MuxLab SE-001042-A HDMI 2.1 48Gbps 4×1 Switcher User Manual
- June 28, 2024
- MuxLab
Table of Contents
MuxLab SE-001042-A HDMI 2.1 48Gbps 4×1 Switcher
FAQ
Frequently Asked Questions
- Q: Can I use this switcher with a 4K TV?
- A: Yes, this switcher is backward compatible and supports resolutions up to 8K@60Hz, so it will work with your 4K TV.
- Q: How do I know if the ARC/eARC function is working?
- A: The eARC LED indicator on the front panel will show the status of the ARC/eARC function. A solid light indicates it is working properly, flashing light indicates an issue, and no light means it is turned off.
- Q: What should I do if any accessories are missing from the package?
- A: If any accessories are missing, please contact the supplier from whom you purchased the unit for assistance.
Safety Precautions
To ensure the best performance from the product, please read all instructions carefully before using the device. Save this manual for future reference.
- Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury.
- Do not dismantle the housing or modify the module. It may result in electrical shock or burns.
- Do not open or remove the housing of the device as you may be exposed to dangerous voltage or other hazards.
- To prevent fire or shock hazard, do not expose the unit to rain, moisture and do not install this product near water. Keep the product away from liquids.
- Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on the housing, unplug the module immediately.
- Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
- Using supplies or parts not meeting the product specifications may cause damage, deterioration or malfunction.
- Refer all servicing to qualified service personnel.
- Install the device in a place with adequate ventilation to avoid damage caused by overheat.
- Unplug the power when left unused for a long period of time.
- Information on disposal of devices: do not burn or mix with general household waste, please treat them as normal electrical waste.
Introduction
The HDMI 2.1 48Gbps 4×1 Switch with Audio De-embedder (model: 500513) is a 4-in-1-out 8K switch. It supports 4 HDMI signal inputs and 1 HDMI signal output, the highest resolution is 8K@60Hz and is backward compatible, also supports advanced EDID management, CEC control, ARC/eARC and audio de-embedded function (Output through the optical and analog audio port). The product is widely used in security monitoring, media entertainment, broadcasting, command centers, and more.
Features
- HDCP 2.3 compliant.
- Supports 48Gbps FRL and 18Gbps TMDS video bandwidth.
- Video resolution up to 8K@60Hz 4:2:0 12bit, 8K@30Hz 4:4:4 12bit, 4K@120Hz 4:4:4 12bit, as specified in HDMI 2.1.
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG pass-through.
- Supports HDMI audio formats: LPCM 7.1CH, Dolby TrueHD, Atmos and DTS-HD Master, DTS:X Audio pass-through.
- Supports HDMI input and TV eARC audio de-embedded to SPDIF and L/R audio output.
- Supports advanced EDID management.
- Firmware can be upgraded through USB-C port.
Package Contents
- One (1) HDMI 2.1 48Gbps 4×1 Switcher with Audio De-embedder
- One (1) 5VDC/1A Multinational Power Supply
- One (1) IR Remote
- One (1) User manual (available via download)
Notes: Confirm that the product and accessories are all included. If not, please contact the supplier from which you purchased the unit.
Specifications
Technical
HDMI Compliance
HDCP Compliance Video Bandwidth
| ****
HDMI 2.1
HDCP 2.3
48Gbps FRL and 18Gbps TMDS
---|---
Audio Latency| No Latency
Video Latency| No Latency
Video Resolution| Up to 8K@60Hz 4:2:0 12bit, 8K@30Hz4:4:4 12bit, 4K@120Hz
4:4:4 12bit
Color Depth| 8/10/12bit
Color Space| RGB_4:4:4, YCbCr_4:4:4, YCbCr_4:2:2, YCbCr_4:2:0
Audio Formats
| HDMI Input/Output:
LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX,
DTS-96/24, DTS High Res, DTS-HD Master Audio, DTS:X, DSD
eARC Audio Out:
LPCM,Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DTS:X ,DSD
Audio De-embedded Output:
Optical: LPCM 2.0CH/Dolby/DTS 5.1CH Analog: LPCM 2.0CH
HDR HDR, HDR10, HDR10+, Dolby
Vision, HLG
ESD Protection| IEC 61000-4-2:
±8kV (Air-gap discharge) & ±4kV (Contact discharge)
Connection|
Input| 4 × HDMI IN [Type A, 19-pin female]
Output
| 1 × HDMI OUT [Type A, 19-pin female] 1 × OPTICAL [S/PDIF]
1 × L/R [3.5mm Stereo Mini-jack]
Control| 1 × SERVICE [USB Type C, Update port]
Mechanical|
Housing| Metal Emclosure
Color| Black
Dimensions| 176mm [W] × 68mm [D] × 18mm [H]
Weight| 315g
Power Supply| Input: 100-240VAC 50/60Hz, Output: 5VDC/1A
(US/EU standards, CE/FCC/UL certified)
Power Consumption| 2.5W (Max)
Operating Temperature| 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature| -20℃ ~ 60℃/-4°F ~ 140°F
Relative Humidity| 20~90% RH (Non-condensing)
Warranty| 2 years
Order Information| 500513 HDMI 2.1 48Gbps 4×1 Switcher with Audio De-embedder
(UPC: 627699005132)
Operation Controls and Functions
Front Panel
No
1
| Name
IR Window
| Function Description
IR signal receiving window.
---|---|---
2| Power LED| The red LED is on when the deviceis powered on.
3| IN LED (1~4)| When the HDMI IN 1/2/3/4 port is selected as the signal
source input channel,
the corresponding green LED will be on.
4| OUT LED| When the HDMI OUT port connects a display device, the green LED will be on.
5
| ****
AUTO LED
| When the auto switching function (switch to the corresponding signal input
channel when the signal source is connected.) is turned on, the green AUTO LED will be on.
6
| ****
eARC LED
| ▪ On: The ARC/eARC function is turned on. CEC communication and ARC/eARC is working properly.
▪ Flashing: The ARC/eARC function is turned on.
CEC communication and ARC/eARC is not working properly.
▪ Off: The ARC/eARC function is turned off.
7| eARC switch| Press the button to turn on/offARC/eARC function.
8
| ****
Selection Button
| Used to select signal source for OUT port.
▪ Short press this button to circularly switch HDMI input signal to the OUT port.
▪ Long press for 3 seconds to turn on/off the auto switching function.
9
| ****
EDID DIP Switch
| Use the DIP switch to set EDID.
111 – Copy OUT port sink EDID (as default)
110 – Video EDID copy sink EDID, Audio EDID Copy soundbar EDID
101 – FRL 12G_8K_HDR, Audio 2ch PCM
100 – FRL 12G_8K_HDR, Audio 5.1ch PCM/DTS/DOLBY
011 – FRL 12G_8K_HDR, Audio 7.1ch PCM/DTS/DOLBY/HD
010 – FRL 10G_8K_HDR, Audio 2ch PCM
001 – FRL 10G_8K_HDR, Audio 5.1ch PCM/DTS/DOLBY
000 – FRL 10G_8K_HDR, Audio 7.1ch PCM/DTS/DOLBY/HD
10| Service| Firmware update and control port.
Rear Panel
IR Remote
- eARC: Press this button to turn on/off ARC/eARC function.
- Auto: Press this button to turn on/off the auto switching function.
- 1/2/3/4: Press 1/2/3/4 button to select HDMI signal source IN 1/2/3/4to output.
- : Press this buttonto select the next HDMI signal source circularly.
RS232 Control
The Switcher can be managed using RS232 commands. Connect an RS232 cable between the command terminal (which can be a PC running terminal emulation software or a control system processor) and the Switcher.
For correct communication, configure the RS232 parameters with the following settings:
- 57600 baud
- 8 data bits
- 1 stop bit
- 0 Check bit
500513 ASCII Commands
Application Example
Situation 1
- When the ARC/eARC function is turned off, the connection diagram is as following. At this moment, the optical audio or analog audio is from the selected input channel.
Situation 2
When the ARC/eARC function is turned on, select the input port 1 by pressing the “Selection” button on the front panel or the 1 button on the IR remote, then connect the “IN 1(eARC)” port to a Soundbar to output the audio signal returned from the “OUT (eARC)” port, as shown in the figure below. (For example, when the user watches TV APP, the Switcher will pass-through TV eARC/ARC audio to the Soundbar.) At this moment, the optical audio or L/R audio is from the returned audio of the 8K TV connected to OUT(eARC).
Note:
- If the 8K TV supports ARC/eARC function, the Soundbar will receive the audio signal returned from the TV, and then emit the sound; otherwise it will not emit sound.
- The IN 1 channel will be locked when it is selected as the input source. At this moment, other input channels will not be identified automatically even if the Auto Switching is enabled. For example, if the IN 3 is connected to a source device now, and it will not be output as the signal source automatically because the IN 1 is locked.
Situation 3
- When the ARC/eARC function is turned on, select the input port 2/3/4 by pressing the “Selection” button on the front panel or the buttons on the IR remote.
- If connect the “IN 1(eARC)” port to a Soundbar now, it will output the audio signal from the selected input channel.
- At this moment, the optical audio or L/R audio is also from the selected input channel.
Contact
- 2321 Cohen | St-Laurent , H4R 2N7 Québec, Canada
- Tel: 514-905-0588
- Fax:514-905-0589
- Toll free: 1-877-689-5228
- info@muxlab.com
- salesteam@muxlab.com
- www.muxlab.com
Follow us:
Documents / Resources
|
MuxLab SE-001042-A HDMI 2.1 48Gbps 4x1
Switcher
[pdf] User Manual
SE-001042-A HDMI 2.1 48Gbps 4x1 Switcher, HDMI 2.1 48Gbps 4x1 Switcher, 4x1
Switcher
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>