FIAMMA F40van Rain Guard Plus Cover Kit Installation Guide
- June 27, 2024
- FIAMMA
Table of Contents
FIAMMA F40van Rain Guard Plus Cover Kit
Specifications
- Product Name: Awning Accessories Installation Kit
- Model: F40van FORD CUSTOM L1
- Components: Rain Guard, Cover, Mounting Hardware
- Dimensions: Rain Guard – 100 cm
Product Usage Instructions
Pre-Installation
Before installation, check that nothing has been damaged or deformed during transport.
Installation
It is recommended to have the installation carried out by qualified personnel in compliance with local regulations.
- Check the brackets already installed.
- Tighten screws without forcing.
- Do not completely tighten the screws.
Maintenance
Regularly inspect the awning accessories for any signs of damage and ensure all screws are secure.
FAQ
Q: What should I do if I have doubts about the installation?
A: Contact your dealer for clarification and guidance on installation, use, and limitations of the product.
Q: Can I install the product myself?
A: It is recommended to have qualified personnel perform the installation to ensure compliance with local regulations and proper setup.
KIT RAIN-GUARD + COVER F40van FORD CUSTOM L1
Package contents
Check that nothing has been damaged or deformed during transport.
In the event of doubts or questions concerning the installation, use or
limitations of the product, contact the dealer. We recommend that the
installation is carried out by qualifi ed personnel and in compliance with
current local regulations.
Installation instructions
BRACKETS ALREADY INSTALLED
Before tightening the screws, make sure that the awning position doesn’t prevent the opening of the rear door.
ATTENTION Periodically check the brackets to make sure they are fi rmly attached (especially after the fi rst kilometers) make sure the bolts are not loose and that holding brackets have not shifted.
Warranty Fiamma. In case of defects with regards to materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country in which the product was purchased.
Fiamma S.p.A. – Italy
Via San Rocco, 56
21010 Cardano al Campo (VA)
All rights reserved.
Fiamma S.p.A.
reserves the right to modify at any time, without notice, prices, materials,
specifi cations and models or to cease production of any model.