Snabb P2 Fitment CNC Aluminum Radio Knobs Instructions
- June 1, 2024
- snabb
Table of Contents
Snabb P2 Fitment CNC Aluminum Radio Knobs
Product Information
Specifications:
- Product: Snabb CNC Aluminum Radio Knobs (P2 Fitment)
- Tools Needed: None
Product Usage Instructions
Installation:
- Your radio does NOT need to be removed. Simply grab ahold of the factory plastic/rubber knobs and pull towards yourself (away from the radio).
- Once the factory Knob has been removed, you can see there is a D-shaped pattern on the factory shaft. Line the Snabb Aluminum Knob up with the shaft and firmly press the Snabb Aluminum Knob onto the radio. **NOTE: Our Aluminum Radio knobs are VERY tight fitting by design. This is to ensure proper fitment while making sure the knob does not fall off during use. You will need to use considerable force to properly install our Aluminum Knobs.
If you ever need to remove the knobs, the radio faceplate will need to be removed. Once the faceplate is removed, you can slide 2 screwdrivers underneath the knob and pry upwards. Take great care not to scratch the knobs.
FAQ
- Q: Are the Snabb CNC Aluminum Radio Knobs compatible with all car radios?
- A: The knobs are designed to fit P2 Fitment radios. Please check compatibility before purchasing.
- Q: Can I install the knobs without any tools?
- A: Yes, no tools are needed for the installation process.
Tools Needed: None
Thank you for your purchase. Our CNC Aluminum Radio Knobs are very easy to install and look great!
Installation
Installation of Snabb CNC Aluminum Radio Knobs:
- Your radio does NOT need to be removed. Simply grab ahold of the factory plastic/rubber knobs and pull towards yourself (away from the radio).
- Once the factory Knob has been removed, you can see there is a D-shaped pattern on the factory shaft. Line the Snabb Aluminum Knob up with the shaft and firmly press the Snabb Aluminum Knob onto the radio.
- NOTE: Our Aluminum Radio knobs are VERY tight fitting by design. This is to ensure proper fitment while making sure the knob does not fall off during use. You will need to use considerable force to properly install our Aluminum Knobs. Should you ever need to remove the knobs, the radio faceplate will need to be removed. Once the faceplate is removed, you can slide 2 screwdrivers underneath the knob and pry upwards. Take great care to not scratch the knobs.
- NOTE: Our Aluminum Radio knobs are VERY tight fitting by design. This is to ensure proper fitment while making sure the knob does not fall off during use. You will need to use considerable force to properly install our Aluminum Knobs. Should you ever need to remove the knobs, the radio faceplate will need to be removed. Once the faceplate is removed, you can slide 2 screwdrivers underneath the knob and pry upwards. Take great care to not scratch the knobs.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>