ANGELES HOME Rolling Lawn Spike Aerator with Fender for Garden Owner’s Manual
- June 30, 2024
- ANGELES HOME
Table of Contents
Rolling Lawn Spike Aerator with Fender for Garden
“`html
Specifications:
- 1x spike aerator
- 1x protective shield
- 1x lower handle section
- 1x middle handle section
- 1x upper handle section
- 2x 6x20mm bolt
- 2x washer
- 2x lock nut
Product Usage Instructions:
- Assembly:
1. Fit the protective shield over the bar on the top of the
spike aerator ensuring the clips on the protective shield hold it
in place.
2. Position the lower handle section over the protective shield
lining up the two sets of holes. Fix together using bolts, washers,
and nuts provided.
3. Attach the middle handle section and upper handle section
ensuring that the buttons pop out and secure into place.
Frequently Asked Questions (FAQ):
Q: Can I adjust the depth of the spikes on the aerator?
A: Yes, you can adjust the depth by changing the angle at which you hold and push the aerator.
Q: Is it recommended to use the spike aerator on wet or dry
soil?
A: It is generally recommended to use the spike aerator on slightly damp soil for best results.
Q: How do I clean and maintain the spike aerator?
A: After each use, clean off any dirt or debris from the spikes and store in a dry place to prevent rusting.
“`
Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
Before You Start
Please read all instructions carefully. Retain instructions for future
reference. Seperate and count all parts and hardware. Read through each step
carefully and follow the proper order. We recommend that, where possible, all
items are assembled near to the area in which they will be placed in use, to
avoid moving the product unnecessarily once assembled. Always place the
product on a flat, steady and stable surface. Keep all small parts and
packaging materials for this product away from babies and children as they
potentially pose a serious choking hazard.
2
PARTS 1x spike aerator 1x protective shield 1x lower handle section 1x middle
handle section 1x upper handle section 2x 6x20mm bolt 2x washer 2x lock nut
ASSEMBLY
1. Fit the protective shield over the bar on the top of the spike aerator
ensuring the clips on the protective shield hold it in place.
2. Position the lower handle section over the protective shield lining up the
two sets of holes. Fix together using bolts, washers and nuts provided.
3. Attach the middle handle section and upper handle section ensuring that
the buttons pop out and secure into place.
3
MAINTENANCE · Clean after use. · Store in a cool dry place, such as a garage
or
shed. · Periodically, check to ensure that all spikes are
firmly secured and tighten if necessary. · Periodically, lightly oil the axle.
4
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>