aranet PRO Plus LTE Base Station User Guide

aranet PRO Plus LTE Base Station

Specifications

• Model: Aranet PRO Plus base station
• Manufactured in: Latvia, EU
• WiFi SSID: Aranet-C20a47
• WiFi IP: 192.168.206.100
• ETH IP: 192.168.205.100
• ETH MAC: C493003034E4
• Username: root
• Password: FhTdwPN7fg
• IEEE 802.3af PoE

Base Station Features

• Enclosures: You’ll find Aranet PRO Plus case.
• SIM Card Holder: Insert your SIM card here.
• Sensor Data Light: Flashes amber when receiving sensor data.
• Cellular Connection Light: Indicates cellular network status.
• Wi-Fi Light: Yellow light signals Wi-Fi status.
• Ethernet Light: Indicates network connection.
• System Light: Green light means the system is operational.
• Power Light: Green light indicates power.
• Mounting: Four holes for mounting screws.
• Warranty Seals: Nylon screws for warranty protection.
• Humidity Membrane: Ensures proper device functionality in different environments.
• Network Reset Button: Press and hold for at least 5 seconds to reset network settings and password.
• Ethernet Port: For network and power connection.

What`s in the box?

Aranet Base station
Ethernet cable

Essential for successful installation

To power up the base station, you’ll need either a Power over Ethernet (PoE) injector or a device that supports PoE. You can order a PoE injector from the Aranet shop.

Base station features

1. Screws: You’ll find screws to open and close the Aranet PRO Plus case.
2. SIM card holder: This is where you put your SIM card.
3. Sensor Data Light: Flashes amber whenever it gets information from a sensor.
4. Cellular Connection Light: Flashes orange slowly if there’s no SIM card or no connection. Flashes quickly with pauses when connected to the cellular network.
5. Wi-Fi Light: Yellow light means the Wi-Fi is on and the device is connected, or it’s in Access Point mode.
6. Ethernet Light: A yellow light indicates the Aranet PRO Plus is hooked up to your network with a cable.
7. System Light: Green means the system is up and running.
8. Power Light: Green means the device has power.
9. Mounting: The case has four holes for screws (4 to 4.5mm) so you can mount it on a smooth surface.
10. Warranty Seals: These are nylon screws.
11. Humidity Membrane: This part helps the device work properly in different environments.
12. Network Reset Button: Press and hold for at least 5 seconds to reset the network settings and the “root” user password.
13. Ethernet port: Network and Power connection.

Base station setup

1. Step 1
   Unscrew the plastic cover for the ethernet port.

2. Step 2
   Disassemble all the plastic parts.

3. Step 3
   Push out the water seal from the plastic cover.

4. Step 4
   Apply plastic nut, water seal, and plastic cover to the ethernet cable as shown in the picture.
   

5. Step 5
   Connect an ethernet cable to the base station.

6. Step 6
   Push all parts together and screw them securely

7. Step 7
   Use your Power over Ethernet (PoE) to power the base station. For the PoE injector provided by Aranet, use the “out” port.

8. Step 8
   Wait for the Wi-Fi light to turn on.
   

9. Step 9
   Please find the base station name and login credentials on the sticker located at the base station.

10. Step 10
    Find and connect to the Aranet local Wi-Fi access point from your phone, tablet, or computer.

11. Step 11
    After connecting, access the Aranet user interface at http://192.168.206.100
    

12. Step 12
    Login to the base station using credentials.

FOR MORE DETAILED INFORMATION ABOUT ARANET PRODUCTS, PLEASE VISIT ARANET.COM CONTACT YOUR ARANET REPRESENTATIVE, OR WRITE TO
INFO@ARANET.COM  PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. © SAF TEHNIKA, JSC. ALL RIGHTS RESERVED.
V3.0

References

• Aranet
• Aranet

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>