ANGELES HOME MW1MRL7236 72 in. x 36 in. Rectangular Frameless Wall Mount Installation Guide
- June 3, 2024
- ANGELES HOME
Table of Contents
- ANGELES HOME MW1MRL7236 72 in. x 36 in. Rectangular Frameless Wall Mount
- IMPORTANT SAFETY INSTRUCTIONS
- GROUNDING INSTRUCTIONS
- PARTS INCLUDED
- ELECTRIC CONNECTIONS
- MIRROR FEATURES
- INSTALLATION INSTRUCTIONS
- FINAL ASSEMBLY
- OPERATION
- Use and Maintenance
- LIMITED WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ANGELES HOME MW1MRL7236 72 in. x 36 in. Rectangular Frameless Wall Mount
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always be followed,Requires two(2) person in installation.
DANGER
READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS MIRROR.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons. Use
this furnishing only for its intended use as described in these instructions.
Do not use attachments not recommended by the manufacturer. Never drop or
insert any object into any opening. Do not use outdoors.
Risk of electric shock. Connect this furnishing to a properly grounded circuit
only. See Grounding instructions.
GROUNDING INSTRUCTIONS
This product must be connected to a grounded metal, permanent wiring system,
or an equipment-grounding conductor must be run with the circuit conductors
and connected to the equipment-grounding terminal or lead on the product.
An Electrical option cabinet must be wired to a 20 Amp GFI (Ground Fault
Interrupter) protected circuit when used in bathrooms and all other locations
required by the National Electric Code.
NOTE: To ensure the normal use of product, it is required to set out
wires as per the regulations of IEE. The product is only applicate to the
indoor installation. The installation must be executed by a professional
electrician, wrong installation may lead to product damage and personal
injury.
PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
TOOLS REQUIRED FOR ASSEMBLY
PARTS INCLUDED
NOTE : Determine overall mirror dimensions before proceeding to installation. All dimensions & specifications are approximate and subject to change without notice . Accessories and parts may vary from the picture above.Depends on the product model and size.
ELECTRIC CONNECTIONS
ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN
- WARNING: Shut off power before wiring the mirror.
- WARNING: An Electrical option mirror must be wired to a 20 Amp GFI (Ground Fault Interrupter) protected circuit when used in bathrooms and all other locations required by the National Electric Code.
- WARNING : This mirror must be connected to a grounded, metal permanent wiring system or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the mirror.
- CAUTION : Requires 120 VAC 20 Amp GFI protected circuit.
Electric wiring : Be sure to provide enough wire to make the proper and safe connection to the Field/Power.
MIRROR FEATURES
- 5mm copper free silver mirror
- High output LED lighting:
- CRI 90+, 3000-6000K CCT, IP44
- Color Temperature changing touch switch for surface LED
- Vertical and horizontal mount options
- Defogger
INSTALLATION INSTRUCTIONS
PLACEMENT
Select the desired position of the mirror. Level and mark the location.
(vertical and horizontal mounting opntions)
SUPPORT LOCATION
Measure the hanging bar holes and mark the drilling locations ensure marking
are leveled.
INSTALL SCREWS
Using a drill, make holes on solid wall,and fill with supplied plugs and
screws into hanging bar holes tightly.
POWER OFF
Please turn off all the power before the mirror wires connect.
CONNECTION
Use the wire connector connect to extemal power supply, and pusing the power
supply wires into the junction box.
Warning : Strip wires to a suitable length.DO NOT connect the hardwire to
a plug & socket outlet
Turn on the power
Hang up the mirror stable then turn on the power.
FINAL ASSEMBLY
How to use Defogger Switch and Dimmer Switch:
Left touch Senor
oN/OFF Anti-fog(The defogger power will automatically turn off after an hour)
Right Touch Sensor
ON/OFF Lighting Quick Tap-tap(two times) light color change, brightness
control by holding
OPERATION
- Touch the sensor button to turn ON the light. Quick tap-tap twice to change the light temperature from 30001<, 4000K to 6000K.
- Touch and hold the Light ON sensor button to dim the light. Release the button when the light reaches the desired brightness setting.
- Touch the sensor button to turn OFF the light.
The mirrors are equipped with a memory feature to preserve the previous brightness setting.
Suggestion : Turn off the mirror power supply if you don’t use it for a long time.
WARNINGS:
- Please do not use it if you found the mirror have been broken.
- Never put any sharp or heavy material on the mirror surface, otherwise, the glass mirror will be broken and body injury accidents may occur.
- Turn off the power switch in storm lightning weather to avoid electric parts damage.
Use and Maintenance
CAUTION:
USE
To avoid damage, do NOT knock the mirror with any hard objects
CLEANING
Do NOT clean the mirror with caustic cleaner. Do NOT wipe the mirror with
Bristle brush
MAINTENANCE
For daily maintenance, please use soft cloth and mild cleaner to clean the
mirror
LIMITED WARRANTY
Angeles Home warrants to the original purchaser that, it will, at its election repair, replace, or make the appropriate adjustments to products made by this company shown to have significant defects in material or workmanship which are reported to Angeles Home in writing within two (2)years from the date of delivery. Angeles Home is not responsible for installation costs. The warranty is void in the event the product is damaged in transit, or if damage or failure is caused by abuse, misuse, abnormal usage, faulty installation, damage in an accident, improper maintenance,or any repairs other than those authorized by Angeles Home.At the expiration of the two years warranty period, Angeles Home shall be under no further obligation under any warranty, expressed or implied, including the implied warranty of merchantability. Angeles Home shall not be liable for any consequential damages arising out of or in connection with the use or performance of its products. Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Any liability against Angeles Home under any implied warranty, including the warranty of merchantability, is expressly limited to the terms of this warranty. Permission to return any merchandise under this warranty must be authorized by Angeles Home and returned prepaid by the purchaser. Claims under this warranty should be sent directly to your dealer.
For customer support please call 206.809.0093 weekdays 9:00 to 6:00 PST, or by email: service@angeleshome.com