BEKA BA414DF-F Intrinsically Safe Fieldbus Indicators Instruction Manual
- June 1, 2024
- BEKA
Table of Contents
BEKA BA414DF-F Intrinsically Safe Fieldbus Indicators Instruction Manual
Description
Field and panel mounting intrinsically safe, fieldbus indicators available with two different protocols. The 8 variable models can be configured as a fieldbus node or as a fieldbus listener.
Intrinsic safety
All models have IECEx, ATEX and UKCA gas certification, plus other approvals, such as FM. The field mounting models have optional dust certification. See full instructions.
Certification codes & input parameters
II 1 G Ex ia IIC T4 Ga Entity parameters
FISCO field device Ex ia IIC T4 Ga FISCO parameters
II 3 G Ex ic IIC T4 Gc Entity parameters
Ci = 0 Li = 8μH
-40°C ≤ Ta ≤ 70°C
Optional dust certification for BA414DF and BA444DF
II 2D Ex ia IIIC T100° Db IP66 Entity parameters
II 3D Ex ic IIIC T100° Dc IP66 Entity parameters
-20°C ≤ Ta ≤ +60°C
Special conditions for safe use
Essential Health & Safety Requirements for BA414DF, BA444DF, BA418CF & BA448CF Intrinsically Safe fieldbus indicators
UK
Issue 1
27th November 2023
BEKA associates Ltd. Old Charlton Rd, Hitchin, Hertfordshire,
SG5 2DA, UK Tel: +44(0)1462 438301 e-mail:
[email protected]
web: www.beka.co.uk
Installation & connections: Field mounting
Installation & connections: Panel mounting
Repair
No attempt should be made to repair a faulty fieldbus indicator, it should be returned to BEKA associates or to your local agent.
Disposal
Fieldbus indicators should be correctly disposed of, not in household rubbish.
EU Declaration of Conformity
This declaration of conformity for electrical apparatus is issued under the sole responsibility of the manufacturer.
Description
BA414DF, BA444DF, BA418CF and BA448CF are field and panel mounting, intrinsically safe, single and eight variable fieldbus indicators. Suffix -F denotes FOUNDATION™ fieldbus & suffix -P PROFIBUS PA protocol.
Manufactured by
BEKA associates Ltd, Old Charlton Road, Hitchin, Herts. UK. SG5 2DA
Council Directives this equipment complies with:
2014/34/EU (ATEX Directive)
Relating to equipment and protective systems intended for use in potentially explosive atmospheres.
Provisions of the Directive fulfilled by the equipment:
BA414DF & BA444DF
ITS06ATEX25313X issue 2 dated 29/10/2015
Group II Category 1G
Ex ia IIC T4 Ga -40°C ≤ ta ≤ +70°C.
FISCO Field Device
Ex ia IIC T4 Ta -40°C to +70°C.
Group II Category 3G
Ex ic IIC T4 Gc Ta -40°C to +70°C.
Group II Category 2D
Ex ia IIIC T100°C Db -20°C ≤ ta ≤ +60°C.
Group II Category 3D
Ex ic IIIC T100°C Dc Ta -20°C to +60°C.
BA418CF & BA448CF
ITS06ATEX25314X issue 2 dated 29/10/2015
Group II Category 1G
Ex ia IIC T4 Ga -40°C ≤ ta ≤ +70°C.
FISCO Field Device
Ex ia IIC T4 Ta -40°C to +70°C.
Group II Category 3G
Ex ic IIC T4 Gc Ta -40°C to +70°C.
Notified Body for EU-Type examination and production
INTERTEK ITALIA SPA 2575
Via Guido Miglioli, 2/A 20063
Cernusco sul Naviglio (MI) Italy
Compliant with standards:
EN IEC 60079-0:2018; EN 60079-11:2012
2014/30/EU (EMC Directive)
2011/65/EU (RoHS Directive) relating to hazardous substances in electronic and electrical equipment.
2015/863/EU additional substances added by amending Annex II to Directive 2011/65/EU as regards the list of restricted substances.
mark first affixed in 2006
Authorised Signatory: Issue 1 20th Nov 2023
Olivier Lebreton CEng MIET
Managing Director