tp-link C425 Solar Powered Security Camera Kit User Guide
- July 2, 2024
- tp-link
Table of Contents
Quick Start Guide
Solar-Powered Security Camera Kit
C425 Solar Powered Security Camera Kit
Setup Video
Scan QR code or visit
https://www.tp-link.com/support/setup-video/#cloud-cameras
https://www.tp-link.com/support/setup-video/#cloud-cameras
7106511209 REV1.0.0
*Images may differ from your actual products.
Mount the Camera Kit After Setup
Note: Images
may differ from the actual products.
- Charge the Battery
Fully charge the battery before use. Fully Charge Time: 5.5 hours
*Check battery status in the Tapo app after setup.
2 Set Up
- Get the Tapo app from the App Store or Google Play.
https://www.tapo.com/app/download-app/ - Press and hold the power button on your camera for about 3 seconds to turn it on.
- Tap the button in the app and select your camera model. Follow app instructions to complete setup.
Safety Information
For Camera:
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- Do not use the device where wireless devices are not allowed.
- Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
- Adapter shall be easily accessible.
CAUTION!
Avoid replacement of a battery with an incorrect type that can defeat a
safeguard. Avoid disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a battery, that can result in an
explosion. Do not leave a battery in an extremely high temperature
surrounding environment that can result in an explosion or the leakage of
flammable liquid or gas; Do not leave a battery subjected to extremely low air
pressure that may result in an explosion or the leakage of flammable liquid or
gas.
For Solar Panel
- Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Avoid scratching and hitting the surface of the solar panel during use.
- Avoid contact with highly corrosive substances during use.
- The suitable temperature for Tapo A201 and accessories is -20°C~45°C. The working temperature range for battery charging should be maintained at 0°C~45°C.
- Make sure the USB connector is fully plugged into your Tapo device.
- Make sure you follow the user manual to install the solar panel correctly.
- Make sure the waterproof gasket and other accessories can protect the connectors on your Tapo device.
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper use
of the device. Please use this product with care and operate at your own risk
For Camera:
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at
https://www.tapo.com/support/ce/.
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Radio Equipment Regulations
2017.
The original UK Declaration of Conformity may be found at
https://www.tapo.com/support/ukca/.
For Solar Panel:
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tapo.com/support/ce/
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Electromagnetic
Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations
2016.
The original UK declaration of conformity may be found at
https://www.tapo.com/support/ukca/