BASS JAXX HP-0505 Wireless Headphones Instruction Manual
- June 27, 2024
- BASS JAXX
Table of Contents
BASS JAXX HP-0505 Wireless Headphones
Introduction
Congratulations, and thank you for choosing the \Wireless Headphones w~h Removable Microphone. This manual will help you operate the Bubble Wireless Headphones, but firstly you should familiarize yourself with the Bluetooth fun ctionality of your mobile phone or other devices before using the \Wireless Headphones.
Safety Rules
- Please follow the rules depicted in this manual closely to ensure your safety Before using this Bluetooth headphones, we would strongly encourage you to read through this user manual.
- Bemorewaryofanyedges, uneven surfaces, metal parts, accessories and its packaging so as to prevent any possible injury or damage.
- Do not modify, repair or dismantle this Bluetooth headphones. Doing so may result in fires, electric shocks, complete breakdown of this Bluetooth headphones, etc. All are not covered under warranty.
- Do not use an diluent or volatile liquid to clean the Bluetooth headphones.
- Do not use the Bluetooth headphones in a hazardous location.
Packaging Contents
1 X Bubble Wireless Headphones
1 x Instroction Manual
1 X USB Type-C Cable
1 X Removeable Microphone
Connection Diagram
How to use
General Functions
Desired Result
|
Required Action
---|---
Turn on & Enter the pairing mode| Press and hold the 0n/0ff Button for 3
seconds. After turning on, the LED indicator flashes red/blue.
Pairing| Use a mobile phone with Bluelooth function or other Bluetooth devices
to perform necessary pairing action.
After pairing , the LED indicator slowly blinks with blue.
Turn off| Press and hold the On/Off Button for 3 seconds
Charging| Plug the USB Type-C to the USB Type-C port. When charging, the LED
indicator turns red. After full charging.
the LED indicator tums off.
Answering a Call| Press 0n/Off button to answer phone call, press On/Off
button again to end call.
Pressandhold2secondstorejectcall.
Double dick to redial last call.
Play / Pause Music| Press On/ Off button to play music and press ii again to
pause music.
Pairing to Mobile phone or other device
To use your Bluetooth headphones, you must first pair your headphones with a mobile phone or other Bluetooth device. Once your Bluetooth headphones is paired to a specific mobile phone, they will remain paired and automatically recog nize each other whenever they are within range.
Pairing to a phone and Entertainment:
- Turn o n your phone and ensure the Bluetooth function is activated
- Turn on the headphones, enter the pairing mode.
- Search your Bluetooth devices o n your phone b y following the phone’s instructions. Refer to your phone’s user manual for more information .
- After a few seconds the phone will list the “HP-0505 HP” as a discover device Select it and follow your p hon e ‘s instructions to select this pairing
- Your phone will confirm the pairing , and then press Yes/OK.
Charging your headphones
For your safety, please always use an appropriate 5V input charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product.
Use the USB Type-C cable accessory provided with this headphones. Connect the
USB Type-C plug to the USB Type-C charging port on the headphones positioned
at CD in headphones diagram on page 2.
Connect the USB plug to a USB port on wall adapter to activate charging.
- Make sure to keep the headphones charging for a minimum of 2 hours before initial use.
Warning:
- You must select a qualified charger from a regular manufacturer.
- You must charge the Bluetooth headphones if it has not been used for more than 6 months.
Product Specification
Driver Diameter : 40 mm
Impedance: 32 Ohms
Frequency Response : 20 Hz – 20 kHz
Sensitivity : 100 dB +/- 3 dB
Power Supply : Li-ion Battery 3.7V 180mAh
Playing Time : 3-4 Hours
Charging Time: 2 Hours
Bluetooth Range : 32.8 Feet
Bluetooth Version : 5.3
USB Type-C Charging Cable Included USB Type-C Charging Cable Rating 5V/1A Max.
CAUTION: The USB Type-C charging cable included with this item is intended for use with this product. Only use the includedUSBType- Cchargingcabletocharge thi sproduct.
FAQ
-
Why is there no power even when the headphones is turned on?
Ans: Ensure the battery has been charged up to 1 hour for initial use. -
There is no sound when playback
Ans: Check the connection between headphones with phone or computer, if the connection is not established, please connect again. Make sure the headphones is paired and connected with your target phone or other master device.
FCC Statement
This device complies with the part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received inciudinginterferencethatmaycauseundesiredoperation Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generales, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged To try To correct The interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio/TV technician for help.
RF warning statement
ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement.
The device can be used in portable exposure condition without restriction.
Safety instructions for the lithium battery and charging the product
- The input voltage to the productis 5V 1A
- In order to charge the product in safe manner and reliable conditions,please only adopt certified appropriate charger /adapter for charging the product.
- Only charge the product at ambient temperatures between 10deg”Cl 50 deg “F and40deg “C/104deg’F.
- Do not heat above70deg”C/158deg’F,e.g. Donotexposetosunlightor throwintoflre Switch off the product after use
- Please note that we won’t take any responsivities for any wrong operation {e.g. Voltage higher than 5V) as this may result in severe injury or loss of property. and we cannot control the operating process during the time the user using this product.
- In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion . heat generation, fire development or smoke development.
The Bluet00th ” word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by 1616 Holdings, Inc. is under license. Other trademarks and trade names are those of their respective owners.
FCC ID: 2ADM5-HP-0505
Distributecl by 1616 Holdings, lnc 701 Market Street,Suite 200 Philadelphia, PA 19106
Keep all relevant information for future reference
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>