ITT ACN1-T1C Series Charging Connector User Manual
- June 26, 2024
- ITT
Table of Contents
ITT ACN1-T1C Series Charging Connector
Product Information
Specifications
- Model: ACN1-T1C-080-2BK-076A-1AP1
- Level: Level 2
- Compatibility: North American vehicles
- Charging Capacity: 48A/50A/80A
- Manufacturer: ITT Cannon SZ
Product Usage Instructions
Charging Process
- Ensure the vehicle is parked in a suitable location near the charging station.
- Connect the North American 48A/50A/80A AC charging connector to the vehicle’s charging port.
- Plug the other end of the connector into a compatible power source.
- Initiate the charging process based on the vehicle’s instructions.
- Monitor the charging progress until complete.
Safety Precautions
- Do not use the charging connector if it is damaged or shows signs of wear.
- Avoid exposure to water or extreme weather conditions while charging.
- Unplug the connector from the power source and vehicle when not in use.
- Refer to the vehicle manual for specific charging guidelines.
FAQ
-
Q: Can this charging connector be used with all-electric vehicles?
A: The North American 48A/50A/80A AC charging connector is designed for use with North American vehicles. Compatibility with specific electric vehicles may vary, so it is recommended to check your vehicle’s manual for compatibility. -
Q: What do the different charging capacities (48A/50A/80A) signify?
A: The charging capacities indicate the maximum amperage at which the connector can deliver power to the vehicle. Different vehicles may require different amperage levels for charging, soensure that your vehicle is compatible with the appropriate amperage.
Model :ACN1-T1C-080-2BK-076A-1AP1 ACN1-T1C-048-2BK-076A-1AP1-XXX
ACN1-T1C-050-2BK-076A-1AP1-XXX ACN1-T1C-XXX-2XX-XXXA-1AXX-XXX
Model “X”base on ITT talk dog optional item
ITT TALK DOG OPTIOANL ITEM
NORTH AMERICAN 48A/80A AC CHARGING CONNECTOR
The North American 48A/50A/80A AC charging connector provides a Level 2 charging solution for North American vehicles
- The connector is available in 3 lengths and can be mechanically fitted to a Level 2 charging system using standard mounting hardware.
- The connector is manufactured with a built-in temperature sensor for over-temperature protection
PERFORMANCE SPECIFICATIONS
- Model Number : NACS 48A/50A/80A
- Product Type: Charging Connector Assembly
- Compatibility: Single Phase AC
- Rated Voltage (Nominal)240 V
- Rated Current : 48A / 50A/ 80A
- Power Conductor Connection: Crimpled Method
- Insulation Resistance ≥100 ΜΩ
- Rated Drop Resistance: 200 drops
- Insertion/Withdrawal Force: <90N
- Flammability Rating : UL94V-0
- Drops performed from 1m height onto the concrete surface at 22 °C±8 °C
MECHANICAL SPECIFICATIONS
- Dimensions (Overall) ： 48mm x 34mm x 196mm
- Cable Diameter ：14.5 mm(48A，50A) /19.0mm(80A)
- Cable Length: 2.6 m, 5.5 m, 7.3 m….
- Connector Enclosure Material： Polycarbonate
- EVSE L/N Terminal Material ： T2 C11000,plating,plating Ag
- EVSE PE Terminal Material： Brass H62, plating Ag
- EVSE Signal Terminal Material: Brass H62, plating Ag
ENVIRONMENTAL SPECIFICATIONS
- Ambient Temperature : –40°C to 50°C (–40°F to 122°F)
- Operating Temperature : -40°C to 105°C (-40°F to 221°F)
- Maximum Elevation: 3,000 m (9,843 ft)
- Operating Humidity Protection Degree: Up to 95% RH, condensing
- Protection degree: IP67
- UV Resistance: per UL746C
ELECTRICAL SPECIFICATIONS
- Temperature Sensor Type: NTC or PT 1000
- Temperature Sensor: NTC 10K 3435 or PT 1000
- UHF transmitter: silicon labs si4010-C2-ATR
- UHF transmitter Frequency: 433.92MHz
FCC statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user operating the equipment this equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the Fcc Rules. These limits are designed to provide reasonable protection against harmful interference in a residential escalation This environment generates uses and can radiate radio frequency enervated if not installed and used by the instructions. may cause harmful interference to radiocommunications, However. there is no guarantee that interference will not occur in a particular installation. This equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off or on, the user is encouraged to try to correct the interference by one or more of the following measures. Recent or relocating tnerecewio antenna increases the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio technician to help device comply with part 15 of the rules. 0peraionis subject to the following two conditions (1this device may not cause family interference. and (2 this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with the radiation exposure limits set for an uncontrolled environment This should be installed and operated with minimum disitance20cm between the radiator & your body
Thanks!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>