VEVOR LSTK06 Power Inlet with Metal Box Installation Guide
- July 1, 2024
- VEVOR
Table of Contents
VEVOR LSTK06 Power Inlet with Metal Box
Specifications
- Model: LSTK06
- Description: 50A 125/250V AC
- NEMA: SS2-50P
Installation Instructions
Power Inlet assembled with metal box
-
Model: LSTK06
-
Desc: 50A 125/250V AC
-
NEMA: SS2-50P
-
WARNING: DANGER-RISK OF ELECTRIC SHOCK. DO NOT START THE GENERATOR UNTIL THE CORD IS CONNECTED TO THIS INLET AND THE GENERATOR.
Failure to comply with this instruction could result in an electrical failure, fire and electrocution. -
IMPORTANT: Installation of this power inlet box and related wiring must be done by a qualified electrician in compliance with all applicable electrical codes, ANY TERMINAL MAY BE ENERGIZED WHEN THE
CORD IS CONNECTED. SHUT DOWN THE GENERATOR BEFORE DISCONNECTING THE CORD FROM THIS INLET AND THE GENERATOR. FOR POWER INLET ONLY. NOT FOR USE AS AN OUTLET. -
NOT FOR INDOOR USE.
When used to power a structure, this inlet must be used in conjunction with a transfer switch to comply with the NEC and to avoid serious safety risks. -
Installing the Power Inlet Box：
Mount the power inlet box on the outside of the building in a convenient location, using the three holes provided in the back of the cabinet, Using copper wire only and approved wiring methods, run the wiring through one of the knockouts in the cabinet to a junction box located near the transfer switch, If using conduit, pull at least four colours. -
WireGauge: 6AWG~8AWG.Strip the wire insulation 3/5″(15mm, FIG1) (do not tin conductors) and connect the wires in the power outlet box as follows. Make sure there is no wire insulation in any terminal other outlet terminal screws are tightened to 35-inch-pounds torque using an Electric flat Screwdriver.
Cable Color Scheme
- Black/Red =Load (250 Vlot), the terminals marked “Black” and “Red”
- White =W-Neutral Conductor connected to “White”mark-ing terminal
- Green =Green power inlet wire to the green ground screw terminal on the inside of the cabinet. If required, green wire to the green ground screw terminal on the inside of the cabinet.(-FIG2)
Enter installation considerations
Choose one threading hole that suits you the best.
Technical Support and E-Warranty Certificate www.vevor.com/support
Power Inlet assembled with metal box
- We continue to be committed to providing you tools with at competitive prices.
- “Save Half”, “Half Price” or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and do not necessarily mean to cover all categories of tools offered by us.
- You are kindly reminded to verify carefully when you are placing an order with us if you are saving half in comparison with the top major brands.
Technical Support and E-Warranty Certificate www.vevor.com/support
FAQ
- Q: Where can I find technical support and an e-warranty certificate?
- A: You can visit www.vevor.com/support for technical support and e-warranty certificate assistance.
- Q: How do I know if I am saving half when purchasing tools from VEVOR?
- A: VEVOR’s savings claims are estimates compared to major brands. Verify carefully before placing an order to ensure actual savings.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>