D-Link DIR-612 Wireless N300 Router User Guide

: June 29, 2024
: D-Link

DIR-612 Wireless N300 Router

“`html

Product Information:

Specifications:

Model: DIR-612
Power Supply: 5V 1A
Connection Type: PPPoE

Product Usage Instructions:

Step 1: Connect Devices

Connect the ONT to the router’s WAN port using a LAN cable.

Step 2: Connect to Router

Connect to the router via WIFI or LAN cable. WIFI name and
password are on the bottom label. Use the provided LAN cable if
needed.

Step 3: Access Router Settings

Open a Web Browser and go to http://10.0.0.2/

Step 4: Start Setup

Press the START button.

Step 5: Language Selection

Select “English? YES.”

Step 6: Setup Options

Choose “Continue” for quick setup. Avoid skipping setup for
initial configuration.

Step 7: Connection Settings

Select Wired connection as the connection method and Router as
the work mode.

Step 8: PPPoE Configuration

Enter the Access username and password provided by your ISP.
Press scan if unsure about connection type.

Step 9: Network Configuration

Change Network (WIFI) name or Password if desired. Click next if
no changes needed.

Step 10 & 11: Proceed to Next Steps

Skip these steps by clicking next.

Step 12: Admin Password

Set a secure password for Admin login (not ‘admin’).

Step 13: Finalize Setup

Review settings, apply changes, and reconnect to WIFI if needed.
The router will test internet connection. Setup complete.

Frequently Asked Questions (FAQ):

Q: What power supply should I use for the DIR-612?

A: It is recommended to use a 5V 1A power supply. Do not use a
12V power supply.

Q: How can I find the WIFI name and password for the

router?

A: The WIFI name and password can be found on the bottom label
of the router.

Q: Can I change the WIFI name and password during setup?

A: Yes, you can change the Network name (WIFI name) and Password
during setup if desired.

“`

DIR-612
This guide will show how to setup the router using PPPoE fibre connection. IMPORTANT NOTE Do not use a 12V power supply. The recommended power supply is a 5V 1A
Step 1
Connect the ONT via LAN cable to the router on its WAN port.
Step 2
Connect to the router via WIFI or LAN cable. The WIFI name and password can be found on the bottom label of the router. There is also a LAN cable provided in the packaging.
Step 3
Open a Web Browser and go to http://10.0.0.2/
Step 4
Press the “START” button.

Step 5
“English?” YES.
Step 6
We press “Continue” to proceed with the quick setup. “Advanced Settings” takes you straight to the routers Main Interface and settings, skipping the quick setup. We do not want to skip the setup
Step 7
Connection method: Wired connection Work mode: Router

Step 8
The connection type is PPPoE.
Note: You can press the scan button to auto detect if the user should be using DHCP or PPPoE for their Fibre setup.
Enter the Access username and password given to the user from Telkom. Example shown below.
Do not change any other settings on the page.

Step 9
The end user can change the Network name which means the WIFI name. The end user can change the Password for the WIFI. If they do not want to change any details they can simply click next.
Step 10
You do not need to do anything on this step other than going next.

Step 11
You do not need to do anything on this step other than going next.
Step 12
Here the user must set a password for Admin login. The password cannot be admin.

Step 13
This will be the summary of the quick setup. Users can review all the settings, take pictures and double check if they want the shown settings. Click on apply.
The router will load the settings and after the user will need to reconnect to the WIFI if they changed any details. The router will test the internet connection. Setup complete.