tp-link C200C Pan Tilt Home Security Wi-Fi Camera User Guide
- June 27, 2024
- tp-link
Table of Contents
C200C Pan Tilt Home Security Wi-Fi Camera
“`html
Product Specifications:
- Model: Pan/Tilt Home Security Wi-Fi Camera
- Manufacturer: Tapo
- Resolution: High-definition
- Storage: microSD card (not included)
- Connectivity: Wi-Fi
Product Usage Instructions:
Appearance:
Tilt the camera lens up to find the RESET button and the microSD
card slot.
RESET Button:
While the camera is powered on, press and hold the Reset button
for at least 5 seconds until the LED blinks red. The camera will
reset and reboot.
microSD Card Slot:
Insert a microSD card and initialize it on the Tapo app for
local recording.
Mounting Instructions:
-
Mark Position: Place the mounting template
where you want the camera. For wall mounting, drill two holes
through two circles. -
Affix Screws: Insert two mounting anchors into
the holes, then screw the screws into the anchors. Note: To
securely attach the camera, ensure equidistant gaps (2 mm < A
< 3 mm) between the two anchors and screws. -
Secure Camera: Hang the camera securely on the
two screws. Ensure the camera is firmly attached. If not, adjust
the distance between the anchors and screws until it is
stable.
Frequently Asked Questions (FAQ):
Q: Where can I find technical support and more
information?
A: For technical support, user guide, and additional
information, please visit
www.tapo.com/support.
“`
Appearance
Tilt the camera lens up to find the RESET button and the microSD card slot.
RESET Button While the camera is powered on, press and hold the Reset button
for at least 5 seconds until the LED blinks red. The camera will reset and
reboot.
microSD Card Slot Insert a microSD card and initialize it on the Tapo app for
local recording.
Lens
Micro SD RESET
Micro SD RESET
microSD
For technical support, the user guide, and more information, please visit www.tapo.com/support/
· Keep the device away from water, fire, humidity or hot environments. · Do
not use damaged charger or USB cable to charge the device. · Do not use any
other chargers than those recommended. · Do not use the device where wireless
devices are not allowed. · Adapter shall be installed near the equipment and
shall be easily accessible. · Use only power supplies which are provided by
manufacturer and in the original packing of
this product. If you have any questions, please don’t hesitate to contact us.
· For indoor use only. · Do not disassemble, repair or modify the product. ·
Do not use the product if the casing has been broken. Danger of electric
shock. · Never touch the product with wet hands. · Do not expose to heavy rain
or any type of moisture. · Do not place near automatically controlled devices
such as fire alarms. Radio waves emitted
from this product may cause such devices to malfunction resulting in an
accident. · Observe restrictions on using wireless products in fuel depots,
chemical plants or when
blasting operations are in progress. · Do not use liquid to clean the product.
Only use a dry cloth. · Never put metal objects inside the product. If a metal
object enters the product turn off the
circuit breaker and contact an authorised electrician. · This product is not
intended to be used when providing medical care. Consult the
manufacturer of any personal medical devices, such as pacemakers or hearing
aids to determine if they are adequality shielded from external RF (radio
frequency) energy. · Do not use this product in health care facilities.
Hospitals or health care facilities may be using equipment that could be
sensitive to external RF energy. · Do not use this product near water for
example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool. · The product should be kept free from
excessive smoke, dust or high temperature and vibration. · This product should
not be exposed to direct sunlight · Do not place heavy objects on top of the
product. · When you leave the product unused for a long time unplug the
product from the power outlet. · This product may interfere with other
electronic products such as TV, radios, personal computers, phones or other
wireless devices.
· Operating Temperature: 0 °C ~ 40°C (32°F ~ 104°F) Please read and follow the
above safety information when operating the device. We cannot guarantee that
no accidents or damage will occur due to improper use of the device. Please
use this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC, 2011/65/EU and (EU) 2015/863. The original EU declaration of
conformity may be found at https://www.tapo.com/en/support/ce/ TP-Link hereby
declares that the device is in compliance with the essential requirements and
other relevant provisions of the Radio Equipment Regulations 2017. The
original UK declaration of conformity may be found at
https://www.tapo.com/support/ukca/
©2024 TP-Link
Quick Start Guide
Pan/Tilt Home Security Wi-Fi Camera
7106511335 REV5.1.0
*Images may differ from actual products.
STEP 1
DOWNLOAD APP
Get the Tapo app from the App Store or Google Play.
Scan to download
STEP 2
POWER UP
Plug in your camera and wait until the LED blinks red and green.
STEP 3
SET UP
Tap the button in the app and select your model. Follow app instructions to
complete setup.
LED Indication
Solid red
Starting up
Blinking red and green Ready for setup
Blinking red slowly
Connecting to Wi-Fi
Solid amber
Connected to Wi-Fi
Solid green
Connected to the cloud
Blinking red quickly
Camera resetting
Blinking green quickly Camera updating
Mounting Kit
Camera
Mounting Template
Screws Anchors (for wall mounting)
Mounting Instructions
1. Mark Position
Place the mounting template where you want the camera. For wall mounting,
drill two holes through two circles.
=6mm (15/64 in.)
2. Affix Screws
Insert two mounting anchors into the holes, then screw the screws into the
anchors.
Note: To securely attach the camera, ensure equidistant gaps (2 mm < A < 3 mm)
between the two anchors and screws.
3. Secure Camera
Hang the camera securely on the two screws. Ensure the camera is firmly
attached. If not, adjust the distance between the anchors and screws until it
is stable.