SECRUI M508 Wireless Door Open Chime Kit User Manual
- June 26, 2024
- secrui
Table of Contents
- SECRUI M508 Wireless Door Open Chime Kit
- Product Information
- Product Usage Instructions
- Operating Instructions
- Receiver and Door Sensor Pairing
- Fixed-tone: Adding a door sensor with a FIXED receiver ringtone
- Installation for magnetic door sensor
- Clear All Settings – Unpair all door sensors from receiver
- Specifications of Receiver
- Supplier’s Declaration of Conformity
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SECRUI M508 Wireless Door Open Chime Kit
Product Information
Specifications
- Compliance: FCC part 15 rules
- Operating Conditions: No harmful interference
- Radiation Exposure: FCC limits for uncontrolled environments
- Minimum Distance: 0cm between radiator and body
Product Usage Instructions
Warnings and Compliance
FCC Warning: This device complies with part 15 of the FCC rules. Please
ensure the following conditions are met:
- The device should not cause harmful interference.
- The device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not approved by the responsible party could void the user’s authority to operate the equipment.
Radiation Exposure Guidelines
Radiation Exposure Statement: To comply with FCC radiation exposure
limits, ensure the following:
- Install and operate the equipment with a minimum distance of 0cm between the radiator and your body.
FAQ
-
Q: What should I do if I encounter harmful interference?
A: If you experience harmful interference, please contact customer support for assistance and refrain from using the device until the issue is resolved. -
Q: Can I modify the device for better performance?
A: No, any modifications not approved could impact the device’s compliance and void your authority to operate it. Contact customer support for any performance-related queries.
Product Introduction
It’s a Wireless Door Open Chime kit. When the 1wo parts of the door sensor are
separated more than 0.4 inch, door sensor will be triggered, then you will
hear the ringtone from the receiver. which can help deter break-ins, keep your
children and pet safe, and never miss a customer when they come. It is ideal
door alarms for home, office, store, warehouse, garages, and more!
Package List
Secrui Doorbell Receiver(s),Secrui Magnetic Door Sensor(s),User Guide
Features
- 58 tones optional
- Colorful LED indicator
- 5 volume levels adjustable (mute mode with light only)
- Memory function: Keep the previous setted tune after re-plugging it
Operating Instructions
Button Press
Door Sensor & Magnetic Strip Matching
Selecting the Ringtone
- Short press Cycle FORWARD through the tones
- Long press [ hear a short beep sound l Cycle REVERSE through the tones
Setting the Volume
Short press, l ~5 volume setting
Note: The volume changes to the largest automatically every time after
the receiver is power on,
Receiver and Door Sensor Pairing
-
Long press, receiver beeps once
-
MoveB
Receiver beeps 1wice Get the 1wo parts together -
Move B again
Receiver beeps once Get the 1wo parts together -
Short press
-
Move B
Music is ringing, adding successful
(Adding the second door sensor or more please according to the above steps )
Fixed-tone: Adding a door sensor with a FIXED receiver ringtone
-
Short press select the favorite tone
-
Long press simultaneously Receiver beeps once
-
MoveB
Receiver beeps 1wice Get the 1wo parts together -
Move B again
Receiver beeps once Get the 1wo parts together -
Short press
-
Move B
Music is ringing, adding successfully. (Adding the second door sensor or more with a FIXED receiver ringtone please according to the above steps )
Note:
When in adding state, short press any keys on the receiver or /eaves it 20s
without any operation, the receiver will automatically quit the adding state.
Installation for magnetic door sensor
Clear All Settings – Unpair all door sensors from receiver
-
Press and hold (don’t release it), plug in the receiver.
-
Press and hold, continuous l O beeps and the LED indicator flashes l O times, then gives a senes of fast beeps.
Specifications of Receiver
- Working voltage: l 00-240V. 50-60Hz AC
- standby current: <3mA
- Working current: < l l mA
- Radio frequency: 433MHz
- Operation range: 500 feet (in open area)
Specifications of Transmitter Button
- lp55 waterproof
- Working Temperature: -4 °F – l 22°F
- Working Humidity: ,; 85%
Specifications of Door sensor
- Non-waterproof
- Working Range: 500 ft (in open area)
- Working current: 3uA(standby), < 45mA(Transmitting)
- Installation gap: ,; 0.4inch
- Working Temperature: -4 °F – l 22°F
- Working Humidity: ,; 85%
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
The following equipment:
is herewith confirmed to comply with the requirements of FCC Part 15 Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interterence, and
- This device must accept any interference received, including interference that may cause undesired operation.
The result of electromagnetic emission has been evaluated by Shenzhen TOBY
Technology Co., Ltd. (www.tobylab.cn) laboratory (FCC
Accredited Test Firm Registration Number: 854351) and showed in the test
report.
It is understood that each unit marketed is identical to the device as tested,
and any changes to the device which could adversely affect the emission
characteristics will require retest. The following importer / manufacturer
(Located in the United States) is responsible for this declaration:
Email :contact@secrui.com