MettaX MC403L Video Telematics User Manual
- June 1, 2024
- MettaX
Table of Contents
MettaX MC403L Video Telematics
Specifications
- Product: MC403L
- Manufacturer: MettaX Digital (Shenzhen) Co., Ltd.
- Features: Smart dashcam with built-in single recording camera
- Suitable for: Various weather conditions, day and night, sunny, rainy
- Vehicle Compatibility: Buses, taxis, passenger cars, trucks, hazardous goods transport vehicles, school buses, dump trucks, sanitation vehicles
Product Usage Instructions
Preparation for Installation
Before starting the installation process, make sure to check the package
inventory and have all the necessary tools ready. Standard SIM card and Micro
SD memory card should also be prepared.
System Connection
Connect the MC403L to the vehicle’s power source according to the
appropriate method based on the vehicle’s environmental conditions.
Professional installation is recommended for power connection.
Device Configuration
Configure the settings of the MC403L according to your preferences and
requirements. This includes adjusting recording quality, time stamps, and any
other desired features.
Acceptance and Cleaning
After installation, perform a cleaning of the device to ensure clear
recording. Check the acceptance of the installation to ensure proper
positioning and functionality.
FAQ
-
Q: Can MC403L be used in all types of vehicles?
A: MC403L is suitable for various vehicles including buses, taxis, trucks, and more. Ensure compatibility with your vehicle before installation. -
Q: What weather conditions is MC403L suitable for?
A: MC403L is designed to work in different weather conditions such as day and night, sunny, and rainy.
Installation user manual
MC403L
Preamble
To guide engineers in the correct and efficient installation of MC403L and its
accessories, and to improve installation efficiency, this MC403L installation
Guide has been prepared.
This document primarily includes: Preamble, System Overview, Installation
Preparation, Installation Introduction, Acceptance, and Cleaning.
This document is intended for installation engineers.
We reserve the right to interpret this document and modify the information and
descriptions contained herein. In the event of any changes to the content of
this manual, no separate notification will be provided.
Important Notice
- Prior to installation, park the vehicle on level ground and turn off the engine (do not park the vehicle on slopes or inclined roads).
- Please carefully read the section on packing list and thoroughly inspect upon unpacking.
- Please carefully read the section on tool list and ensure the availability of installation tools prior to proceed the installation.
- Prior to installation, observe the vehicle’s surroundings and adhere to the following principles:
- The installation position and wiring of the product should not obstruct the driver’s visibility or adjustment of the rear-view mirror and sun visor.
- The lens for monitoring the road conditions ahead of the vehicle must be within the working range of the windscreen wipers.
- The installation position of the in-cabin driver monitoring camera should comply with local regulations.
- The installation position should facilitate the replacement and maintenance of the Micro SD card and standard SIM card.
- Choose a suitable installation position based on the vehicle’s environment. This document serves as a reference only.
- Select the appropriate power connection method based on the vehicle’s environmental conditions. Power connection should be performed by professionals, as improper operation of the vehicle’s power system by non-professionals may be dangerous. This document serves as a reference only.
- If any issues arise during the installation of special vehicles, please contact the product supplier promptly for support.
- During installation, the Mxtool application is required for debugging and configuring the MC403L.
- Scan the QR code below or search for and download the MXTool application from the application store. Once downloaded, you can connect the application to the MC401L to configure the device’s operational parameters.
System Overview
Product Overview
MC403L is an smart dashcam with built-in single recording cameras. It helps
drivers reduce traffic accidents and assists fleet management in improving
efficiency. Based on artificial intelligence technology, it can proactively
detect dangerous driving events and unsafe driving behaviors. It supports
sending local real-time alerts to the driver to avoid risks and uploads the
events to the fleet management platform for driver training. It transmits
real-time and accurate vehicle location information and operational data to
the fleet management platform. It provides high-quality remote intercom and
real-time video playback, making fleet management easier and more efficient.
This product is suitable for various weather conditions such as day and night,
sunny, and rainy. It can be installed in vehicles such as buses, taxis,
passenger cars, trucks, hazardous goods transport vehicles, school buses, dump
trucks, and sanitation vehicles.
System Connection
Schematic diagram powered by standard power cable:
Installation Preparation
Installation Technical Requirements
Relevant personnel should be familiar with the product’s features,
applications, and overall composition.
Relevant personnel should have knowledge of vehicle circuits, structures, and
commonly used installation methods for in-vehicle devices.
Understanding the Installation Environment
Before equipment installation, relevant personnel should have a clear
understanding of the vehicle model, installation position of the device, cable
types and lengths required for different vehicle models, and the list of
commonly used auxiliary materials. This ensures the smooth completion of
equipment installation and debugging.
Vehicle Condition and Related Electrical Information
Confirmation of vehicle information is the basic prerequisite for successful
installation and the assurance of role allocation to avoid vehicle damage. For
each component, the next step can only proceed after clear confirmation, with
confirmation by the vehicle responsible person and the installation personnel
for each operation.
- Check for any damage to the vehicle’s exterior and interior components.
- Check if the vehicle can be started normally.
- Check the status of the vehicle’s power supply system.
*Note: Confirming the above information is crucial. Installation can only proceed after confirmation of normal conditions.
Vehicle Power Connection
It requires the operation of professional installers. The following mainly
describes the method of connecting the vehicle’s power supply according to the
product’s power cable requirements.
-
Tools required: multi-meter.
-
Selection of Power Connection Location
When the vehicle is parked and ignition is OFF, use a multimeter to check if the circuit is powered. If it is positive, it is determined to be a constant power supply, and then measure the voltage.
When the vehicle is parked but the ACC is ON or ignited position, use a multimeter to check if the circuit is powered. If it is negative when ACC is OFF and positive when ACC is ON, it is determined to be the ACC cable, and then measure the voltage. -
Voltage Measurement at Power Connection Point
Constant Power Supply: With the vehicle is parked and ignition is OFF, use a multimeter to measure the voltage of the constant power supply cable, which is approximately 24 V or 12 V. If multiple cables have voltages within this range, select the cable with higher current as the constant power supply connection cable.
ACC : When the vehicle ACC is in the ON position or ignited state, use a multimeter to measure if the voltage is 24 V or 12 V. If it is 0 in the OFF state and 24 V or 12 V in the ACC ON position or ignited state, select the cable as the ACC power supply connection cable.
Note : When connecting the power supply, measure the positive and negative terminals of the power supply first with a multi-meter to avoid errors.
Preparation for Installation Materials and Tools
Package Inventory Check
After unpacking the product, please ensure the device is intact and all
accessories are included.
Installation Materials and Tools
Before installation, the following installation accessories and tools shall be
made available
The DMS camera is optional for MC403L, if you choose to install DMS camera, the following installation tools are required:
Preparing standard SIM Card and Micro SD Memory Card
To ensure proper online communication and data storage of the device, please
prepare a compatible Micro standard SIM card and a Micro SD memory card that
meets the quality requirements before installation.
Installation
Installing SIM Card and Memory Card
Installing the SIM card and Micro SD card as shown in the following diagram
(pay attention to the insertion direction of these cards). During
installation, make sure it feels smooth and flexible. When pushing the card,
you should hear a clear “click” sound, indicating that the card is correctly
inserted. If you feel significant friction or resistance during installation,
it means the card is inserted in the wrong direction. In such cases, promptly
remove the card to avoid damaging it.
If the Micro SD card and SIM card are too small to be inserted into the slot
manually, you can place the card into the slot and then use the included pry
tool to push it in.
Insertion of SIM card and Micro SD card
*Note
- Due to the operating temperature range of the device from -20°C to +70°C, the Micro SD card and SIM card should be able to work properly for an extended period in harsh environments. Specifically, the metal contacts on consumer-grade Micro SD cards and SIM cards are prone to oxidation under prolonged exposure to heat, humidity, or salt spray conditions. Frequent insertion and removal of cards can lead to contact wear, and the card slot can experience deformation or bending under constant pressure, resulting in poor contact. Therefore, if you are using a SIM card, for industrial equipment, industrial plastic or ceramic M2M cards (MP2/MP3/MS1 grade) with a working temperature range of -40°C to 105°C is recommended. If using a Micro SD card, an industrial-grade Micro SD card should be used, which offers strong stability and can be used within a wide temperature range (-40°C to 85°C). For safety purposes, when purchasing the device, it is recommended to use Micro SD cards that have been verified by our company. If you choose to purchase unverified Micro SD cards, there may be a risk of damaging the device, thus affecting its lifespan.
- Before installing the SIM card, please check the metal contact surface of the SIM card for any dirt (such as dust, fingerprints, or watermarks). If there is any, use a non-woven cloth or rubber to clean the surface.
- When installing the SIM card, avoid touching the metal surface of the SIM card with your hands to prevent contamination from dust and sweat.
After installing the SIM card and Micro SD card, tighten the card slot panel and the screws.
Once the SIM card and Micro SD card are installed, remove the camera lens protective film.
Choice of Installation Area for the Main Unit
The installation area requirements for MC403L are as follows:
- The device must be installed in the middle of the windshield. Typically, it is installed in the area above the center line of the windshield, in the vicinity of the rearview mirror. If it is not possible to install the device in the middle as required, a deviation of less than 5 cm to the left or right is allowed (the deviation of the device relative to the center line of the windshield is calculated using the center line of the front lens).
- The lens of the road condition monitoring camera must be within the working range of the left and right windshield wipers (ensuring that the screen of the road condition monitoring lens is clean and free from stains).
- It is recommended to avoid installing other electronic devices, including smart rearview mirrors, electronic tags, etc., around the device, as it may affect the device’s positioning signal.
The installation position should ensure that the main unit does not obstruct the driver’s view of the front blind spot reflector, and there are no obstacles (such as the interior rearview 18 mirror or glass coating) in front of and around the camera lens in the driver’s cabin monitoring view.
The general selection of the installation area is shown in the diagram below: Recommend installation area for the forward facing camera:
Installation of the main unit.
- Park the vehicle on a level surface.
- Clean the inside and outside of the target installation area on the windshield using an alcohol swab. Ensure that there is no dirt or debris on the glass that could obstruct the view of the road condition monitoring lens. Make sure the glass is dry.
- Peel off the 3M adhesive tape.
- Align the device with the target installation area on the windshield, following the direction indicated by the arrow on the bracket.
- Press device firmly against the windshield for 10 seconds, ensuring that there are no air bubbles between the main unit and the glass.
Adjustment and Fixation of the device
After the device has been mounted on the bracket, adjust the front facing
camera up and and down to an appropriate position then tighten the two screws
of the camera by screwdriver:
When fix the cabin camera, ensure that the screen meets the following conditions:
- The center of the cabin should be positioned in the middle of the screen.
- The cabin screen should be horizontal.
- The vehicle’s steering wheel should be displayed in the lower left/right corner of the screen.
The properly adjusted cabin monitoring camera rendering is shown below:
The MC403L supports maximum 4 cameras, please choose which type of the rest 3
cameras you required and which of the position you would like to install
inside or outside the vehicle.
*Note: Only when the device is securely connected to the vehicle, can the
device be powered on. If the device is fixed after power connection, it should
be powered on again before testing or use.
Power Connection, Signal Cable, and Cable Connection
Connect the power/ACC/GND to the vehicle’s power supply line.
*Note:
The power line should preferably be connected using “dedicated non-stripping
connectors” (no need for stripping, to avoid the risk of electric leakage) and
wrapped with insulating tape to prevent electric leakage/short circuit. If
there are no special non-stripping connectors available, stripping wires can
also be used for the connection. In this case, the connection process must
comply with standard specifications. After the connection is completed, wrap
it with insulating tape to avoid electric leakage/short circuit.
Device configuration
After the device is powered on, adjust it using the mobile app MXTool. Please refer to MXTool user manual for instruction.
Acceptance and Cleaning
Cleaning
Clean up the installation site, collect and remove tools and waste materials.
Return any original items to their original positions in the vehicle. The
installation work is now complete.
Installation Acceptance
Conduct acceptance based on the acceptance checklist provided by the customer,
focusing on the installation details and parameter settings.
- Pay close attention to the parameter settings and take screenshots for documentation.
- Verify the video image quality and capture and save sample videos.
After the installation is complete, take photographs of all the devices and the central console.
- Capture installation position photos of all components.
- Take a rendered photo of the cabin after the installation is complete.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>