GLOBAL INDUSTRIAL 812554 691WHh Lithium Iron Phosphate Battery User Manual

GLOBAL INDUSTRIAL 812554 691WHh Lithium Iron Phosphate Battery

Specifications

Product Usage Instructions

Operation and Usage

1. Check the Power: Turn on the power button to check the current power level.
2. Charging Steps: Plug the battery into the charging station ensuring full connection and turn on the station’s power switch.
3. Discharging Steps: Connect the battery to the docking station, ensure a secure connection, and turn on the station’s power switch.

Product Maintenance

1. New products should be fully charged before use.
2. Regularly check the power level when the battery is in stock.
3. Maintain at least 50% of power storage for long-term storage over three months.
4. If stored for more than 6 months, charge and discharge the product 1-2 times to extend battery life.
5. Charge the battery immediately after use.

Troubleshooting: The power Display Fails to Operate When Turning on the Power Switch If you encounter this issue, please ensure that the power button is fully functional and check if the connections between the battery and charging/docking stations are secure. If the problem persists, contact Customer Service for assistance.

Read the instructions carefully before use and follow the instructions pertaining to risk of fire, electric shock, or injury to persons. Keep these instructions in a safe location for future reference. For questions, visit globalindustrial.com or contact Customer Service at 1-800-645-2986

WARNINGS & PRECAUTIONS

• When plugging in or pulling out the battery, please be cautious about the operation to avoid pins and pinhole damage.
• The product should be kept away from fire, high-temperature environments, and humid and rainy environments during use and storage, otherwise it may lead to dangerous situations.
• Non-professionals should not disassemble it by themselves.
• DO NOT discard the product at the end of its service life. Recycle the product according to local laws and regulations.
• This product should be protected from rain, water immersion, moisture, and violent vibration during transportation.
• It cannot be used at an altitude exceeding 2000m.
• DO NOT drop, squeeze, or collide with the product, so as not to subject the product to external pressure, which may cause a short circuit of the internal circuit of the product and damage to the battery.
• After use, please turn off the battery in time to avoid self-consumption.
• Please use the battery with the matching charging and docking station.
• When the product accidentally drops into the water while using, please unplug the battery and place it in a safe and open area. The product shall not be turned on.
• While using or delivering the product, the power display should be carefully protected from strike.
• When the product is on, it is forbidden to touch pinholes at the bottom of the battery with hands or metal devices.

Technical Parameters

• Item Parameter
• Battery Capacity 691WH
• Cell LiFePO4 3.2V 27AH 8S1P
• DC Input 29.4VDC, 10A, 294W Max
• DC Outpu t 25.6VDC, 27A, 500W Max
• Ambient Temperature 32 to 104℉ (0 to 40℃)
• Product Size 14.657.764.72 inch（LWH）
• Product Net Weight 15.87 lbs (6.8KG)
• Product Gross Weigh t 16.98 lbs (7.7KG) 32 to 104℉ (0 to 40℃)
• Relative Humidity ≤80%
• Altitude ≤2000M
• Transport and Storage:
• Temperature : 5 to 131℉ (-15-55℃)
• Environment
  • Relative Humidity ≤93% (no condensation)
  • Atmosphere Pressure: 70kPa～106kPa

Package Contents

• Battery*1
• User Manual*1

Product Use and Function Instruction

This is a portable battery, applied in the charging and docking station. When plugging the battery into the docking station, the output power will be transformed to AC by the inverter inside. While the battery is out of power, it can be charged by being plugged into the charging station. What’s more, the product is installed with a power display for users to view the battery power at any time. With the LiFePO4 battery cell and intelligent BMS control system inside, the product has protections for over-temperature, overload output, shortcircuit output, and over-voltage charging.

Product Main Structure Composition

The portable battery is mainly composed of a plastic shell, battery, and power display.

Panel Function Description

Operation and Usage

1. Check the Power: Turn on the power button. When the power display starts, users can check the current power level.
2. Charging Steps: Plug the battery into the charging station and make sure that the pinholes on the bottom of the battery and pins on the charging station are completely connected. When the power display is on, the power switch of the charging station should be turned on to charge the battery (the power switch on the battery does not have to be turned on while charging).
3. Discharging Steps: Plug the battery into the docking station and make sure that the pinholes on the bottom of the battery and pins on the docking station are completely connected. When the power display is on, the power switch of the docking station should be turned on to power the load. When the power level is lower than 30%, it is recommended to fully charge the battery before use (the power switch on the battery does not have to be turned on while discharging).

Product Maintenance

1. New products should be fully charged before use.
2. The power level should be checked regularly when the battery is placed in stock.
3. In the case of long-term storage for more than three months, not less than 50% of the power storage shall be maintained.
4. If stored for more than 6 months, to extend the service life of the battery, please charge and discharge the product 1-2 times.
5. Please charge immediately after use.

LiFe PO4 Battery 812554
Power Display Fails to Operate When Turning on the Power Switch It should be considered that the battery might be out of power at this time, and the battery is in sleep mode. You can charge it and then turn it on. If it is still not available, please stop using it immediately and contact the after- sales team.

Fail to Charge and Discharge
A. Make sure that the battery is fully plugged into the station, and pinholes at the bottom of the battery should be completely connected with pins on the station. B. Check whether pins on the station are deformed or falling off.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>