Tuya AH-238R Wireless Doorbell Instruction Manual
- June 28, 2024
- Tuya
Table of Contents
AH-238R Wireless Doorbell
“`html
Specifications:
-
Dimensions: 106 x 85 cm
-
Power Source: Built-in battery for transmitter, receiver
plugged into indoor outlet -
Remote Control/Receiving Distance: 200m
-
Ringtone Options: 38 chords with 4 level volume adjustment and
mute function
Product Usage Instructions:
Installation:
-
Take out the transmitter to be installed.
-
Recommended to clean the installation surface.
-
Tear off the protective film from both sides of the
double-sided tape. -
Position the transmitter on the wall and press firmly for about
10 seconds to secure it.
Operation:
- Unplug the insulator from the transmitter to power it on.
- Plug the receiver into an indoor outlet.
- To pair the transmitter and receiver, press and hold the
receiver volume button, then press the transmitter button twice
simultaneously to complete pairing.
Maintenance:
Keep the doorbell clean by wiping it with a dry cloth. Ensure
the area is dry before pressing the doorbell.
FAQ:
Q: What is the warranty for the product?
A: The product can be repaired within two years from the date of
sale. Damage caused by improper use, accidental damage, or
self-opening for maintenance is not covered by the warranty.
Q: What is the FCC Compliance Statement?
A: The device complies with part 15 of the FCC Rules and must
not cause harmful interference. It has been tested to meet Class B
digital device standards for residential installations.
Q: How do I pair the transmitter and receiver?
A: Press and hold the receiver volume button, then press the
transmitter button twice simultaneously to quickly produce a bell
ring, indicating successful pairing.
“`
106X85CM
Product installation diagram
key
Double-sided tape mounting
Need to press the button, the blue light above is flashing
Push button
Install button and tear both sides Glue holds the bottom shell to the wall
1.Battery is built in, just unplug the transmitter insulator The transmitter is powered on normally.
2. Plug the receiver into an indoor outlet.
Methods: Double-sided adhesive method
1.Take out transmitter 2.Recommended to 3.Tear the other piece 4. After fixing the
to be installed.
install on the wall or of double-sided tape. position on the wall,
Wipe the door clean
press it with your hand
and keep dry.
About 10 seconds hold firm.
04
Matters needing Attention
1.Open the package, first test the specific installation position, and
consider using double-sided tape to fix the launch.
2.Metal objects such as iron doors and iron frames will affect the effective
transmission distance and avoid such locations as transmitters. 3.Receiver as
far as possible away from induction cooker, TV, horn and other magnetic field
or signal interference sources. 4.Non-professionals should not open the repair
without authorization, so as not to destroy the precision electronic
components. 5.Avoid prolonged sun exposure and installation in metal
positions. 6.The correct use of this product can effectively extend the
service life.
Product Warranty
A.This product can be repaired within two years from the date of sale.
B.Damage caused by improper use, accidental damage or self-opening for
maintenance Not covered by warranty.
Q08
05
FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.Consult the dealer or an experienced
radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the
part responsible for compliance could void the user ‘s authority to operate
the equipment.
FCC Radiation Exposure Statement The device has been evaluated to meet general
RF exposure requirement. The device can be used in portable exposure condition
without restriction.
Wireless Doorbell
Operation Manual
Thank you for choosing our products
In order to use this product better, please read the product manual carefully
before installation, and install and use it correctly according to the manual.
Product Overview
Thank you for choosing our wireless doorbell. It is easy to install, no wiring
required,Simply plug the receiver into a power outlet and install the doorbell
transmitter where needed,Can easily implement the doorbell function. The
frequency of the company’s wireless doorbell is in line with the national
regulations, and will not produce harmful electromagnetic interference.
Product Characteristics
European and American modern simple, elegant and exquisite, comfortable and
practical style. Transmitter use advantage “alkaline batter y” to avoid the
use of short battery life; 200 m remote control/receiving distance;
38 chords ringtone choice, 4 level volume adjustment (with mute function);
Mode of Use
.When the company’s supporting products are shipped, the production workshop
has been matched directly Power on, no need to re-pair. Augmented emitter
method: After the product transmitter and receiver are powered on, press the
receiver volume button “? ” Do not let go, and press launch twice at the same
time, will quickly produce a bell ring, then the pairing is successful.
01
Product Specification
Ambient Temperature
Receiver
90V~260V
-20~60°C
key 12V -20~60°C
Operating Frequency
Volume
Power dissipation
1045825mm 70g
IP44 824622mm
40g
Product Function
Home doorbell caller;
As a contact, paging, patient care and other special purposes;
Ordinary business office access control call function;
Applicable Occasion
Home residence, office building, hotel service, hospital, factory site,Shops
and environments suitable for effective distance.
02
104mm
104mm
Product size Drawing
Volume button
Blue light flashing
82mm
Ringtone select key Blue light flashing
58mm
Push button 46mm
Volume button
Blue light flashing Ringtone select key
58mm 03
82mm
Blue light flashing
Push button 46mm