eccomum ZCW-FSJ003 Multi Functional Baby Food Maker User Manual
- June 16, 2024
- eccomum
Table of Contents
eccomum ZCW-FSJ003 Multi Functional Baby Food Maker
Product Features
-
Safe Operation Function
When the product is powered on. if the lid of the stirring cup is not in proper contact with the safety switch or the stirring cup is open, the food processor will not work. -
Overheating Protection
If the water tank runs dry during steaming, the heater will shut off. Please add enough water to the water tank to resume operation. -
Security Hardened Blada
The blade has a fixed locking position to make the blade more secure and stable. -
Split Steam Basket Design
Food and soup are separated and the thickness of the food should be adjusted according to the baby’s needs. Equipped with a user-friendly handle, more easier and convenient to use. -
Screw Cap Type Stainless Steel Water Tank
Stainless steel liner, larger tank opening, more convenient to add water, easy to clean.
Composition
- A. Food Spatula
- B Water Tank Screw Cap
- C. Touch Screen Panel
- D. Main Engine
- E. Steaming Holes
- F. Motor Shaft
- G. Blender Cover
- H. Anti-overflow Cover
- I. Steaming Basket
- J. Blade Holder
- K. Sealing Ring
- J. Blade Holder
- M. Blade Drag
- L. Tritan Stirring Cup
How to Use
The steaming time is determined by cutting all the ingredients into a size of 1.5 cm.
Control Panel
POWER ON/OFF
- Plug in, the power button lights up in white, click the power button, a beep sound, the machine enters the standby state, and all displays show “_ “
- When any button in the panel is clicked, the button light will light and beep sound, indicating that the function is activated.
- When the machine is in the standby or working state, long-press the power button to cancel the current task.
Water Shortage Reminder
- If there is no water in the water tank or the water is dried during steaming, the heater will stop heating. After the temperature of the water tank drops, the machine will beep for 1 second and turn off.
Timer Display
- Display the set time of the steam function.
Timing Increase+ /Decrease
- In the steam function, you could manually increase or decrease the set time, click “+” to increase by 1 minute, and click “-” to decrease by 1 minute.
- Long press “+” or “-” to quickly increase or decrease the time (0-30 minutes cycle).
Defrost
- Click the defrost button, the 10-minute timer will be displayed automatically, and a beep will sound at the same time, and the indicator light will flash. At this time, you can press “+” “-” to manually adjust the defrost time. After completing the defrosting function, the machine emits 3 beeps.
Steaming Cooking
- Click the cooking button, and the 20-minute timer will be displayed automatically, and a beep will sound at the same time and the indicator light will flash. At this time, you can press “+” ” to manually adjust the working time. After completing the cooking function, the machine emits 3 beeps.
Sterilization
- Click the disinfection button, the 30-minute timer will be displayed automatically, and a beep will sound at the same time. The indicator light flashes. At this time, you can manually adjust the timer time by pressing “+ -*. After the disinfection function is completed, the machine emits 3 beeps.
Automatic Blender
- Click the automatic blender button, the indicator flashes and the automatic blender function starts, and the lights are displayed at the same time.
- The automatic blender procedure is: stirring 5 seconds—10 seconds —10 seconds —10 seconds—10 seconds—10 seconds—5 seconds—3 seconds, a total of 8 times, with an interval of 1 second each time. 3 beeps when completed.
Manual Blender
- Press and hold the manual button, the indicator light flashes, the manual stirring function starts and the indicator lights are displayed at the same time. The hand can be released and the blender motor will stop working.
- If you want to continue this operation, please keep pressing the manual stirring function.
Operation Process
eccomum baby food processor is 5 in 1 designed with steam cooking, defrosting, automatic blending, manual blender, and sterilization. Please refer to the operation method according to the ” Operation Process ” in this manual.
Steam Cooking
-
Before each use, please clean all parts except the main engine and check if the silicone steam outlet is blocked.
-
Open the water tank cover counterclockwise, add pure water to the water tank, and lock the water tank cover according to the direction. As shown in Figure 1, and Figure 2.
-
Before using this product, add water to the water tank (180ml of purified water is recommended) as shown in Figure 3 and Figure 4.
-
Then press the ” ” key to turn on the power and then press the “disinfection” key on the operation panel to sterilize the water tank and the stirring cup.
-
After the disinfection is completed, add water to the water tank again (recommended to add 180ml of purified water). The water addition capacity is determined by the hardness and toughness of the steamed food.
-
Pick up the Stirring Cup and unscrew the blender cover clockwise. As shown in Figure 5, and Figure 6.
-
Put the raw food materials to be steamed into the steam basket. Before putting solid materials into the steam basket. They should be cut into small
pieces (block size should not exceed 2 cm.)As shown in Figure 7. -
Put the steam basket containing the required steam-cooking food into the blender cup, then close the lid and turn it counterclockwise. (The “lock of the blender lid should aligned with the center of the handle) As shown in Figure 8 and Figure 9
-
Place the blender cup in the cup holder and turn it counterclockwise (the center of the blender handle is aligned with the mark on the cup base). As shown in Figure 1 O and Figure 11, after pressing the power button, press the cooking button. The default cooking time is 20 minutes. Gently press “+” “-” in the panel to adjust the cooking time
Note: -
Don’t process big solid food at once, big solid food should be divided into multiple pieces for processing.
-
If you often use water with more impurities for cooking, there may be a small amount of scale in the stainless steel liner in a water tank. Please don’t worry, you could pour the right amount of vinegar into the water tank, and soak it for 10-20 minutes, the scale can be removed easily
Automatic Blender & Manual Blender -
After the steaming is completed, remove the blender cup, unscrew the lid, pour the steamed food into the blender cup, cover the overflow prevention cap and the cup cap, put it into the cup holder, and turn it counterclockwise, Place the steam basket aside and clean it in time (add other ingredients as needed, such as purified water, milk, sugar ). As shown in Figure 12, and Figure 13.
-
Lightly press the Automatic Blender key on the control panel or you can long-press the Manual Blender key to stir. (The duration of eacl1 time of manual blender cannot exceed 15 second
-
After the baby food supplement is made, check the food with a spoon to ensure that there are no clots and foreign objects in the supplementary food. Pour it into a cup or bowl and cool it to eat.
Note:
- Add an appropriate amount of water according to different foods. Do not overfill the water tank. The amount of water added cannot exceed 180ml.
- It is recommended that you use pure water because the minerals contained in other types of water will cause scale accumulation in the water tank.
- Do not add anything other than water to the water tank.
- After eacl1 use, please discard the remaining water in the water tank.
- If there are large particles of fact, you need to stir for a long time and release it after the stirring is satisfactory
Defrost
- Open the water tank cover of the main engine counterclockwise, and add pure water to the water tank. and lock the water tank cover according to the mark. (It is recommended to add 180ml of purified water).
- Put the raw materials to be thawed into the steaming basket of the blender cup and then put the blender cup into the cup holder and turn it counterclockwise. (The center of the handle of the blender cup should aligned with the cup holder) As shown in Figure 14, Figure 15.
- After pressing the power button, then the Defrost” button, the frozen food defrost time is 10 minutes, lightly press”+”-” on the panel to adjust the thawing time
Sterilization
- After cleaning the blender cup, you can use the “sterilize” function key on the machine to steam sterilize the baby bottle, pacifier, spoon, molar stick and other items.
- Remove the blender cup from the food processor and put the items to be sterilized into the steam basket in the blender cup, screw on the lid, put it back on the main engine, and tighten it.
- After pressing the power button, press the disinfection button, the default disinfection time is 30 minutes, lightly press “+” “.w in the panel to adjust the disinfection time.
- Finally, turn off the main engine. plug out the power, drain the remaining water in the water tank, dry the water tank with a dry doth, and keep the water tank dry and clean.
Note
- The duration of cooking depends on the amount of water added to the water tank. The duration of 180ml of water is about 30 minutes.
- Never stir frozen food, because in this case, the product cannot heat the frozen food to the temperature required to cook the food. Therefore, before cooking food by using this product, it must be thawed. After that, drain the excess water from the defrosted food and steam it according to the normal cooking time.
- Do not put water or any other liquid into the mixing cup for cooking, as it may cause damage to the product.
- During the cooking process. high-temperature steam will be discharged from the mouth of the blender cup. Do not touch (especially do not let children touch it) high-temperature parts or steam to avoid scalding.
- Please test the temperature before feeding, and make sure that the baby food is evenly mixed.
Cleaning
- Turn off the power and remove the blender cup from the cup holder.
- Remove the lid of the blender cup.
- Remove the blade assembly from the blender jar. The installation and removal of the blender set are shown in Figure 18 and Figure 19.
- After each use, you should clean the blade assembly.
- After use, you can wash the parts in contact with food in hot water with detergent.
- If necessary, you can clean the main body of the machine with a dry cloth.
- Check if there are food particles in the water tank. If food particles enter, dean the water tank.
- Please keep the water tank in a dry state to prevent bacterial growth.
- You could also remove the blender cup, unscrew the cap and pour clean water to the MAX position (as shown in Figure 20), then put the anti-overflow cap and screw on the cup cap, and then put it bade: on the base to budtle it. Click the “Automatic Blender” function key, the machine will enter the automatic cleaning mode. Repeat this cleaning step 2-3 times, the machine can be deaned
Note
- The blade is very sharp, be careful of scratches.
- Do not leak seals, otherwise, water will leak.
- Clean the product immediately after each use.
- Never immerse the main engine in water.
- Never use bleaching or chemical solutions in this product.
- Never use steel wool, abrasive dealers, or corrosive liquids (such as gasoline, acetone or alcohol) to clean the product
Descaling
The scale should be removed for this product every week to ensure its best working efficiency. Using pure or filtered water in the product can help reduce the accumulation of scale. To remove food particles and scale from the water tank, follow the descaling instructions below.
- Add a small bag of citric acid (about 10 grams) to 200 ml of water and pour it into the water tank. Note: You could also use 150 ml of water and 50 ml of white vinegar(8% acetic acid) for descaling.
- Start the steaming button, the indicator light is on, indicating that the product is steaming.
- After steaming for 5-6 minutes, power off the product.
- Pour out the used acetic acid (or vinegar) aqueous solution from the water tank.
- Rinse the water tank and blender thoroughly several times with clean water.
- Before using this product to process food again, please fill 100-200 ml of water into the water tank without putting any food in the mixing cup, and let the product steam for 1O minutes in an empty cup to remove some residual odor.
Important safeguards
- Do not touch hot surfaces, please use handles.
- To protect against electric shock, do not immerse the cord, plug or appliance in water or any other liquid.
- Close supervision is necessary when any appliance is used near children
- Unplug from the outlet when not in use and cleaning. Allow to cool before inserting or removing parts.
- Do not operate any appliance with a damaged cord.
- The use of accessories not recommended by the appliance manufacturer may cause fire, electric shock or injury
- Use on a level surface and be sure there is no debris under the unit and the rubber pads are touching the surface
- Household use only, do not use outdoors.
- Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
- Do not place any part of this machine on or near hot gas or electric burner, or in a heated oven.
- Extreme caution is needed when moving an appliance containing hot liquids.
- Do not use the appliance for other than intended use.
- This appliance has to be used only with the voltage values given on the bottom the product.
- Make sure the machine is turned off before unplugging.
- If using the machine with an extension cord, make sure the cord is the proper electrical rating for the machine. The extension cord should be arranged so that is does not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.
- Before serving, make sure food is at a safe temperature
- Unplug the cord from the wall outlet before serving food made in the machine. Do not leave the cord within children’s reach.
- Avoid contact with moving parts, never remove the lid while the blade is moving.
- The blade has 4 cutting edges and is very sharp. Handle carefully, install, and remove by handling the top of the plastic column
- If it is found damaged power cord or other unusual situation, should be sent to a professional or factory repair, not to self-maintenance.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- The appliance is intended for use in the domestic/private environment only, not in commercial situations.
- Never use bleaching or chemical solutions in this product.
- Never use steel wool, abrasive cleaners, or corrosive liquids (such as gasoline, acetone, or alcohol) to clean the product.
Technical data
- Supply voltage : 120V-60HZ
- Powe: Heating-up: 300W, Blende: 120W
- Water Tank Capacity: 180ml
FISHING KING, SLU PIEDRABUENA,4,4B;MADRID, MADRID,28026 Spain
- Manufacturer Name: Foshan City Zhongchengwei Electrical Appliance Co., Ltd.
- Manufacturer Address: first floor No.106 Outer Loop Road, Shunde hi tch Zone(Ronggui), Hua Kou neighborhood Ronggui, Shunde District, Foshan City, Guangdong Province, China.