BEKA BA304SG Loop Powered 4 20mA Indicators User Manual
- June 27, 2024
- BEKA
Table of Contents
BEKA BA304SG Loop Powered 4 20mA Indicators
Specifications:
- Model: BA304SG, BA324SG
- Mounting: Field mounting
- Digits:
- BA304SG: 4 x 34mm high
- BA324SG: 5 x 29mm high & bar graph
- Enclosure material: GRP IP66
- Certifications: IECEx, ATEX, UKEX, North American gas and dust certification
- Code: II 2 G II 2 D Ex eb ib mb IIC T5 Gb
Product Usage Instructions
Special Conditions for Safe Use:
The indicators must be supplied from a SELF or PELV supply or from an approved
supply with double or reinforced insulation as per standard IEC 60079-14.
Installation:
Both models have four M6 clearance holes for surface mounting. Ensure proper
spacing as indicated in the manual.
Health and Safety Requirements:
Ensure loop-powered 4/20mA indicators are connected as per the provided
instructions. Use the supplied stopping plug and temporary hole plug for cable
entries.
Connections:
Follow the provided indicator assembly connector diagram for correct wiring.
Terminals 2 & 4 are internally linked, as well as terminals 5 & 6 for joining
return cable and wire screens.
Repair and Disposal:
Do not attempt to repair faulty units; return them to BEKA associates or your
local agent. Dispose of units correctly following proper guidelines.
FAQ:
-
Q: Where can I download manuals, certificates, and datasheets for the BA304SG and BA324SG models?
A: Manuals, certificates, and datasheets can be downloaded from here. -
Q: What are the compliance standards for the BA304SG and BA324SG models?
A: The models comply with ATEX Directive 2014/34/EU and other related standards such as EN IEC 60079-0, EN IEC 60079-7, EN 60079-11, EN 60079-18, EN 60079-31, EN 61326-1, and RoHS Directive 2011/65/EU.
Description
Field mounting Ex eb, 4/20mA loop-powered digital indicators which display the input current in engineering units. These indicators may be used as an alternative to a certified flameproof Ex d indicator in Zones 1 & 2, or as a replacement for an Ex n instrument in Zone 2.
| Model | Mounting | Digits | Enclosure material |
|---|---|---|---|
| BA304SG | Field mounting | 4 x 34mm high | GRP IP66 |
| BA324SG | 5 x 29mm high & bar graph |
Increased safety ‘Ex eb’ and dust ignition protection by enclosure ‘Ex tb’
Both models have IECEx, ATEX, UKEX and North American gas and dust certification
- Code:
- II 2 G Ex eb ib mb IIC T5 Gb
- II 2 D Ex ib mb tb IIIC T80°C Db
- -40°C ≤ Ta ≤ +60°C
- Un = 30V DC
Special conditions for the safe use of both models
The indicators shall be supplied from a SELF (separated or safety extra low
voltage) or PELV (protected extra-low voltage) supply or from adequately
approved supply providing double or reinforced insulation as required by
standard IEC 60079-14.
Installation for both models
Essential Health and Safety requirements for BA304SG and BA324SG loop powered 4/20mA indicators
Connections for both models
Repair
No attempt should be made to repair a faulty BA304SG or BA324SG. Suspect units should be returned to BEKA associates or your local agent.
Disposal
BA304SG or BA324SG should be correctly disposed of, not in household rubbish
EU Declaration of Conformity
This declaration of conformity for electrical apparatus is issued under the sole responsibility of the manufacturer.
Description of electrical apparatus
The BA304SG 4-digit and BA324SG 5-digit are Ex eb and Ex tb field mounting
4/20mA loop-powered indicators.
Manufactured by
BEKA Associates Ltd, Old Charlton Road, Hitchin, Herts. The UK. SG5 2DA
Council Directives this equipment complies with:
2014/34/EU (ATEX Directive)
Relating to equipment and protective systems intended for use in potentially
explosive atmospheres.
Provisions of the Directive fulfilled by the equipment:
Notified Body for EU-Type Examination and production
INTERTEK ITALIA SPA 2575 Via Guido Miglioli, 2/A 20063 Cernusco sul Naviglio
(MI) Italy.
- Compliant with standards:
- EN IEC 60079-0:2018;
- EN IEC 60079-7:2015 + A1:2018 + Corr 2019;
- EN 60079-11:2012;
- EN 60079-18:2015 + A1:2017 and EN 60079-31:2014
2014/30/EU (EMC Directive)
Standards used: EN 61326-1:2021
2011/65/EU (RoHS Directive) relating to hazardous substances in
electronic and electrical equipment.
2015/863/EU additional substances were added by amending Annex II to
Directive 2011/65/EU as regards the list of restricted substances.
Manuals, certificates and datasheets can be downloaded from https://www.beka.co.uk/304sg_324sg
BEKA associates Ltd. Old Charlton Rd, Hitchin, Hertfordshire,
SG5 2DA,
UK Tel: +44(0)1462 438301
e-mail: sales@beka.co.uk
web: www.beka.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>