xtorm FS520x Series Fuel 20.000 mAh 35W Power Bank Instruction Manual

Table of Contents

SPECIFICATIONS

PRODUCT OVERVIEW

CHARGING YOUR DEVICE

Connect the USB-C end of the charging cable to the USB-C PD output of the Power Bank and the other end to the input of your device.
The charging will start automatically.
Charging some devices may require a different charging cable than the one supplied.

RECHARGING THE POWER BANK

Connect the USB-C end of the charging cable to output 3 of the Power Bank and the USB end to a wall charger.
For the fastest charging, use a 35W charger to fully recharge the Power Bank within 3.3 hours.

LED POWER INDICATOR

Power Button functions:
- Single press to turn on the Power Bank.
- Double press to turn off the Power Bank.
- Long press (5s) activates Low power mode (to keep charging devices that request it).

Q: How long does it take to fully recharge the Power Bank?

A: Using a 35W charger, it takes approximately 3.3 hours to fully recharge the Power Bank.

Q: What is the capacity of the Power Bank?

A: The Power Bank has a capacity of 20,000 mAh or 74Wh.

When using multiple outputs

When using 2 outputs

When using all outputs

A) Connect the USB-C end of the charging cable to the USB-C PD output of the Power Bank and the other end to the input of your device. The charging will start automatically.
B) Charging some devices requires a charging cable other than the one supplied.
E.g. an Apple Lightning® or a Micro USB cable.

A) Connect the USB-C end of the charging cable to output 3 of the Power Bank and the USB end to a wall charger.
B) For the fastest charging possible use a 35W charger. This will fully recharge the Power Bank within 3.3 hours.

A Power Button function:
- Single press to turn on the Power Bank.
- Double press to turn off the Power Bank.
- Long press (5s) activates “Low power mode” (to keep charging devices that request <100mA current)
B The display shows the remaining battery percentage between 0% (empty) and 100% (fully charged).

The fast charge indicator will light up when you are using the correct cable for fast charging your device. (35W USB-C PD and higher).

RECYCLING

When recycling this product, please follow WEEE battery recycling procedures. Contact your local recycling organization for more information.

TEMPERATURE CONTROL
- Provided with a temperature control chip that prevents overheating.
OVERLOAD PROTECTION
- Protects both the internal battery as well as the battery of the attached device from overcharging.
SECURED POWER MANAGEMENT
- Automatically picks the correct charging speed and efficiently divides power between attached devices.
SHORT CIRCUIT PROTECTION
- Breaks the circuit automatically when an overcurrent is detected. This protects the
  Xtorm charger and your device from short circuit damage.
A-CLASS BATTERY CELLS
- We only use the best battery cells that provide the fast charging you need and meet all safety requirements.
HIGH EFFICIENCY
- Our power products are built to power your device as efficiently as possible. This ensures the least possible loss of energy during the charging process.

Warnings

Don’t drop, disassemble, or attempt to repair the charger by yourself.
Avoid exposure to water or high humidity. Don’t be exposed to any heat source. Keep out of reach of children. Don’t use it in the presence of flammable gas.
The warranty will lapse in the event of improper use.
Telco Accessories has tested the product in a test environment. All statements/declarations made by Telco Accessories about the (operation) of the product are based on the results obtained from such tests.
These results/statements/declarations cannot be guaranteed, for example in cases of deviating or injudicious use and/or use in a different environment.