HERO S11167 Medical Standard Seat Walker User Manual

: June 28, 2024
: Hero

Table of Contents

HERO S11167 Medical Standard Seat Walker User Manual
Specifications
Product Usage Instructions
Safety & Precautions
Features
Specifications
Product Assembly
Folding the Seat Walker
Using the Brakes
Sitting on the Seat Walker
Labelling Information
Product Care & Maintenance
Recycle & Disposal
Warranty
Frequently Asked Questions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HERO S11167 Medical Standard Seat Walker User Manual

Specifications

Name: Standard 6 (S11167 Burgundy, S11168 Blue, S11169 Purple) / Standard 8 (S11172 Burgundy, S11173 Blue)
Frame material: Aluminium
Frame weight: 5kg / 5kg
Product weight: 6.7kg / 8.4kg
Overall height (floor to handles): 82cm – 94cm / 82cm – 97cm
Seat height (seat to floor): 55cm / 56cm
Seating width: 44cm
Outer width (including back castors): 56.5cm / 58cm
Front Castors: 6 inches / 8 inches
Rear Castors: 6 inches / 8 inches
Safe workload (SWL): 140kg

Product Usage Instructions

Safety & Precautions

Before using the Hero Medical Standard Seat Walker, ensure the weight capacity of 140kg is not exceeded. Complete safety checks before each use to prevent malfunctions and injuries.

Exposure to Weather

Avoid exposing the seat walker to extreme temperatures to prevent damage. Operate the walker on even surfaces to avoid tipping over.

Intended Use

The seat walker is meant for walking aid purposes. Apply brakes before sitting on it and ensure it is on even ground. An attendant pushing an occupant is dangerous.Safety & Precautions 2

Safety & Precautions

Weight Capacity

The maximum safety weight limit for the seated walker is 140kg and must not be exceeded. If the maximum safety weight limit is exceeded, this can increase the risk of damage to the seat walker and/or risk of serious injury to the user and others.

User Safety

To ensure user safety, it is highly recommended that the below safety checks are completed prior to each use of the seat walker:

The brakes are functional.
Castors do not show signs of wear and tear.
The backrest, seat, hand grip, storage bag, and other removable parts are properly attached to the seat walker.
Ensure the backrest is securely locked into position before use – make sure pushbuttons are firmly protruding before leaning against the backrest.

Note: Failure to complete the above safety checks may result in seat walker malfunction and has the potential to cause injury to the user and others.
Exposure to Weather
Avoid exposure to hot or cold temperatures for extended periods, as it can cause parts of the seated walker to become very hot or cold. This can result in an increased risk of damage to the seat walker and/or risk of injury to the user and others.
Uneven Terrain
Operating the seat walker on uneven terrain increases the risk of the seat walker tipping over. Only operate on even and solid surfaces.
Intended Use
The seat walker is designed to be used as a walking aid. Before sitting on the seat walker, please apply brakes and ensure it is on even ground. Breakages and injuries may occur as a result of an attendant pushing an occupant on a seat walker is extremely dangerous.

Features

Lightweight aluminium frame
Folds easily for transportation and compact storage Swivel front wheels for easy maneuvering.
Height adjustable handles
Foldable padded backrest

Specifications

Product Assembly

Unboxing the seat walker
- Comes with two main components, the frame and the backrest bar
- Place seat walker into standing position by pressing down on centre aluminium bar
- Remove items from storage bag
Attaching backrest
- Inset backrest into designated slots so that push buttons are facing outwards
- Push holes in and continue to insert backrest until buttons securely lock into holes
Attaching handles
- Insert handle into frame receiver with handles facing inwards for palm comfort
- Select desired handle height and thread bolt from the inside hole to meet plastic washer and plastic hand screw on the outside
Securing brake cables
- Use a plastic clip that is attached to the brake cable and clip onto the aluminium frame

Folding the Seat Walker

Pull metal bar situated under the seat
This will bring up the aluminium bar connecting front and rear wheels
Reverse for unfolding, ensuring frame has been fully extended before using

Using the Brakes

The seat walker features handbrakes with an integrated locking function to provide optimal control and safety for the user.

To apply the brakes when in motion, pull the handbrake lever towards the handle and release to disengage brakes.
To lock the brakes when the seat walker is parked, push the handbrake lever down until it locks. To release the brakes, pull the handbrake lever towards the handle.
To adjust the tension of the brakes, tighten or loosen the tension adjustment nut (located at the end of the brake cable above the rear wheels). Adjusting the tensions of the brakes ensures the safe operation of the brakes when in use.

Sitting on the Seat Walker

Visually inspect walker to ensure there is no visible damage before sitting on walker.
Please ensure that the hand brakes are in the locked position by following the steps listed in applying brakes.
Please ensure you are on a stable surface.
Turn facing backwards the walker and hold both handles firmly, move back until your legs touch the walker and slowly lower yourself onto the walker.
Please ensure that your weight is centered and not to sway your body weight from side to side.
WARNING: Do not use seat walker as a wheelchair aid.

Labelling Information

Product Label

The seat walker has a product label on the front of the frame. The product label includes the following information:

Name and address of the company
Name and code for the product
Safe Working Load (SWL)
Serial number of the product (which includes the date of manufacture and the batch serial number)

Usage Label

The seat walker has a usage label on the front of the frame. The usage label includes the following information:

Maximum seat walker width: 565mm
Suitable for indoor use
Safe Working Load of accessories bag is 5kg
Maximum seat walker width: 580mm
Suitable for indoor and outdoor use
Safe Working Load of accessories bag is 5kg

Product Care & Maintenance

It is recommended that the seat walker is inspected regularly for signs of wear and tear of the castors, seat or backrest.
If there are visible signs of wear and tear, please contact your authorised dealer for replacement parts.
Please ensure the brakes are tested prior to each use.
If exposed to water or moisture, promptly dry the seat walker to prevent corrosion of the frame.
The seat walker should be wiped down regularly using warm water or a mild detergent.
Only clean your seat walker with soft cleaning implements such as soft sponges, dish clothes and soft-bristled brushes. Warning, using sharp cleaning tools or similarly abrasive cleaning products could cause damage to your seat walker.
Clean wheels with a mild detergent and warm water, removing hair and other dirt from axles.
Lubricate with multi-purpose oil annually or if wheels begin to squeak.
All replacement parts as well as after-sales support and repair services are available through Hero Medical dealers.

Recycle & Disposal

Please follow the local government rules regarding proper recycling and disposal. It should always be done through an authorised agent or licensed place of disposal. Please review the list of seat walker parts and packaging materials to ensure they are recycled or disposed of correctly.

Frame: tubular aluminum
Seat & backrest: vinyl & nylon
Castors and handgrips: polyurethane
Packaging: cardboard box and plastic

Warranty

The Hero Medical Standard Seat Walker comes with 12 months warranty from the date of purchase on structural integrity.

During the warranty period any parts that have become defective due to faulty workmanship or material will be repaired or replaced without charge by a Hero Medical dealer of where the product was purchased.
The warranty is for normal domestic use only and excludes any defect or injury caused by or resulting from misuse, abuse, neglect, accidental damage, or any other alteration that affects the reliability or performance of the unit, not attributable to faulty manufacture, parts or labour.
The warranty excludes castors, components and parts that are subject to reasonable wear and tear.
The warranty excludes faults that have been identified as misuse or user error.
Unauthorized changes or modifications will forfeit your warranty.
If a defect or fault is discovered, the Hero Medical dealer of where the seat walker was purchased should be contacted immediately.