secrui 007 Motion Sensor LED Night Light User Manual
- June 14, 2024
- secrui
Table of Contents
secrui 007 Motion Sensor LED Night Light
Service E-mail: support@secrui.com
Product appearance
Features
- This product is a passive infrared induction night light. When the infrared sensor is triggered in the dark area, the LED of the night light will immediately light up the surrounding area.
- This product is suitable for any place that needs lighting, including residential areas, houses, factories, shopping malls, office buildings, and corridors, closets, bedrooms, kitchens, warehouses, etc.
Instruction
- When the switch is turned to the ON, the LED light is always on;
- When the switch is turned from the OFF to the AUTO, the LED light will light up for a few seconds first, then turns off, and after that enter the AUTO mode;
- When the product is in the AUTO mode and in the dark area, the LED light will automatically light for about 15 seconds while someone passes the infrared sensor. After the 15 seconds, the LED light will automatically light out. If someone passes by again during the lighting period, the LED light will automatically prolong the lighting period for about 15 seconds.
Notice: A red LED light next to the night light USB port will light up when using USB cable charging the battery.
Attention
- The night light installation location should be away from the air conditioner, heater, fridge, stove or any place where the temperature changes rapidly or the air flow is fast;
- The infrared sensor is more sensitive to the lateral motion than the vertical one. Therefore, it is better to install the night light in the place perpendicular to the walking direction.
Sensor detection range Plan View 110
Specifications
- Power Supply: USB-Sv / Built-in Battery 3.7v S00mAh
- Color Temperature: White (3000-3200K)
- Sensor Type: Dual motion sensor and light sensor
- Detection range: 10ft / 3m
- Standby Current: ,souA
- Working Current: ,somA
- Infrared Detection Distance: approx. 6-7 meters
- Dark Environment: 0-50 lux
- White-light Environment: ,so lux
Package includes:
- 1 x Motion Sensor LED Light
- 2 x 3M Double sided Tapes
- 1 x Ultra-thin Metal sheets
- 1 x USB Charge Cables
- 2 x Screws
- 1 x User Manual
FAQ
-
Q1: How long does the motion sensor light work in auto mode after fully charged?
A1: This motion sensor light built-in a S00mAh lithium rechargeable battery which is USB charging, can be used up to 12 hours at “ON” mode and 2 months at “AUTO” mode for one single charge. -
Q2: How do know that the battery is fully charged?
A2: When charging you will see a small red light, when fully charged it will turn off. -
Q3: Does it work while charging?
A3: It does still work whilst charging. -
Q4: How long will they actually stay on when they detect motion?
A4: It will stay on as long as you keep moving within range of the sensor. Once you walk away, it will shut off in a 15 seconds or so. -
Q5: How do you install the motion sensor light?
A5: You could use the included magnet strip and 3M adhesive tape package included to stick it on anywhere you want. It can also be used as a small flashlight for movement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>