ZLINE Kitchen DWV Tallac Dishwasher Instruction Manual
- July 4, 2024
- ZLINE Kitchen
Table of Contents
DWV Tallac Dishwasher
“`html
Specifications:
-
Product: TALLAC DISHWASHERS DWV MODELS
-
Manufacturer: ZLINE Kitchen and Bath
-
Website: www.zlinekitchen.com
-
Features: Attainable Luxury, innovative designs, unparalleled
quality -
Materials: High-end luxury designs with professional
features -
Warning: Contains Diisononyl phthalate (DINP) – check
www.P65Warnings.ca.gov for more information
Product Usage Instructions:
Important Safety Instructions:
Read all safety instructions before installation and operation.
Failure to follow instructions may result in property damage,
injury, or death.
Before Installation:
1. Check for electric shock hazards.
2. Ensure you have all necessary tools for installation.
3. Verify cutout dimensions for proper fit.
Installation:
1. Follow the installation manual provided.
2. Connect water and power supplies as per guidelines.
3. Ensure proper ventilation for the dishwasher.
Warranty:
1. Refer to the warranty information provided with the
product.
2. Follow warranty procedures for any issues or
malfunctions.
FAQ:
Q: What should I do if hot water or steam escapes when opening
the door?
A: Always use caution when opening the door during or after a
wash cycle to avoid injury from hot water or steam.
Q: How can I dispose of the dishwasher safely?
A: Ensure the appliance poses no danger to children before
discarding it. Follow local regulations for safe disposal of the
dishwasher.
“`
Installation Manual
TALLAC DISHWASHERS DWV MODELS
www.zlinekitchen.com
ZLINE Kitchen and Bath provides Attainable Luxury, where the kitchen and bath of your dreams is never out of reach. Through our unique designs and unparalleled quality, we’re dedicated to providing you an elevated experience in the heart of your home. With an endless selection of features and finishes, our inspiration is your reality.
ZLINE is fueled by a passion for innovation; A relentless pursuit of bringing
the highest end luxury designs and professional features into everyone’s
homes.
Because we continually strive to improve our products, we may change
specifications and designs without prior notice.
Scan the QR code to view the most up-to-date version of the Installation
Manual and User Manual.
WARNING: This product can expose you to chemicals including Diisononyl
phthalate (DINP) which is known to the State of California to cause cancer.
For more information go to www.P65Warnings.ca.gov.
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . 1
BEFORE INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 6
Electric Shock Hazard . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 6 Tools You May Need . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 7 Cutout Dimensions . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 10
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 11
Adjusting Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 12 Water Supply Connection. . . . . . . . . . . . . . . . . . . . . . . .
. . . . 14 Steam Protection Foil . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 15 Installing the Dishwasher into the Cabinet Cutout . . . . . .
. . . . . . . . . 16 Drain Hose Connection . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 17 Adjusting the Kick Plate . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 20 Installer Checklist . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 26
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 27
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 28
IMPORTANT SAFETY INSTRUCTIONS
If the information in this manual is not followed exactly, a fire or explosion
may result causing property damage, personal injury, or death.
WARNING
When using the dishwasher, carefully follow the precautions in this manual. These are provided in order to save time and effort and to help ensure optimum dishwasher performance. Be sure to observe all listed warnings and cautions. Look carefully at WARNING icons with an exclamation mark inside.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
WARNING
CAUTION: Indicates a potentially hazardous situation which, if not avoided,
may
CAUTION result in injury. It may also be used to alert against unsafe
practices.
NOTICE:
NOTICE
Indicates a potentially hazardous situation which, if not avoided, may result in damage to the dishwasher, the tableware, the equipment, or the environment.
General Safety
1
IMPORTANT SAFETY INSTRUCTIONS
Read these safety instructions completely before installation and operation
and follow them carefully. Save these instructions and pass them on to any
future user.
WARNING CAUTION NOTICE
· In addition to these instructions, the dishwasher shall be installed in
accordance with all local codes, or in absence of a local code: · In the
United States, with the National Electric Code ANSI/NPA70-latest edition. · In
Canada, with the Canadian Electric Code C22.1-latest edition/Provincial and
Municipal codes and/or local codes.
When installing the dishwasher, follow basic precautions, including: · Please
check the standards and local codes for dishwasher placement. · Installation
and repair should be performed by a qualified installer, such as an insured
licensed plumber or contractor. Installation performed by non-professionals
could be dangerous and result in improper installation and property damage,
which may void the warranty. · The information in this user manual must be
followed to minimize the risk of fire or explosion and to prevent property
damage, personal injury, or loss of life. · To reduce the risk of electric
shock, fire, or injury, the installer must ensure that the dishwasher is
completely enclosed at the time of installation. · Never connect the ground
wire to gas lines, hot water pipes, or plumbing lines. · Only connect the
dishwasher to the power supply when all installation and plumbing work is
complete. · Before installation or service, disconnect the power supply to the
work area by unplugging the unit, “tripping” the circuit breaker, or removing
the fuse. · If the dishwasher is installed in a location that experiences
freezing temperatures (e.g. in a vacation home, cabin, etc.), drain all the
water from the unit’s interior if not using the unit for extended periods.
Water system ruptures that occur as a result of freezing are not covered by
warranty. · The dishwasher must be secured to adjacent cabinetry using the
brackets provided. Failure to do this may cause damage to property or bodily
injury. · Ensure that any plastic wrappings, bags, small pieces, etc., are
disposed of safely and kept out of the reach of children to prevent risk of
suffocation or other serious injury.
2
General Safety
IMPORTANT SAFETY INSTRUCTIONS
· Remove the door to the washing compartment when removing an old dishwasher
from service or discarding it. Ensure that the appliance presents no danger to
children while being stored for disposal.
· The dishwasher drain hose must be installed with a drain loop at least 30″
(762 mm) off the cabinet floor or an appropriate air gap device. Otherwise,
the dishwasher may not drain properly.
· This dishwasher is intended for residential use only and should not be used
in commercial establishments. This appliance is not applicable for outdoor
usage. The manufacturer disclaims responsibility for damage or injury caused
by improper use of this appliance.
· Do not operate the appliance if it’s damaged, malfunctioning, partially
disassembled, or has missing or broken parts. If the unit arrives damage,
contact ZLINE at 1-614-777-5004 for
help.
· If the dishwasher is a new installation, please note that most of the work
must be done before the dishwasher is moved into place.
· If the dishwasher is replacing another dishwasher, check the existing
dishwasher connections for compatibility with the new dishwasher and replace
parts as necessary.
· Use only detergents or wetting agents recommended for use in a dishwasher
and keep them out of the reach of children.
· The manufacturer reserves the right to make changes to its products when
considered necessary and useful, without affecting the essential safety and
operating characteristics.
· Refer to the Installation Manual provided with your dishwasher for
additional installation details and safety measures.
· The serial number information is located on the right-hand side of the inner
door of the dishwasher. Example serial number label:
3
General Safety
IMPORTANT SAFETY INSTRUCTIONS
· When loading items into the dishwasher: · Locate sharp items so that they
are not likely to damage the door seal. · Load sharp knives with the handles
up to reduce the risk of cut-type injuries.
· Do not wash plastic items unless they are marked “dishwasher safe” or the
equivalent. For plastic items not marked, check the manufacturer’s
recommendations.
· Do not touch the heating element during or immediately after use. · Do not
operate the dishwasher unless all enclosure panels are properly in place. · Do
not tamper with controls. · Do not abuse, sit on, or stand on the door or dish
rack of the dishwasher. · The cup racks are designed to support cups, glasses,
and kitchen utensils. When the
cup racks are in the dishwasher, do not lean on or use the cup racks to
support your body weight. · Some dishwasher detergents are strongly alkaline.
They can be extremely dangerous if swallowed. Avoid contact with the skin and
eyes and keep children away from the dishwasher when the door is open. ·
Consult Poison Control or a doctor if detergent has been swallowed or inhaled.
· Do not remove dishes from the appliance until the program is complete. Some
detergent may remain on the dishes. · Check that the detergent dispenser is
empty after the completion of each wash program. · Do not drink and play with
the water in the appliance. Harmful residues could be present. · To reduce the
risk of injury, do not allow children to play in or on the dishwasher. · Do
not leave the appliance with the open door unattended to avoid stepping
accidentally onto it. · Do not use high pressure water sprays and/or steam to
clean the appliance. · Ensure that there are no visible water leaks during and
after the first use of the appliance. · To avoid floor damage and possible
mold growth, do not allow wet areas to remain around or under the dishwasher.
4
General Safety
IMPORTANT SAFETY INSTRUCTIONS
To avoid risk of injury, always use caution when opening the door during or
following a wash cycle, as hot water or steam may escape.
CAUTION
· Do not store or use flammable liquids or vapors in the immediate surrounding
area of the dishwasher or on the appliance.
· Under certain conditions, hydrogen gas may be produced in a hot-water system
that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If
the hot-water system has not been used for such a period, before using the
dishwasher, turn on all hot-water faucets and let the water flow from each for
several minutes. This will release any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during this time.
· Please check the water supply line periodically. It is susceptible to
breakage. It becomes less flexible as time goes by. Replace it immediately
when it is torn, cut, swollen, or if there is water leakage.
· Please keep the dishwasher packaging out of the reach of children after
unpacking it.
RECYCLING · Old appliances may contain materials that can be recycled. Please
contact the local
recycling authority about the possibility of recycling these materials. ·
Remove the door to the washing compartment when removing an old dishwasher
from
service or discarding it. Ensure that the appliance presents no danger to
children while being stored for disposal. Before disposing the dishwasher:
· Disconnect the appliance from the main supply. · Cut off the main cable and
discard it. · Remove the door catch to prevent children and pets from getting
trapped in
the appliance.
5
Recycling
BEFORE INSTALLATION
WARNING
ELECTRIC SHOCK HAZARD · Connect the dishwasher to a properly rated, protected,
and sized power supply circuit
to avoid electrical overload. · The dishwasher is designed for a 120 VAC/60Hz
electrical supply connected to a
dishwasher-dedicated, properly grounded, electrical circuit with a fuse or
breakers rated for 15 amperes. · Do not use any extension cord or portable
outlet device to connect the dishwasher to a power supply. Using an extension
cord may void the warranty. · This appliance must be electrically grounded. In
the event of a malfunction or breakdown, grounding will reduce the risk of
electric shock by providing a path of least resistance for electric current. ·
This appliance is equipped with a cord having an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appropriate outlet that
is installed and grounded in accordance with all local codes and ordinances. ·
The manufacturer will not be responsible for any damage to property or to
persons caused by incorrect installation, improper use of the appliance, or
failure to heed the warnings listed. · IMPORTANT: The installer should leave
these instructions with the consumer who should retain for local inspectors’
use and for future reference.
Improper connection of the equipment-grounding conductor can result in WARNING
electric shock. Check with a qualified electrician or service representative
if
there is doubt whether the appliance is properly grounded. Do not modify the
plug provided with the appliance. If it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
6
Electric Shock Hazard
BEFORE INSTALLATION
TOOLS YOU MAY NEED
Pipe Wrench Hole Saw
Wire Cutter Hammer
Drill Wire Stripper
Tape Measure Adjustable Wrench
Torx Screwdriver Flathead Screwdriver
Phillips Screwdriver Scissors
Level
Brush
Pencil
MATERIALS YOU MAY NEED: (Please note additional materials may be required to
comply with local codes)
Hot Water Supply Line: Minimum 3/4″ O.D. copper tubing or metalbraided
dishwasher supply line
UL listed conduit connector or strain relief
Teflon tape or other pipe thread compound to seal plumbing connections
Shut-off valve and fittings appropriate for hot water supply line (copper
tubing/compression fitting or braided hose)
Silicone
Glue
7
Tools and Materials
BEFORE INSTALLATION
The parts required for installing the dishwasher are enclosed in plastic bags within this product’s packaging. Check that all of the following parts are included.
NAME
IMAGE
DISHWASHER PARTS BAG 1
QUANTITY
a. Hose Clamp
1
DISHWASHER PARTS BAG 2
b. Installation Manual
1
c. Steam Protection Foil
2
d. Adhesive Panel Strip (Left)
1
e. Adhesive Panel Strip (Right)
1
f. Hole Covers
4
DISHWASHER PARTS BAG 3
g. Screws 5/32″ x 1 5/8″
6
h. Screws 5/32″ x 19/32″
2
i. Mounting Bracket Left
1
j. Mounting Bracket Right
1
k. Mount Screws 5/32″ x 27/32″
2
DISHWASHER PARTS BAG 4
l. Kick Plate Bracket
2
m. Screws 5/32″ x 7/32″
2
n. U-Clip
4
o. Adjustable Plinth Cover
1
p. Metal Back Plate
1
q. Stopper Pin
2
Included Parts
8
BEFORE INSTALLATION
PRODUCT DIMENSIONS
DWV-18 Dimensions (18″ Model – Panel Ready)
DWV-24 Dimensions (24″ Model – Panel Ready)
SPECIFICATIONS
·17 5/8″ W x 21 3/4″ D x 32 1/8″ (min) – 34 1/8″ (max) H ·448 mm W x 552 mm D
x 816 mm (min) – 867 mm (max) H
·23 1/2″ W x 21 3/4″ D x 33 3/4″ (min) – 35 3/4″ (max) H ·597 mm W x 552 mm D
x 857 mm (min) – 908 mm (max) H
DWV-18
21 3/4″ (552 mm)
DWV-24
21 3/4″ (552 mm)
32 1/8″ – 34 1/8″ (816 mm – 867 mm)
33 3/4″ – 35 3/4″ (857 mm – 908 mm)
17 5/8″ (448 mm)
23 1/2″ (597 mm)
PRE-INSTALLATION NOTES: · When installing a ZLINE door panel (see instructions
on page 22), the depth of each
unit increases to 22 1/2″ (572 mm). The depth of each unit including the panel
and handle is roughly 24″ (610 mm). Depths may vary if you install a custom
panel. · Minimum and maximum heights take into account the legs, which can be
extended on both models by roughly 2″ (51 mm). · Minimum recommended cabinet
cut-out dimensions based on the panel ready specifications are outlined on
page 10. · While the depth cutout is based on standard cabinet depths of 24″
(610 mm), please note the depth of the unit itself is smaller. · In order for
the door panel of the dishwasher to be flush with the leading edge of the
counter top, the counter top must be at least 22 1/2″ (572 mm) deep. This
depth may vary if you install a custom door panel.
9
Product Dimensions
BEFORE INSTALLATION
CUTOUT DIMENSIONS
NOTE: Since kitchen layouts vary, ZLINE recommends consulting with a
professional installer to verify cabinet dimensions before installing the
appliance.
10
Cutout Dimensions
INSTALLATION
The mounting brackets in Parts Bag 3 must be used when installing the
dishwasher in the cabinetry. Use of any parts other than mounting brackets may
result in damage to property or bodily injury.
If the material (wood) under the countertop can be drilled or screwed into, align the brackets in this manner (below left).
If the material (granite, slate, stone, etc.) of the countertop cannot be easily drilled or screwed into, align the brackets in this manner (below right).
Place the two mounting brackets into the top corner of the dishwasher like so.
Mounting Brackets
Bend brackets at arrows to mount to side of cabinets
11
INSTALLATION
ADJUSTING HEIGHT 1. Before the dishwasher is placed into the cabinetry, the
two front legs will be completely
retracted. Adjust the legs by turning in the direction of the black arrows
(noted below) with a flathead screwdriver to allow for the unit to move
downwards. 2. For the back leg, using a Phillips screwdriver, turn the height
adjustment screw in the middle of the lower front panel as shown in the image.
Turning counter-clockwise (in the direction of the black arrow) will lower the
rear dishwasher leg, and turning clockwise will raise the rear leg. 3. Once
the front two legs and rear leg are lowered, move the dishwasher into the
cabinetry and adjust the legs as necessary to balance and raise the dishwasher
to the enclosure height. 4. Make sure the dishwasher is plumb with the
countertop above. · NOTE: When engaging the rear leg adjustment screw, if it
doesn’t move, hold and pull the leg with your free hand (or use a helper) to
loosen the leg before installing. DWV-18 MODEL
If height of the enclosure is 32 1/8″ (816 mm) to 34 1/8″ (867 mm), use the
short leg supports as shown in the figure above.
If the height is above 34 1/8″ (867 mm), use the long leg supports as shown in
the figure above.
12
Adjusting Height
INSTALLATION
DWV-24 MODEL If the height of the enclosure is 34″ (864 mm) to 36″ (914 mm),
use the short leg supports as shown in the figure below.
If the height of the enclosure is above 36″ (914 mm), use the long leg
supports as shown in the figure below.
Using a level, be sure to check the dishwasher is level front to back and
square to the floor and countertop. NOTE: The dishwasher legs can be adjusted
up to 2″ (51 mm) taller or shorter depending on the height of your cabinet
cutout. Adjust accordingly to ensure the unit is plumb.
13
Adjusting Height
INSTALLATION
WATER SUPPLY CONNECTION The water supply may be connected to the dishwasher in
one of two ways: · With a metal-braided hose. · With copper tubing. Braided
Hose/Copper Tubing: · After connections are made, turn on the water supply to
check for leaks. · Hot water supply line: Use minimum 3/4″ O.D. copper tubing
or metal-braided
dishwasher supply line. · Water Inlet valve of the dishwasher has a
3/4″-11.5NH inlet coupling thread dimension
according to ASME B1.20.7-1991. · When buying a water inlet hose for the
dishwasher, please choose the thread dimension
of the inlet hose that is compatible with the indicated water inlet valve
inlet coupling thread dimension (3/4″-11.5NH) of the dishwasher. ·
Temperatures required for soldering and sweating will damage the dishwasher’s
water inlet valve, so if any such operation is needed, keep the heat source a
minimum of 7″8″ (178 mm203 mm) away from the dishwasher’s water inlet valve.
· There should not be any sharp bends in the water line, as this may restrict
the water flow. · Teflon tape or pipe thread compound must be used for sealing
the connection. Before connecting the copper water supply line to the
dishwasher, flush it with hot water to clear any foreign material.
14
Water Supply Connection
INSTALLATION
STEAM PROTECTION FOIL Steam will escape when the dishwasher door is opened
during operation of the dishwasher and after completion of any of the unit’s
working cycles. In order to prevent the resulting steam from collecting and
damaging at the underside of the countertop, we recommend using the steam
protection foil provided with this unit. Fitting the Protection Foil Clean the
surface with a damp cloth. To install the steam protection foil (letter “c”
from the parts list on page 8), peel off the protective layer and carefully
apply the strip to the bottom of the cabinet above.
Steam protection foil must be applied where the steam escapes when door is
first opened.
CAUTION
Failure to install the steam protection foil during installation can lead to
damage to the cabinets and countertop.
15
Steam Protection Foil
INSTALLATION
INSTALLING THE DISHWASHER INTO THE CABINET CUTOUT Place the dishwasher in
front of the cabinet opening and get ready to connect all hoses and electrical
connections. · The electrical-supply receptacle for the appliance must be
installed in a cabinet or on a
wall adjacent to the undercounter space where the appliance will be installed.
· There should be an opening through the partition between the compartments
specified
in the above bullet point that is large enough for the electrical plug to pass
through. The longest dimension of the opening shall not be more than 1 1/2″
(38 mm). · The edges of the panel opening specified in the above bullet point
if made of wood should be made smooth and rounded. If the panel is made of
metal, it should be covered with a suitable edge protector or grommet (not
provided) made for this purpose by the manufacturer. · Care shall be exercised
when the appliance is installed or removed to reduce the likelihood of damage
to the power-supply cord and reduce risk of injury.
CAUTION
Make sure all hoses are pulled through the side opening of the cabinet, no hoses are kinked, and all slack is taken out as shown in the figure.
Dishwasher Placement
16
INSTALLATION
DRAIN HOSE CONNECTION 1. Check the parts on the sink where the drain hose will
be connected. 2. There are several ways to insert the drain hose into the
drain hose connector of the sink,
as shown in the following figures. Connect the drain hose in accordance with
the water pipe installation regulations in your region.
No Garbage Disposal
With an Air Gap
Air gap
Without an Air Gap
HDroasien hcolasemp
DHroasienchlaomupse
Hose clamp
Garbage Disposal
With an Air Gap
Air gap
Without an Air Gap
HDroasine hcolasemp
HDoraseinchlaomupse
Hose clamp
Drain Hose Connection
17
INSTALLATION
3. Check the size of the sink’s drain hose connector. If needed, cut the
drain hose so its end fits onto the sink connector (5/8″, 3/4″, or 1″ as shown
below). If the end of the drain hose does not fit onto the drain hose
connector of the sink, use an adapter (not provided), available at any
plumbing or hardware retailer.
If necessary, cut off the dotted line of the drain hose to fit the size. 4.
Slide the provided hose clamp over the end of the drain hose. Attach the drain
hose to the sink connector, slide the hose clamp to the end of the hose, and
then tighten the hose clamp. NOTE: Failure to use a hose clamp may cause water
leakage.
Use hose clamp for drain hose assembly to the sink.
18
Drain Hose Connection
INSTALLATION
5. If there is no air gap, you can install a high loop. Hang the high point of the drain hose as close as possible to the overflow level of the sink; this helps prevents backflow and foul smells resulting from standing water. The high point should be at least 30″ (762 mm) from the cabinet floor, as outlined below.
Sink
Dishwasher
Drain Hose
Min. 30″ (762 mm)
Min. 20″ (508 mm)
6. When drilling a hole for the drain hose through an adjacent cabinet panel,
use caution to not cause damage to the drain hose by any sharp edges of the
hole. If the panel is wood, be sure to sand any rough edges before routing the
drain hose through. If the panel is metal, be sure to protect the drain hose
by using a suitable edge protector or grommet (not supplied) made for this
purpose by the manufacturer.
7. Take caution not to damage the drain hose when installing the dishwasher
on the floor, wall, or cabinet. To prevent leaks or drainage problems, make
sure the drain hose is not damaged, kinked, or twisted.
8. IMPORTANT: Do not cut the wrinkled area of the drain hose to fit the size.
When arranging
the drain hose, take caution not to touch the sharp edges of the cabinet or
under-sink. · Be careful when cutting off the end of the drain hose, as there
is a risk of injury. Clean
around the sink’s drain connection so that it does not damage the hose.
Inspect the inside of the drain hose for any obstructions and remove if found.
Also, inspect the outside length of the drain hose for any damage, cuts, or
excessive creases. · When arranging the drain hose, make sure the drain hose
is not cut, torn, or broken by any sharp edges of the floor, the product
itself, or the cabinet. A damaged drain hose may cause water leaks.
Drain Hose Connection
19
INSTALLATION
ADJUSTING THE KICK PLATE Once the dishwasher is successfully installed, attach
the kick plate to the unit. The two-piece kick plate can be adjusted to the
height and depth needed for the kitchen. DWV-18 1. If the installed height of
the dishwasher is above 32 1/8″ (816 mm) using the short front
leg supports, install the metal back plate (letter “p” from the parts list on
page 8) at 5 1/4″ (133 mm) height. Using a Phillips-head screwdriver, secure
the back plate to the two kick plate brackets (l) using the 5/32″ x 7/32″
screws (m). DWV-24 1. If the installed height of the dishwasher is above 34″
(864 mm) using the short front leg supports, install the metal back plate (p)
at 5 1/4″ (133 mm) height. Using a Phillipshead screwdriver, secure the back
plate to the two kick plate brackets (l) using the 5/32″ x 7/32″ screws (m).
l
m p
20
Adjusting the Kick Plate
INSTALLATION
2. Depending on the overall height required to cover the remaining gap, the
plastic plinth panel (o) height can be adjusted in 3/8″ (10 mm) increments by
removing/adding each section. It is attached through the side holes of the
metal back plate and secured using the U-shaped clips (n) to hold the pegs.
o n
o The metal back plate and adjustable plinth panel should be assembled with
the kick plate brackets mounted as shown in the diagram below.
Adjusting the Kick Plate
q
3. Depending on the desired cabinet depth, the kick plate brackets’ depth can be set using
the stopper pins (q) inserted into the holes.
4. The panel assembly should be inserted into the corresponding rectangle slots above
21
both the front support legs.
INSTALLATION
INSTALLING THE OUTER PANEL After the dishwasher is properly connected to water
and electrical and is installed into your cabinet cutout, the final step is to
secure the outer panel onto the dishwasher door. 1. If necessary for a custom
outer panel, affix the panel mounting template provided with
the appliance to the inside of the outer panel, making sure the template is
straight so the drill holes line up.
After drilling holes as noted on the mounting template, remove the template
before completing installation onto the dishwasher door.
NOTICE
2. As shown in Figure A, drill each screw hole into the inside of the outer
panel using the points marked on the template, making sure not to drill deeper
than 15/32″ (12 mm). · Diameter of Drilling Bit: 5/64″ (2 mm) · Depth of
Drilling Bit: 15/32″ (12 mm)
NOTE: The use of the outer panel mounting template only applies to custom door
panels supplied by the customer. ZLINE-provided outer panels are pre-drilled
and therefore do not require the template to install.
22
Panel Installation
INSTALLATION
3. As shown in Figure B, fasten Mount Screws Ø 5/32″ x 27/32″ (k) into
positions III. 4. As shown in Figure B, install both Adhesive Panel Strips (d
and e).
Before attaching Adhesive Panel Strips, remove the white protective sheets.
These Velcro strips are meant to help hold the outer panel in place while you
NOTICE
fasten it to the dishwasher door. 5. Before mounting the outer panel onto the
dishwasher door, mount the handle on the
panel as shown Figure C. NOTE: The handle screws must be flush mounted below
the inside mating surface of the outer panel so that the panel can sit flush
against the dishwasher door.
23
Panel Installation
INSTALLATION
6. The upper section of the outer panel can be secured by the two mount
screws (k) fastened in step 3 by sliding the panel upward after aligning those
screws with the corresponding keyholes on the dishwasher door, shown with the
orange arrows in Figure D. Slide the panel upward until the top edge is flush
with the top of the dishwasher control panel. Once secure, the panel can swing
closed, shown with the yellow arrow in Figure D.
7. With the outer panel now attached to the dishwasher door, fully open the
door and, as shown in Figure E, fasten Screws Ø 5/32″ x 1 5/8″ (g) into the
six positions (I, III, and V) on the inside of the dishwasher door into the
pre-drilled holes on the panel. Before mounting Screws Ø 5/32″ x 1 5/8″ (g),
the existing screws in NOTICE positions I, III, and V on the door must be
removed.
Scan the QR code for a door panel installation tutorial.
24
Panel Installation
INSTALLATION
8. Depending on the weight of the assembled outer panel, the door spring
tension can be adjusted by the mechanism shown in Figure F. · If the door is
falling down, the mechanism must be turned clockwise in the direction of the
white arrow with a Phillips screwdriver. · If the door is swinging upwards,
the mechanism must be turned counter-clockwise in the direction of the black
arrow with a Phillips screwdriver. Minimum Phillips screwdriver diameter is
15/64″ (6 mm) for this application.
NOTICE
9. After adjusting the door tension, the holes can be covered with the four
provided adhesive hole covers (f).
10.Mounting brackets previously fixed to the dishwasher are also fixed in the
cabinetry with Screws Ø 5/32″ x 19/32″ (h).
11. Check whether the bottom of the door hits the toe kick of the kitchen
cabinet. · If the door hits the toe kick, cut the necessary section out of the
toe kick. · Apply silicone, sealant, or paint to the cut edge of the kitchen
cabinet toe kick so it does not absorb moisture.
Scan the QR code for a door spring tension tutorial.
25
Panel Installation
INSTALLATION
INSTALLER CHECKLIST The professional who installs this appliance must complete
and check the following: · The dishwasher is square and level. · The
dishwasher is fastened securely to the cabinetry. · The dishwasher door opens
and closes freely. The dishwasher door must close without
hitting any cabinetry or countertop. · The inlet water supply is turned on and
checked for leaks. · The drain hose has been connected and checked for leaks.
There must be no kinks or
obstructions in the drain hose. · The drain hose must be installed with a 30″
(762 mm) high drain loop for drain hook-ups
without any air removed. · The spray arms are free and rotate freely. · The
rinse cycle has been run. · The water level must be below the filter screen
after the end of the wash program. It is
normal to find some water in the drain filter area.
NOTE: If the installer connects the water drain hose to a trap spigot under
the sink, the plastic membrane must be removed. If the entire membrane is not
removed, remaining food can cause a blockage in the drain hose spigot. Ensure
a hose clamp is used to secure the hose to the spigot.
FINAL INSTRUCTIONS 1. Press the On/Off button to turn the dishwasher on. 2.
Power indicator light comes on. 3. Use the Program Select button to choose a
washing program. 4. Start the program with the Start/Pause/Cancel button. 5.
Run the dishwasher through one complete cycle. When the wash cycle is
completed, use
the On/Off button to turn the dishwasher off. 6. If the dishwasher does not
operate properly, refer to the Troubleshooting section. · If the unit does not
operate properly after following these steps, contact ZLINE at
1-614-777-5004 to schedule an
authorized service agent to inspect the new dishwasher for any function
related failure. · The manufacturer warranty does not cover installation,
conversion, or customer education service visits.
26
Installation Checklist
WARRANTY
COVERAGE ZLINE Kitchen and Bath (“ZLINE”) dishwashers have a one year parts
and service warranty.
ZLINE warranty periods begin from the original date of product delivery and
solely cover the original purchaser of the product, delivered new and in its
original carton. The limited warranty covers all parts and labor for necessary
repairs if any part of the product, or the product itself, proves to be
defective in materials or workmanship. The product must be deemed serviceable
via troubleshooting with the ZLINE Customer Experience team. All service on
ZLINE products under warranty must be performed by ZLINE-approved and ZLINE-
certified service providers unless otherwise specified by ZLINE. Service will
be provided during normal business hours. Products must be unobstructed and
accessible to the service provider at the time of service. ZLINE’s liability
is limited to the original purchase price of the product. Additional injuries,
losses, damages, or other inconveniences caused by product malfunction or
defects in materials are not covered under the terms of this warranty.
TERMS ZLINE warranties apply only to the original purchaser of a ZLINE product
installed for normal residential use. This is defined as a single-family,
residential dwelling in a non-commercial setting. Any warranty claim stemming
from installation, operation, or any other use within a commercial setting is
not covered under this limited warranty. Commercial settings include, but are
not limited to: schools, churches, hotels, restaurants, vacation rentals such
as Airbnb, daycare centers, private clubs, fire stations, common areas in
multi-family dwellings, nursing homes, food service locations, and
institutional food service locations such as hospitals or correctional
facilities.
This warranty is non-transferable and will not under any circumstance be
extended based on the date of installation — the warranty period takes effect
from the date of delivery and only covers the original purchaser. The warranty
applies only to products installed in the contiguous United States and the
District of Columbia. Failure to secure certified warranty service per these
terms will result in a forfeiture of the remaining warranty.
Out-of-pocket payments will not be reimbursed unless prior approval is
received from ZLINE and/or ZLINE-certified service contract partners.
Unapproved out-of-pocket payments for service will not be reimbursed. All
warranty procedures must be followed to maintain warranty coverage.
WARRANTY
If a product qualifies within the service window provided under these warranty
terms, and ZLINE is unable to repair the product or a defective part of the
product after a reasonable number of attempts, ZLINE reserves the right to
offer to replace the defective part or the product or provide the original
purchaser a full refund of the purchase price of the product (not including
installation, removal, or other charges that were not included in the original
purchase price).
The original purchaser of the product must provide the original proof of
purchase, including the purchase date, when filing a claim to obtain
replacement parts, service, or refunds. Additionally, the original purchaser
of the product must provide the serial number of the product when filing a
claim to obtain replacement parts, service, or refunds.
This warranty shall not apply to any ZLINE product in which the original
factory serial number has been removed, altered, or cannot be readily
determined for any reason. Further, ZLINE is not responsible for damage
resulting from, but not limited to: shipment, delivery, or improper
installation; negligence or improper maintenance, misuse, or abuse of the
product; unauthorized alteration, modification, or tampering with the product;
accident, fire, floods, pest infestations, pandemics, natural disasters, or
any other unpreventable or unexplained acts of nature, commonly referred to as
“acts of God”; flare-up fires or damages caused by improper electric supply,
electrical line current, voltage, or power surges; and service to correct
installation not in accordance with the instructions contained in ZLINE’s
product manuals and/ or with local government codes.
This warranty does not apply to aesthetic damage, scratches, or natural wear
caused by normal use; second-hand, open box products, or products purchased
from an unauthorized retailer; and damages or issues stemming from alteration
or tampering with the dishwasher, including, but not limited to, painting any
portion of the product’s interior or exterior and altering or otherwise
manipulating the power cord.
In the event service is dispatched, and it is discovered that the reported
issue is not covered under warranty based on the disclaimers above, the
customer will be responsible for all service fees. Failure to pay these fees
will result in the forfeiture of remaining warranty coverage.
WARRANTY
Information contained within ZLINE’s installation and user manuals, in
addition to product information included on ZLINE’s website and all related
digital listings, do not cover every possible condition and situation that may
occur during the installation or operation of ZLINE products.
ZLINE reserves the right to make changes at any time to its products when
considered safe, necessary, and useful. Always check the ZLINE website for the
most up-to-date version of its product manuals:
www.zlinekitchen.com/pages/manuals.
Do not install or operate any ZLINE product if it has missing or broken parts
or if it arrives damaged due to shipping. If ZLINE products arrive damaged,
contact ZLINE Customer Experience at
1-614-777-5004 for help. Failure to
report a damaged appliance prior to installation or operation may void the
warranty.
ZLINE disclaims responsibility for damage or injury caused by improper
installation or use of any of its products. ZLINE is under no obligation, by
law or otherwise, to provide concessions, including repairs, prorates,
rebates, discounts, or replacements, once the warranty has expired.
SERIAL NUMBER LOCATION
Please write down the model number and serial number of your appliance. Both
numbers are located on the rating tag located on the right-hand side of the
inner door of the dishwasher. The tag is visible when the dishwasher door is
open. Do not remove permanently affixed labels, warnings, or plates from the
product. This will void the warranty. You may also consider attaching your
receipt or proof of purchase to this manual.
WARRANTY
SERVICE For warranty service, please contact our Customer Service team at
1-614-777-5004 or visit
www.zlinekitchen.com/contact to utilize our online Customer Experience Portal.
Scan the QR code to view the most up-to-date version of our Installation
Manual and User Manual.
Need to purchase a part or accessory for your ZLINE product? Visit
www.zlineparts.com, ZLINE’s official parts distribution partner.
1.6.2
1-614-777-5004 www.zlinekitchen.com
contact@zlinekitchen.com