SECRUI D12 Door Alarm Sensor User Guide
- June 14, 2024
- secrui
Table of Contents
Door Sensor Alarm User Guide
Model: D12
The Security Window/Door Alarm provides a simple-to-use, cost-effective security solution to protect you and your family against home invasions thanks to the 120-decibel alarms, loud enough to make a would-be intruder think twice about entering through your doors or windows. The window/door alarms feature a contemporary design with easy access buttons and controls for simple operation.
Operation
ON/OFF Switch — open and close the door alarm switch.
Press the SET button to change the door alarm’s chime mode.
Mode | Press SET to Change Mode | Mode of operation |
---|---|---|
Intruder Alarm Mode | 1 | When the door is opened, alarm sounds for 1 minute or |
until SET button is pressed to stop.
Entry Doorbell Mode| 2| After the door is opened, the alarm makes a ding dong
sound
then stops.
Open Alarm| 3| While the door opened, the rapid alarm sounds until door
is closed then stop.
Open Reminder| 4| While the door is opened, a slowly amplifying chime sounds
until it is closed.
Note:
- When the Intruder alarm mode is activated, press the SET key to cancel the alarm. or pushed the switch to the OFF to stop the alarm. If you do not take either of these steps, then the alarm wilt keep ringing for 1 minute.
- When the sensor alarm battery is low, the Alarm will beep for a shorter period. Replace the batteries promptly before the alarm stops working Altogether.
Installation Guide
- Use the double-side adhesive tape to fix the main unit at the side of the door/window. Attach the bar magnet to door frame/window frame with the arrow aligning with the reference line of the main unit.
- Test the setup by switching the system’s switch to “ON” position of the main unit and see whether the alarm can be triggered by opening the door/window.
Precautions
- D0 not install in a place where the surface is easily damaged or wet.
- Do not install in a place where the installation base in not strong.
- Leave the host away from magnetic product.
Technology Parameters
Brand: SECRUI
Mode: D12
Operating voltage: 3V (2x AAA type batteries)
Environment humidity: < 90%
Working humidity: —I0 60 °C
Our company provides 18 months of free warranty and lifetime maintenance
services for the products, and guarantees 24 – hours online service. Within 18
months from the date of purchase , damages caused by poor material or design
defects of the product can be replaced or repaired free of charge.
Repairs and replacements performed after 18 months will be charged the product
cost.
Information to be provided when contact the seller for warranty
- Product name
- Order number
- Fault description
Manufacturer: Shenzhen Keri Smart Technology Co., Ltd
Address: Building B1, Xinhaosheng Industry Zone, Yonge Road, Qiaotou, Flying
Subdistrict, Bao’an
District, Shenzhen, China
Email: support@secrui.com
Youtube: Secure Tech http://www.lukbird-call.com
Prolix GmbH
Brehmstr.56, 40239 Dusseldorf
Germany
Telefon:+4921131054698
Email: eu@eulinx.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>