ANGELES HOME OPCK6-70299BL Blue Outdoor Pop up Canopy Tent Instruction Manual
- June 4, 2024
- ANGELES HOME
Table of Contents
OPCK6-70299BL Blue Outdoor Pop up Canopy Tent
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
**** Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
Replacement
Part | Description |
---|---|
A | Peak Cap |
B | Ceiling Assembly |
C | Top Cap |
D | Eave Assembly |
E | Leg Assembly |
F | Leg Assembly |
G | Wheeled Storage Bag |
H | Fabric Top |
I | Stake |
J | Guy Rope |
IMPORTANT: Carefully read and follow the instructions provided with this
product.
WARNING: Keep all flame and heat sources away from this canopy top and
sidewall fabric. This canopy top and sidewall are made with flame-resistant
fabric which meets CPAI-84 specifications. It is NOT FIRE PROOF. The fabric
will burn if left in continuous contact with any flame source. The application
of any foreign substance to this fabric may render the flame-resistant
properties ineffective.
WARNING: Do not set-up or leave the canopy unattended in the following
conditions: gusty wind, rain, hail, sleet, snow, drizzle, or any other harsh
weather conditions. Doing so may cause damage to the entire canopy and will
void the warranty.
Set Up The Canopy
-
Stand on the opposite side of your partner and lift the frame off of the ground while walking backward away from your partner.
-
Unfold the canopy top and place the top over the opened frame. Secure the canopy top to the corners of the canopy frame using Velcro connections.
-
Lift up the slider at each comer of the canopy frame until it clicks into the spring button. Finish attaching the large canopy inside the canopy frame using the Velcro loops.
-
Pull the red part on each leg, raise or lower to adjust the canopy height. And press the red part when the adjustment is finished.
-
Insert a stake into the foot of each canopy leg. Measure out each leg to a proper distance and secure four stakes to the ground. Attach the ropes to the canopy top and tie the attached ropes to the stakes in the ground. Ensure the ropes have the proper tension by adjusting the plastic adjusters on the ropes.
Take Down The Canopy
Pull up all stakes from the ground.
Press the red button on each leg and retract the legs to their original
height. And press back the red part to the position.
Press the red button at each comer of the canopy, and pull down the slider
until the spring button appears.
Lift one leg of the frame until the two neighboring legs are raised off the
ground. Push inward until the frame is fully closed. With the canopy feet
facing the rollers, slide the wheeled storage bag over the closed canopy
frame. Close the zipper on the wheeled storage bag.