MettaX MC904A 4G 4-Channel Mobile DVR Owner’s Manual
- June 13, 2024
- MettaX
Table of Contents
MettaX MC904A 4G 4-Channel Mobile DVR
Product Information
The MC904A 4G 4-Channel Mobile DVR is a versatile and advanced device designed for various applications. It offers several key features to enhance your monitoring and recording needs. The product specifications include:
- 4-CH camera support
- Remote interaction capabilities
- Parking monitoring functionality
- Real-time recording capabilities
- BSD (Blind Spot Detection)
- Blind Area Monitoring
- DMS (Driver Monitoring System)
- ADAS (Advanced Driver Assistance System)
- Multiplex I/O for versatile connectivity
Product Usage Instructions
To use the MC904A 4G 4-Channel Mobile DVR effectively, follow these instructions:
- Hardware:
- Connect up to 4 cameras to the DVR for monitoring.
- Use the remote interaction feature to control and configure the DVR remotely.
- Enable parking monitoring to ensure continuous surveillance even when the vehicle is parked.
- Utilize the real-time recording feature to capture and store footage on the SD cards (up to 256GB).
- Take advantage of the BSD and Blind Area Monitoring functionalities to detect blind spots and ensure safer driving.
- Make use of the DMS and ADAS systems for driver monitoring and assistance.
- Connect external devices or sensors using the available I/O ports.
- Video and Encoding:
- Configure video settings for the cameras, including resolution (up to 1080P) and encoding format (H.264/H.265).
- Understand that the encoding capacity for all cameras combined reaches a maximum of 1080P at 100 frames per second.
- Ensure proper video standards (PAL, NTSC) are set according to your region.
- Utilize the G.711A audio encoding for clear audio recording.
- Network and Communication:
- Insert a compatible SIM card to enable 4G LTE connectivity (FDD LTE and TDD LTE bands).
- Utilize the available communication interfaces (RS232, RS485) for data exchange.
- Connect to a WiFi network using the supported 2.4GHz, 802.11 b/g/n protocol.
- Power and Certification:
- Ensure a stable power supply within the recommended range of DC +9V to +36V.
- Operate the DVR within the specified temperature range of -20°C to +70°C.
- Maintain a humidity level between 20% and 80% during operation.
- Consider the net weight of the device (726g) for installation and transportation purposes.
- Install the device with the provided dimensions (143mm x 133mm x 51mm).
- The MC904A 4G 4-Channel Mobile DVR is certified with CE/FCC standards.
INTRODUCTION
MC904A is a 4G MDVR that supports 4 channels of 1080p video input. It features a unique design without a hard drive and supports two 256GB SD cards. With its compact size, it is easy to install and transport. The device has an aluminum alloy shell, ensuring good heat dissipation. It supports emergency alarm function, 6-channel digital signal input, 1-channel digital signal output, and 1 RS232 and 1 RS485 serial ports for connecting various peripherals. Additionally, the device is equipped with built-in AI algorithms, supporting ADAS, DMS and BSD. It effectively helps drivers enhance transportation safety and reduce pedestrian and vehicle accidents.
Key Features
-
4-CH camera
The small size device supports up to 4 channels for cameras. Audio and video can be stored in two SD cards with a maximum capacity of 256GB each. -
Remote Interaction
While recording real-time audio and video, it can realize monitoring and interacting functions to meet the needs of different scenarios. -
Parking Monitoring
With high-precision stereo sensing G-SENSOR, information can be automatically recorded in the event of collision, shaking, vibration, etc. -
Real-time Recording
Lock onto vehicles to determine their speed, altitude, direction, and navigation, while also integrating real-time GPS data into the recorded footage. -
Blind Area Monitoring
Capturing pedestrians and non-motor vehicles in the blind spot of the vehicle through the blind spot monitoring camera, and issues an alarm to remind the driver to pay attention. -
Driver Monitoring System
Supports driver fatigue warning, distraction warning, yawning detection, seat belt detec- tion, smoking detection, using cell-phone detection, camera being covered. -
Driver Assistance
Supports forward collision warning, lane departure warning, pedestrian detection, close driving distance warning, and solid line lane-changing warning. Accura- cy exceeds 95%. -
Multiplex 1/0
Support up to 6 digital input interfaces, 1 digital output interface, 1 RS232 and 1 RS485 interface. External devices such as RFID reader, fuel sensors and PTZ can be integrated.
SPECIFICATION
- Hardware
- Positioning system Linux
- CPU Dual-Core processor 1.5T
- CPU Memory DDR3 8GB
- GNSS GPS+BDS(with external G-mouse)
- Memory SD card(Max. 256G)*2
- G-sensor 3-axis acceleration and 3-axis gyroscope sensor
- Speaker √
- Mic √
- Sim card Standard sim
- LED Power(Red), GPS(Blue), Net(Green), SD1&SD2(Green)
- Alarm I/O 6 input, 1 output.
- communication interface 1RS232 and 1 RS485 port
- Other 1-channel voice intercom interface, which can connect the voice handle
- Camera
- Video 4-CH CVBS, 1.0Vp-p, 75Ω, 1080P, 1-IPC camera
- ADAS Forward collisions, Lane departure, Pedestrian detection, vehicle distance detection, solid line -changing etc.
- DMS Camera cover, fatigue driving, smoking, distraction, seat belt detection.
- BSD Left blind area, right blind area detection.
- Video encoding H.264/H.265, default H.264
- Video standards PAL , NTSC
- Video resolution Encoding capacity for all cameras combined reaches a maximum of 1080P at 100 frames per second.
- Compression format G.711A
- Network 4G LTE
- MC904A-EU
- FDD LTE: B1/B3/B5/B7/B8/B19/B20
- TDD LTE: B38/B39/B40/B41 (100M)
- WCDMA: B1/B2/B5/B8
- GSM: 850/900/1800/1900MHz
- MC904A-American
- FDD LTE: B2/B3/B4/B5/B7/B12/B18
- TDD LTD: B38/B41(100M)
- WCDMA: B2/B4/B5
- GSM: 850/1800/1900MHz
- WIFI 2.4GHz, 802.11 b/g/n
- Protocol
- JT/T808-2011, JT/T808-2019
- JT/T1076-2016, JT/T1078-2016
- Others
- Power supply DC: +9V ~ +36V
- Operation Temperature -20℃ to +70℃
- Operation Humidity 20% to 80%
- Net weight 726g
- Dimension 143mm133mm51mm
- Certification CE/FCC