NITECORE NW5000 3 in 1 Power Bank Wireless Charger User Manual
- June 29, 2024
- Nitecore
Table of Contents
NITECORE NW5000 3 in 1 Power Bank Wireless Charger User Manual
Thanks for choosing Us!
This s a wireless charger for smart phone/iWatch /Airproofs, lows you enjoy
the fun of digital products easily.
Please read this manual carefully before using the product, ‘and keep properly
for checking.
Standard Accessories
3 in 1 power bank wireless charger 1
user manual 1
type-c Line*
Specification
| Name: | 3 in 1 Power Bank |
|---|---|
| Capacity: | 5000mAh/3.85V 19.25Wh |
| Lightning Input: | 5V-2A |
| Type-C Input: | 5V 3A 9V-2A 12V-1.67A |
| Type-C Output: | 5V-3A 9V-2A 12V-1.67A |
| Wireless charger: | ①15W(max) 23.5W(max) |
| Weight: | 145g |
| Dimensions: | 6810416mm |
Led
- Press the button and all indicator lights will light up.
- Put on your phone or watch, the green light is always on, And the four blue battery indicator lights also light up.
- The battery indicator light is less than 25% The indicator light flashes.
- Over current, over voltage, over discharge, Short circuit protection
Usage method
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment of and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>