cleaning Clean up the installation site, collect and remove tools and
waste materials. Return any
original items to their original positions in the vehicle. The installation
work is now complete.
6.2 Installation Acceptance Conduct acceptance based on the acceptance
checklist provided by the customer,
focusing on the installation details and parameter settings. (1) Pay close
attention to the parameter settings and take screenshots for documentation.
(2) Verify the video image quality and capture and save sample videos. After
the installation is complete, take photographs of all the devices and the
central
console. (1) Capture installation position photos of all components. (2) Take
a rendered photo of the cabin after the installation is complete.
15 / 16
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>