D-Link DAP-X3060 Nuclias Connect Access Point Installation Guide
- June 28, 2024
- D-Link
Table of Contents
DAP-X3060 Nuclias Connect Access Point
“`html
Specifications:
- Model: Nuclias Connect AX3000 Access Point DAP-X3060
- Power Input: 802.3at PoE Switch or 802.3at PoE Injector
- Interface Connectors: Reset, Console RJ45, LAN(PoE), Power
Product Usage Instructions:
Hardware Overview:
The DAP-X3060 package includes LED indicators for power/status
and interface connectors for reset, console, LAN(PoE), and
power.
Installation:
The DAP-X3060 can be powered using Power over Ethernet (PoE) by
connecting it to a PoE power source device like an 802.3at PoE
switch or injector.
Manual Configuration:
Before mounting the device, manually configure it by connecting
it to the management computer using an Ethernet cable and accessing
the web user interface through dapx3060.local.
Using Nuclias Connect:
The DAP-X3060 is designed to be managed through Nuclias Connect.
Refer to the Nuclias Connect Manual for detailed configuration
instructions.
FAQ:
Q: What should I do if any of the package contents are damaged
or missing?
A: Please contact your local D-Link reseller for assistance.
Q: What is the default login information for the administration
user interface?
A: Username: admin, Password: admin
“`
Quick Installation Guide
Nuclias Connect AX3000 Access Point DAP-X3060
Additional documentation is also available on the D-Link website
Contents
English
1
ENGLISH
Before You Begin
System Requirements
This installation guide provides instructions for installing the DAP-X3060 on
your network. Additional documentation is also available on the D-Link support
website.
· Nuclias Connect Manual: For additional information and instructions on how
to configure the device using Nuclias Connect.
· DAP-X3060 User Manual: For additional information and instructions on how to
configure the device using the web user interface.
· Computers with Windows®, Macintosh®, or Linux-based operating systems with
an installed Ethernet Adapter
· Internet Explorer 11, Safari 7, Firefox 28, or Google Chrome 33 and above
(for configuration)
Hardware Overview
LED Indicators
Package Contents
This DAP-X3060 package includes the following items:
· DAP-X3060 Access Point · Power Adapter (Optional) · Mounting Plate and
Hardware · Quick Start Guide
If any of the above items are damaged or missing, please contact your local
D-Link reseller.
Note: Using a power supply with a different voltage than the one recommended
for the device will cause damage and void the warranty for this product.
Note: No power adapter is supplied with this product. To power the unit, use
an 802.3at PoE Switch or an 802.3at PoE Injector.
1
Figure 1: Front Panel LED
LED
Description
Green (Solid) – Device operational
1
Power/ Status
Red (Flashing) – Device booting up/Device malfunctioned Red (Solid) – Device boot up
has failed
Table 1: LED Description
DAP-X3060 Quick Installation Guide
1
ENGLISH
Interface Connectors
Using a Power Adapter (Optional)
1. Connect the power connector of the adapter to the power input on the
DAP-X3060 and plug the adapter into a nearby power outlet.
Configuration
Using Nuclias Connect
12 3 4
Figure 2: Rear Connectors
Connector
Description
1
Reset
Press and hold for 10 seconds to factory reset the device.
2
Console RJ45 console port for debugging. Port
3
LAN(PoE) Gigabit RJ-45 port for data and Port Power over Ethernet (PoE) power.
Input for the power adapter,
however the device can be
4
Power powered over Ethernet. Input Note: An 802.3at PoE injector is not
included in the package contents,
but can be purchased separately.
Table 2: Interface Description
Installation
The DAP-X3060 can be powered using one of the following two methods:
Using Power over Ethernet (PoE)
1. Use a standard Ethernet cable to connect the LAN port on the DAP-X3060 to
a PoE power source device such as an 802.3at PoE switch or 802.3at PoE
injector.
The DAP-X3060 is designed to be managed through Nuclias Connect. Refer to the
Nuclias Connect Manual for detailed configuration instructions.
Manual Configuration
Note: D-Link recommends manually configuring the device before mounting it.
The management computer, DHCP server and DAP-X3060 must be in the same subnet.
Use one of the following methods to access the web user interface:
Connecting through Ethernet
1. Use an Ethernet cable to connect the DAP-X3060 to the management computer,
or to the switch or router the management computer is connected to.
2. Manage the access point from a computer. Enter dapx3060.local in the
address field of your browser.
3. Log in to the administration user interface. The default login information
is
Username: admin Password: admin
2
DAP-X3060 Quick Installation Guide
ENGLISH
Connecting Wirelessly
1. Connect the management computer to the default SSID of the DAP-X3060,
“dlink”.
2. Manage the access point from a computer. Enter dapx3060.local in the
address field of your browser.
3. Log in to the administration user interface. The default login information
is
Username: admin Password: admin
Mounting
Figure 4: Mounting the Device
Mounting on a Solid Wall or Ceiling 5. Rotate the DAP-X3060 into the grooves
on the mounting plate to secure it to the plate.
Mounting with Ceiling Brackets
Figure 3: Attaching the Mounting Plate
1. Use the mounting plate to mark the location where to drill the holes in
the wall or ceiling.
2. Drill holes on the markings and place the included anchors into the
drilled holes.
3. Align and place the mounting plate on top of the anchors and use the
included screws (4×25.4 mm) to secure the mounting plate to the surface.
4. Plug the Ethernet cable into the LAN (PoE) port of the device. Note: If
you are powering the device with a power adapter, plug the adapter into the
Power Input port.
DAP-X3060 Quick Installation Guide
3
ENGLISH
Figure 5: Attaching the Ceiling Brackets 1. Clip the two ceiling brackets onto
a ceiling
crossbar.
Figure 6: Attaching the Mounting Plate 2. Use the included screws (2T38 mm)
to
secure the mounting plate to the ceiling brackets. 3. Plug the Ethernet cable
into the LAN (PoE) port of the device. Note: If you are powering the device
with a power adapter, plug the adapter into the Power Input port.
FCC:
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20 cm between the
radiator & your body.
NCC:
Figure 7: Mounting the Device
4. Rotate the DAP-X3060 into the grooves on the mounting plate to secure it
to the plate.
4
DAP-X3060 Quick Installation Guide
Appendix – Statements
ErP Power Usage
This device is an Energy Related Product (ErP) that automatically switches to
a power-saving Network Standby mode within 1 minute of no packets being
transmitted. It can also be turned off through a power switch to save energy
when it is not needed. Network Standby: 6.6000 watts
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
– Reorient or relocate the receiving antenna. – Increase the separation
between the equipment and receiver. – Connect the equipment into an outlet on
a circuit different from that to which the receiver is
connected. – Consult the dealer or an experienced radio/TV technician for
help.
Non-modifications Statement:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter except in accordance with
FCC multi-transmitter product procedures. For product available in the
USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible.
Note
The country code selection is for non-USA models only and is not available to
all USA models. Per FCC regulations, all WiFi product marketed in the USA must
be fixed to USA operational channels only.
RF Frequency Requirements
This device is for indoor use only when using all channels in the 5.15 to 5.25
GHz frequency range. High power radars are allocated as primary users of the
5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause
interference with and/or damage this device. This device will not operate on
channels which overlap the 5600-5650 MHz band. It is restricted to indoor
environments only.
IMPORTANT NOTICE:
Innovation, Science and Economic Development Canada (ISED) Statement:
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada.
Innovation, Science and Economic Development Canada (ISED) Statement:
This device complies with ISED licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’ISED applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
(i) the device for operation in the band 5150-5250 MHz is only for indoor use
to reduce the potential for harmful interference to co-channel mobile
satellite systems; (i) les dispositifs fonctionnant dans la bande 5150-5250
MHz sont réservés uniquement pour une utilisation à l’intérieur afin de
réduire les risques de brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux; Operations in the 5.25-5.35 GHz band are
restricted to indoor usage only. Les opérations dans la bande de 5.25-5.35 GHz
sont limités à un usage intérieur seulement.
Radiation Exposure Statement
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0.2 m between the radiator and your body.
Déclaration d’exposition aux radiations
Cet équipement est conforme aux limites d’exposition aux rayonnements ISED
établies pour un environnement non contrôlé. Cet équipement doit être installé
et utilisé avec un minimum de 0.2 m de distance entre la source de rayonnement
et votre corps.
Japan Voluntary Control Council for Interference Statement
B
Japan Voluntary Control Council for Interference Statement
This is a Class B product based on the standard of the VCCI Council. If this
is used near a radio or television receiver in a domestic environment, it may
cause radio interference. Install and use the equipment according to the
instruction manual.
5GHz
Product and Warranty Information
To find out more about D-Link Nuclias product or marketing information, please visit the website http://www.dlink.com or https://www.nuclias.com.
The D-Link Limited Lifetime Warranty information is available at http://www.dlink.com/warranty
VCCI-B
TECHNICAL SUPPORT
dlink.com/support
Notes
Notes
Ver. 1.01(WW) 2023/11/30
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>