Keychron V2 Max Wireless Mechanical Keyboard User Manual
- June 28, 2024
- Keychron
Table of Contents
Keychron V2 Max Wireless Mechanical Keyboard
Fully Assembled Version
Keyboard
1x Fully Assembled Keyboard
Including
- 1x Case
- 1x PCB
- 1x PC Plate
- 1x PET Foam
- 1x Case Foam
- 1x Sound Absorbing Foam
- 4 Sets x Stabilizers
- 1 Set x Keycaps (PBT Double-shot)
- 1 Set x Switches
Cable
- 1x Type-C to Type-C Cable
- 1x Type-A to Type-C Adapter
- 1x Extension Adapter For Receiver
Receiver
- 1x Type-A 2.4GHz Receiver
- 1x Type-C 2.4GHz Receiver
Tools
- 1x Keycap & Switch Puller
- 1x Screwdriver
- 1x Hex Key
Barebone Version
Keyboard Kit
1x Keyboard Kit (Without Keycaps & Switches)
Including
- 1x Case
- 1x PCB
- 1x PC Plate
- 1x PET Foam
- 1x Case Foam
- 1x Sound Absorbing Foam
- 4 Sets x Stabilizers
Cable
- 1x Type-C to Type-C Cable
- 1x Type-A to Type-C Adapter
- 1x Extension Adapter For Receiver
Receiver
- 1x Type-A 2.4GHz Receiver
- 1x Type-C 2.4GHz Receiver
Tools
- 1x Keycap & Switch Puller
- 1x Screwdriver
- 1x Hex Key
Quick Start Guide
If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.
Switch To The Right System
Please make sure the system toggle on the top left corner has been switched
to the same system as your computer’s operating system.
Connect 2.4GHz Receiver
Connect the 2.4GHz receiver to the device USB port.
Note : For the best wireless experience, we recommend using the extension adapter for receiver and putting the 2.4GHz receiver somewhere on your desk close to your keyboard for a low rate of latency and fewer signal interferences.
Connect Bluetooth
Connect Cable
The VIA Key Remapping Software
Please visit usevia.app to use the online
VIA software to remap the keys.
If the VIA cannot recognize your keyboard, please reach our support to get the
instruction.
The online VIA software can only run on the latest version of Chrome, Edge,
and Opera browsers yet.
VIA only works when the keyboard is connected by wire to the computer.
The Layers
There are five layers of key settings on the keyboard. The layer O is for the
Mac system.
The layer 1 is for the Windows system.
The layer 2 is for the Mac Multimedia keys.
The layer 3 is for the Windows Multimedia keys.
The layer 4 is for function keys.
If your system toggle is switched to Mac, then the layer O will be activated.
If your system toggle is switched to Windows, then the layer 1 will be activated.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>