WiseNeT XNV-6083Z Network Camera User Manual
- June 3, 2024
- WISeNeT
Table of Contents
XNV-6083Z Network Camera
User Manual
XNV-6083RZ/XNV-8083RZ/XNV-9083RZ
XNV-6083Z/XNV-8083Z
Network Camera
Copyright
©2022 Hanwha Techwin Co., Ltd. All rights reserved.
Trademark
Each of trademarks herein is registered. The name of this product and other
trademarks mentioned in this manual are the registered trademark of their
respective company.
Restriction
Copyright of this document is reserved. Under no circumstances, this document
shall be reproduced, distributed or changed, partially or wholly, without
formal authorization.
Disclaimer
Hanwha Techwin makes the best to verify the integrity and correctness of the
contents in this document, but no formal guarantee shall be provided. Use of
this document and the subsequent results shall be entirely on the user’s own
responsibility. Hanwha Techwin reserves the right to change the contents of
this document without prior notice.
※ Design and specifications are subject to change without prior notice.
※ The initial administrator ID is “admin” and the password should be set when
logging in for the first time.
Please change your password every three months to safely protect personal
information and to prevent the damage of the information theft.
Please, take note that it’s a user’s responsibility for the security and any
other problems caused by mismanaging a password.
Important
Please check ‘Manuals’ from our website, before connecting to the Supply,
https://www.hanwha-security.com/en/data-center/download-data/
Warranty
Please check “Product warranty information” on our website.
https://www.hanwha-security.com/support/warranty/
We recommend using the officially compatible VMS version or the latest Hanwha
NVR version when integrating with VMS or Hanwha NVR.
Hanwha Techwin cares for the environment at all product manufacturing stages
and is taking measures to provide customers with more environmentally friendly
products.
The Eco mark represents Hanwha Techwin’s devotion to creating environmentally
friendly products and indicates that the product satisfies the EU RoHS
Directive.
Correct Disposal of This Product ( Waste Electrical & Electronic
Equipment)
(Applicable in the European Union and other European countries with separate
collection systems)
This marking on the product, accessories, or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of
waste and recycle them responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take these items for environmentally safe recycling.
Business users should contact their suppliers and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate
battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries
in this product should not be disposed of with other household waste at the
end of their working life. Where marked, the chemical symbols Hg, Cd, or Pb
indicate that the battery contains mercury, cadmium, or lead above the
reference levels in EC Directive 2006/66. If batteries are not properly
disposed of, these substances can cause harm to human health or the
environment.
To protect natural resources and to promote material reuse, please separate
batteries from other types of waste and recycle them through your local, free
battery return system.
SAFETY INFORMATION
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth. (Do not use a detergent or cosmetic products that contain alcohol, solvents or surfactants or oil constituents as they may deform or cause damage to the product.)
-
Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachments/ accessories specified by the manufacturer.
-
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
-
Unplug this apparatus during lighting storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
This product is intended to be supplied by a Listed Power Supply Unit marked “Class 2” or “LPS” or “PS2” and rated from PoE(53V), 0.43A. (XNV-6083RZ/XNV- 8083RZ/XNV-9083RZ)
-
This product is intended to be supplied by a Listed Power Supply Unit marked “Class 2” or “LPS” or “PS2” and rated from PoE(53V), 0.32A. (XNV-6083Z/XNV- 8083Z)
-
This product is intended to be supplied by isolation power.
-
If you use excessive force when installing the product, the camera may be damaged and malfunction.
If you forcibly install the product using non-compliant tools, the product may be damaged. -
Do not install the product in a place where chemical substances or oil mist exists or may be generated. As edible oils such as soybean oil may damage or warp the product, do not install the product in the kitchen or near the kitchen table.
This may cause damage to the product. -
When installing the product, be careful not to allow the surface of the product to be stained with chemical substance. Some chemical solvents such as cleaner or adhesives may cause serious damage to the product’s surface.
-
If you install/disassemble the product in a manner that has not been recommended, the production functions/performance may not be guaranteed.
Install the product by referring to “Installation & connection” in the user manual. -
Installing or using the product in water can cause serious damage to the product.
-
Although a rapid change in temperature could cause frost inside the dome, there will be no problem with the video.
-
This device has been verified using STP cable. The use of appropriate GND grounding and STP cable is recommended to effectively protect your product and property from transient voltage, thunderstroke, communication interruption.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION
GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT.
Apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
To prevent injury, this apparatus must be securely attached to the
Wall/ceiling in accordance with the installation instructions.
CAUTION
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
OVEREW
Class construction
An apparatus with CLASS construction shall be connected to a MAINS socket
outlet with a protective earthing connection.
Battery
Batteries(battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
The battery cannot be replaced.
Disconnection Device
Disconnect the main plug from the apparatus, if it’s defected. And please call
a repair man in your location.
When used outside of the U.S., it may be used HAR code with fittings of an
approved agency is employed.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
ATTENTION
IL Y A RISQUE D’EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UNE BATTERIE DE
TYPE INCORRECT.
METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS.
CAUTION
These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock do not perform any servicing other than
that contained in the operating instructions unless you are qualified to do
so.
When a new product box is opened (or during the initial use of the product),
moisture might build up on the glass of the camera. The built-up moisture
disappears naturally within a few hours after powered on.
Do not arbitrarily loosen or tighten the gore valve.
The ITE is to be connected only to PoE+ networks without routing to the
outside plant.
The wired LAN hub providing power over the Ethernet (PoE) in accordance with
IEEE 802.3at shall be a UL Listed device with the output evaluated as a
Limited Power Source as defined in UL60950-1 or PS2 as defined in UL62368-1.
Unit is intended for installation in a Network Environment 0 as defined in IEC
TR 62102.
As such, associated Ethernet wiring shall be limited to inside the building.
COMPONENT
As for each sales country, accessories are not the same.
INSTALLATION
-
Not Included: Micro SD Card
-
Directly installing on wall/ceiling
-
Not Included
-
When connecting the cable through the side
-
Installing using pipe
-
Installing network cable (PoE)
-
Not Included: Wi-Fi dongle, OTG adapter
PASSWORD SETTING
When you access the product for the first time, you must register the login password.
-
For a new password with 8 to 9 digits, you must use at least 3 of the following: uppercase/lowercase letters, numbers, and special characters. For a password with 10 to 15 digits, you must use at least 2 types of those mentioned.
– Special characters are allowed. :
~`!@#$%^&*()_-+={}[]|\;:‘“<>.,?/ -
Space is not allowed for passwords.
-
For higher security, you are not recommended to repeat the same characters or consecutive keyboard inputs for your passwords.
-
If you lost your password, you can press the [RESET] button to initialize the product. So, don’t lose your
password by using a memo pad or memorizing it.
LOGIN
Whenever you access the camera, the login window appears.
Enter the User ID and password to access the camera.
- Enter “admin” in the
input box. - Enter the password in the
input field. - Click [Sign in].
CONNECTING TO WIFI
Camera setting
- Connect OTG adapter (5-pin) and Wi-Fi dongle to the micro USB terminal.
Smartphone setting
-
Install the Wisenet Installation application.
-
Select the camera SSID after turning on the WiFi.
-
Run the Wisenet Installation application.
-
When you log in to the camera, the video will be connected.
` The video will be played without being logged in during the initial connection. -
You can adjust the angle of view while watching the video through a smartphone.
Covered by patents at
patentlist.accessadvance.com
Head Office
6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si,
Gyeonggi-do, 463-400 Rep. of KOREA
Tel : +82.70.7147.8753
Fax : +82.31.8018.3740
www.hanwha-security.com
Hanwha Techwin Europe
Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom
Tel : +44.1372.235663
Fax : +44.1932.57.8101
www.hanwha-security.eu
References
- Wisenet DDNS - New name of SamsungiPOLiS!
- ddns.hanwha-security.com/ID
- Hanwha Vision - Global Vision Solution Provider
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>