MettaX SC904 Digital Surveillance System User Manual
- September 17, 2024
- MettaX
Table of Contents
SC904 Digital Surveillance System
“`html
Specifications
-
GPS / BDS positioning monitoring
-
Local SD card recording
-
4G remote real-time video surveillance
-
IP-Camera support
-
DMS / ADAS / BSD integration
-
High-speed processor
-
Embedded Linux operating system
-
H.265 video compression / decompression
-
Supports up to 4 channels of high-definition video surveillance
recording -
1 video output and 1 VGA output
Product Usage Instructions
1. Product Installation
Ensure the device is securely mounted in the vehicle according
to the provided installation guidelines. Connect the power cable to
the appropriate power source.
2. Power Connection
Connect the power cable to the designated power source following
the recommended voltage specifications to ensure proper device
operation.
3. Firmware Upgrade
To upgrade the firmware, download the latest firmware version
from the manufacturer’s website and follow the provided
instructions for installation.
FAQ
Q: How many channels of video recording does the device
support?
A: The device supports up to 4 channels of high-definition video
surveillance recording with optional IP-camera support for
additional channels.
Q: Can I connect multiple accessories to the device?
A: Yes, you can connect compatible accessories such as
IP-cameras to expand the functionality of the device.
“`
MettaX Digital (Shenzhen) Co., Ltd.
M ettaX DInisgtailtlaatlioM(nSCU9h0se4enr Mzahneunal) Co., LTD
1 / 14
MettaX Digital (Shenzhen) Co., Ltd.
Contents
Introduction ……………………………………………………………………………………………………………………………3
1. Product Specifications ……………………………………………………………………………………………………… 4
2. Definition of Accessories and Interfaces ……………………………………………………………………………7
2.1 Inspection of Products and Accessories ……………………………………………………………………7
2.2 Panel Introduction ……………………………………………………………………………………………………..8
2.3 Interface Definition …………………………………………………………………………………………………… 8
LTD 3. Installation Instructions …………………………………………………………………………………………………….. 9 Co
., 3.1 SD Card & SIM Card …………………………………………………………………………………………………9 en ) 3.2
Antenna Installation …………………………………………………………………………………………………10 n zh 3.3 Debug
Screen Connection ………………………………………………………………………………………10 (Sh e 3.4 Camera
Connection ……………………………………………………………………………………………….. 10 i t al 3.5 ADAS / DMS
Installation and Debugging ……………………………………………………………….. 10 i g 3.5.1 ADAS
Installation ………………………………………………………………………………………….. 10 t t aX D 3.5.2 DMS
Installation ……………………………………………………………………………………………. 11
M e3.6 Power Connection ………………………………………………………………………………………………….. 12
3.7 Product Installation Place Requirements …………………………………………………………………12
3.8 Product Firmware Upgrade ……………………………………………………………………………………..12
4. Infrared Remote Control Key Description ……………………………………………………………………….. 13
2 / 14
MettaX Digital (Shenzhen) Co., Ltd.
Introduction
The device is an intelligent terminal product that combines various advanced
features such as GPS / BDS positioning monitoring, local SD card recording, 4G
remote real-time video surveillance, IP-Camera, DMS / ADAS / BSD, and more. It
seamlessly integrates real-time monitoring, production operation management,
command dispatch, and other functionalities. It is a cost-effective and highly
expanded device specifically developed for vehicle video surveillance and
remote monitoring.
It utilizes a high-speed processor, embedded Linux operating system, and
incorporates
D state-of-the-art technologies including H.265 video compression /
decompression, network LT technology, and GPS / BDS positioning. It supports
up to 4 channels of high-definition video o ., surveillance recording and
playback (with 4 channels of real-time 1080P AHD ) C high-definition input),
and optional IP-cameras can be added to achieve 5-channel recording en and
playback. It also features 1 video output (1 video output, 1 VGA output).
zh The device employs an exclusive pre-allocated car-specific file system
technology to h en address issues such as file fragmentation caused by
repeated erasures, storage system (S crashes, data loss, inability to locate
storage and file corruption, ensuring stable and complete it al data.
i g It records vehicle driving information and supports wireless data uploads.
When used with X D central software, it enables central monitoring, remote
management, and playback analysis t t a based on a centralized database, with
alarm integration capabilities. The product features a M e sleek design,
strong vibration resistance, flexible and convenient installation, powerful
functionality, and high reliability.
Notice
In order to ensure the safe use of the device and extend the service life of
the equipment, the user should fully consider the following factors during
installation:
- After receiving the product, please check the packages of the device and accessories in time. If you find any parts are missing, please contact the dealer in time.
- When installing and operating the equipment, comply with the specifications
of relevant
3 / 14
MettaX Digital (Shenzhen) Co., Ltd.
electronic products and the requirements of vehicles and other connected equipment.
- The installation and construction shall comply with the specifications, which can refer
to the relevant national or local standards.
- Please check the connected power supply voltage, which should fall within the range of
9V – 36V. To prevent equipment abnormalities due to voltage mismatch, it is recommended to
use an operating voltage of 12V or 24V.
- To receive best positioning signal, ensure that the receiving surface of the GPS
antenna faces upward without any metal objects above it. The antenna’s bottom should be
kept flat, with an inclination angle not exceeding 30 degrees. It is
recommended to position
TD the GPS antenna at the junction of the dashboard and windshield for optimal
performance. ., L 6) The MDVR device should operate within the temperature and
humidity range specified
Co by the technical indicators. n ) 7) The external wires of the devices
should have sufficient intervals and the protection of
zh e the jacket flame-retardant tube to ensure that the wires will not cause
electric leakage due to en wear or aging.
it al (Sh 1. Product Specifications
ig Item D Language
English
Parameters
t t aXOS
Linux
e Graphic Menu Operation Interface (OSD Menu), Character
MOS
Operation Interface
Superposition Function
Support Mouse and Remote Control Operation to Set System GUI
Parameters
Processor & CPU
CPU Memory
ARM Cortex CA9 Dual-Core +NPU@0.7 DDR 512M SD Card (Max. 512G)*2
Video
Video Input
4CH CVBS, 1.0Vp-p, 75
System
Video Output
1CH VGA, 1CH CVBS, 1.0Vp-p, 75, Support Full Screen and 4 / 5
4 / 14
MettaX Digital (Shenzhen) Co., Ltd.
Channels Segmentation
Video Standard PAL Standard, NTSC Standard
Video Compression H.264 / H.265 Compressed Format
Format
Preview Function
Single Channel, Support Multiple Channels Preview, Support Manual / Event Triggered Full Screen Display Function
Options: 1080P / 720P / D1 / HD1 / CIF
Video Resolution Total 1080P at 60 fps
ttaX Digital (Shenzhen) Co., LTD Audio M eSystem
Video Quality
Video Rate
Video Recording Mode
Audio Input Audio Output
Level 1 to 8 (Best level 1, Lowest Level 8) PAL: 100 frame/s , CCIR625 line,50 NTSC: 120frame/s, CCIR525 line,60 CIF: 256Kbps ~ 1.5Mbps, Multi Level Image Quality HD1: 600Kbps ~ 2.5Mbps, Multi Level Image Quality D1: 800Kbps ~ 3Mbps, Multi Level Image Quality 720P: 1Mbps ~ 4Mbps, Multi Level Image Quality 1080P: 1Mbps ~ 8Mbps, Multi Level Image Quality Default Automatic Recording, Support Ignition Recording, Alarm Recording, etc. 4 Channels Analog Audio 1 Channel with Built-in Power Amplifier (Internal and External Options Available)
Compressed Format G.711A
Recording Mode Simultaneous Recording of Audio and Video
Alarm Input
4-CH Input, 1 Panic Button
Alarm Output
1-CH Output
Communication Interface
1 USB Interface 2 RS232 Interface or 1 RS232 Interface or 1 RS485 Interface
Extension Interface
1* Voice Intercom Interface
5 / 14
MettaX Digital (Shenzhen) Co., Ltd.
Multi Function Control Panel can be Connected (Support 12V
Power-supply and RS232 Communication)
Wireless Transmission
Built-in 4G Wireless Transmission Function, TDD – LTE, FDD – LTE Wi-Fi: Wireless 802.11b / g / n Communication Module
GPS Location
Support Built-in GPS / BDS Module
G-Sensor
Built-in 3-axis Accelerometer
SD Card
2 Large Capacity SD Card Video, Maximum Support 512G
Support U Disk Upgrade, SD Card Upgrade, FTP Remote Automatic
D HDD zhen) Co ., LT Video Replay M et t aX Digit al (Shen AI Functions
Upgrade Mode Upgrade
USB
Front USB Interface, U Disk can be used to Upgrade Backup Data; Support USB Mouse
SIM Slot
1 SIM Slot
Video Search
Video Data can be Searched by Recording Time, Recording Method, etc.
Replay
Support Multiple Playback Speed Forward or Backward
ADAS
Lane Departure, Pedestrian Detection, Vehicle Distance Detection, etc
DMS
Fatigue Driving Test, Smoking, and Unsafe Driving Behavior Detection
BSD
Left Blind Spot Detection, Right Blind Spot Detection
360°
360-degree Panoramic View
Power Supply
Power Management
Adaptive Wide Power Input, with Overload, Under Voltage, Short Circuit, Reverse Connection and other Protection Functions; Support Timing on-off, Delay Shutdown Function
and Power
Input Voltage DC: +9V ~ +36V
Consumption Output Voltage +12V@1A, +5V@1A
Power Consumption
Normal Working State < 8W (Exclude External Sensor)
6 / 14
MettaX Digital (Shenzhen) Co., Ltd.
Work
Temperature -20 ~ +70
Environment
Humidity
8% ~ 90%
Security
Password Two Level Management of User Password and Administrator
Management
Access
Password
Platform Protocol
JT/T808-2011, JT/T808-2019 JT/T1076-2016, JT/T1078-2016
Appearance Size
120mm120mm46mm
Net Weight
450g
LTD 2. Definition of Accessories and Interfaces
o ., 2.1 Inspection of Products and Accessories
) C Before using this product, please check whether the product is damaged and whether the
en accessories are complete. If there is any missing, please contact your supplier. The lists of
n zh products and accessories are as follows:
h e NO
Items
Photos
Quantity
ital (S 1
Main Device
1pcs
M ettaX Dig 2
Power Cable
1pcs
3 20 Pin I/O Extension Cable
1pcs
4
WIFI Antenna
1pcs
5
4G Antenna
7 / 14
1pcs
MettaX Digital (Shenzhen) Co., Ltd.
6
BDS / GPS Antenna
1pcs
7
KEY
2pcs
8
Remote Control
1pcs
D 9
Mounting Screw
Co., LT 10
AV-IN (4-PIN)
nzhen) 2.2 Panel Introduction
M et t aX Dig it al (She Chart 1. Front
4pcs 1pcs
2.3 Interface Definition
Chart 2. Back 8 / 14
MettaX Digital (Shenzhen) Co., Ltd.
This paper mainly introduces the definition of power supply, I / O, audio and
video interfaces, as follows: 1) Definition of Power Interface
Co ., LTD 2) I / O Interface Definitions
Chart 3.
M et t aX Dig it al (Shenzhen) 3) Definition of Audio and Video Interface
Chart 4.
AV-IN 1~4 Camera Interface
AV-OUT Display Interface
3. Installation Instructions 3.1 SD Card & SIM Card
To unlock and open the front panel cover, use the included key. The SIM card
and SD
9 / 14
MettaX Digital (Shenzhen) Co., Ltd.
card interfaces are visible once they are opened. SD Card and SIM Card
Installation: Insert the SD card into the SD card slot with the
connecting finger upward and the SIM card into the SIM card slot. Then lock on
the cover.
3.2 Antenna Installation
Please correctly connect the 4G and GPS antennas. To achieve optimal
positioning performance, the receiving surface of the GPS antenna must face
upwards with no metallic objects above it. The bottom of the antenna should be
flat, and its tilt angle should not exceed 30 degrees. Attempt to place the
positioning antenna at the junction of the dashboard and
D windshield. ., LT 3.3 Debug Screen Connection
o During the debugging process, the device requires an external display screen
to assist in n ) C adjusting the camera angle and device’s online parameters.
The device supports signal h e output: CVBS. en z 3.4 Camera Connection
(Sh Connect channel 1 to 4 audio and video cameras. i t al ADAS / DMS
Function: This function has an alarm function for fatigue driving, lane i g
departure and other non-standard driving. When the driver is yawning, closing
his eyes, D smoking, playing with mobile phones, making phone calls and other
non-standard driving, this t t aX function will alarm through voice and upload
the alarm information. M e 3.5 ADAS / DMS Installation and Debugging
3.5.1 ADAS Installation 1) Installation Position: Take the center of the
windshield as the axis, move up and down
according to different vehicle types, and generally install at the lower point
(Note: Do not affect the use of the wiper).
2) Installation Method: There is a circle of 3M tape on the camera, which can
be directly pasted on the glass after tearing off the protective film;
3) The ADAS camera is installed in the center of the windshield and fixed with
3M tape (if the windshield is very inclined, it is installed in the position a
little above the center. If it is a
10 / 14
MettaX Digital (Shenzhen) Co., Ltd.
vertical windshield, it should be installed at the position a little below the
center. 4) The ADAS camera is an analog camera, which does not support hot
swap. You need to
connect the cable before powering on the main device. If the main device
already powered, then connect it to the ADAS camera, whether it is power
supply or data line power supply, then the ADAS camera will not work normally,
and the display screen can not see the ADAS image. At this time, you need to
restart the main device to return to normal. 3.5.2 DMS Installation
A. Installation Position: A-pillar of the cab 1) Installation Height
Requirements: 10-15cm below the horizontal line of driver’s eyes
TD (the camera should have a slightly inclined upward angle to look up at the
driver’s eyes, which ., L is better for fatigue detection).
Co 2) Installation Distance Requirements: Within the range of 70cm-100cm from
the driver’s n ) head.
zh e 3) Installation Method: Drill the base of the gimbals and fix it on the
A-pillar, use screws to en fix the lens on the gimbals, adjust the angle to
the display screen and fix the lens with the (Sh inner hexagon (the gimbals
can be adjusted up, down, left, and right, and the installation will it al be
more convenient).
i g 4) Installation Angle Requirements: Adjust the camera angle through the
video to make D the driver’s face up and down in the middle of the entire
video.
t t aX B. Installation Position: Car Dashboard M e1) Installation Angle:
Ensure the camera is within 30 degrees to the right of the driver’s
direct line of sight. The smaller the angle, the better. 2) Installation
Distance: The distance between the camera and the driver’s face should be
within the range of 60 cm to 120 cm. It is recommended to install the camera
at approximately 80 cm from the driver’s face.
3) Other Requirements: Ensure the DMS camera does not obstruct the driver’s
view or interfere with their operations. Ensure there are no obstructions such
as the steering wheel between the DMS camera
11 / 14
MettaX Digital (Shenzhen) Co., Ltd.
and the driver’s face. The DMS camera must remain level horizontally and
should not be tilted. While meeting the above conditions, the angle deviation
from the driver’s face should be
minimized. Ideally, the camera should face the driver directly.
3.6 Power Connection
- Connect the power to the device according to the definition of power line
interface. Before connecting, please check the connected power supply voltage,
which should be in the range of 9V – 36V, The recommended operating voltage is
12V or 24V to prevent the
D equipment from abnormal due to voltage mismatch. LT 2) The red line (positive pole) of the power supply is connected to the positive pole of the
o ., vehicle main control power supply. The black (negative) of the power supply should be ) C connected to the negative pole or ground of the vehicle power supply. When grounding, it is en necessary to ensure the good conductivity of the ground.The power supply (ignition) shall be zh connected to the ignition control cable, which has power only when the vehicle is h en running.Please connect the red line and the orange line together to the positive pole of the (S power supply when debugging the product with the power adapter. it al 3.7 Product Installation Place Requirements
Di g The device can be embedded into the dashboard of the car through the sleeve, and it can X also be fixed. Please pay attention to the following points during installation:
t t a 1) Waterproof: You should choose a location that is not suitable for water to ensure that M e the terminal is dry, and pay attention to keeping away from the air outlet of the air conditioner
to prevent condensation from accumulating inside the terminal when the temperature difference changes. - Earthquake Proof: the terminal cannot be suspended and installed in a position with large long-term vibration.
- Anti Interference: The terminal should be kept away from single equipment
such as audio-visual and intercom in the car to prevent conduction and
radiation interference.
3.8 Product Firmware Upgrade
12 / 14
MettaX Digital (Shenzhen) Co., Ltd.
-
Put the upgrade software into SD card / U disk.
-
Insert SD card / U disk with upgrade file.
-
Enter the system menu “System Information” to view the application program and MCU
version number.
- The upgrade version number should be different from the device current version
number, and the device will be upgraded automatically if the USB flash disk or SD card is
inserted.
- Do not power off or operate the device during the upgrade.
4. Infrared Remote Control Key Description
LTD Button ) Co ., Power
Description
Remote Control
This machine has no remote control
shutdown function.
n zh en Menu
Log in to the main page (operation of main menu interface)
(Sh e REW
Fast back key when playing back image file.
it al FWD et t aX Dig PTZ, M ZOOM-
Fast forward key when playing back video files. Play history video, Pause play and stop playing. Delete button, delete characters when
ZOOM+
editing, color adjustment value drops.
INFO
In the state of device information, you can go to the automatic test interface
Under the monitoring screen, it is used for
switching between four screens and single
screen; Press the “field” key to display 4
pictures; Press the number keys to switch to
single screen CH1, CH2, CH3 and CH4
13 / 14
MettaX Digital (Shenzhen) Co., Ltd.
respectively. Arrow keys, up, down, left, right, cursor direction movement
keys.
Enter
Enter the menu
Return
Return key: Return to the previous sub menu.
Cancel
Delete characters
[0-9] key: in the setting state, the number
input key is used to select numbers.
., LTD 0-9Number Co key
When previewing, keys 1, 2, 3, 4, 5, 6, 7 and 8 are used to switch to single screen of channel 1-8. When channel 8 is pressed or
en ) channel 1 is pressed up, channel 9 is
zh reached.
en Switch panel (only work for full video recorder
M ettaX Digital (Sh Model)
14 / 14