aranet TDSPC003.001 4 Anti-Theft Wall Mount User Guide
- June 6, 2024
- Aranet
Table of Contents
Anti-Theft
Wall mount
-
Components: screw, screwdriver, wall mount, wall plug
-
Put the wall mount in the mounting hole on the backside of the Aranet4 sensor
-
Push the wall mount upwards in a locked position
-
Put the screw into the wall mount
-
Drill a hole in the wall in the desired location. Drill diameter: 6mm
-
Push wall plug into the hole
-
Screw Aranet4 to the wall. Use a screwdriver with a security Torx T15 bit.
-
-
Aranet4 is mounted to the wall and ready to measure indoor air quality!
aranet4.com Copyright © 2021 SAF Tehnika, JSC. All rights reserve
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>