SCOTT SCALE 2023 29 Inch Mountain Bike User Manual

2023 SCOT T
SCALE MANUAL

SCALE 2023 29 Inch Mountain Bike

THE SCALE SHOULD BE ADJUSTED EXACTLY TO THE RIDER FOR MAXIMUM SAFETY AND RIDEABILITY.
Please contact your authorized SCOTT dealer for advice in order to avoid technical problems or any harm.

LEGEND

GEOMETRY & TECHNICAL DATA

XXL
---|---|---|---|---|---|---|---
A| Head tube angle| °| 67.4/67.9| 67.4/67.9| 67.4/67.9| 67.4/67.9| 67.4
B| Head tube length| mm| 90/90| 100/95| 110/110| 120/120| 120
C| Top tube horizontal| mm| 580/575| 605/600| 630/626| 660/656.5| 680
D| standover height| mm| 755/752| 786/781| 805/800| 835/835.1| 870
E| BB offset| mm| -60/-62| -60/-62| -60/-62| -60/-62| -60/-62
F| BB height| mm| 315/313| 315/313| 315/313| 315/313| 315
G| Wheelbase| mm| 1111.8/1105.4| 1138.2/1131.1| 1164.6/1158| 1195.9/1189.4| 1215.9
I| BB center to TST| mm| 390/390| 440/440| 480/480| 530/530| 580
J| Seat angle| °| 75/75.4| 75/75.4| 75/75.3| 75/75.3| 75
K| Chainstay| mm| 425/425| 425/425| 425/425| 425/425| 425
L| Reach| mm| 420.3/418.5| 442.8/442.3| 463.3/463.6| 492.9/491.2| 512.9
M| Stack| mm| 596.1/600.3| 605.3/604.9| 614.6/618.9| 623.8/628.1| 623.8
| Fork Rake| mm| 44| 44| 44| 44| 44
| Trail| mm| 112.6/105.1| 112.6/105| 112.6/105| 112.6/105| 112.6

The rear brake calliper is a post mounted 160mm without an adapter.
The maximum rotor size is 180mm, except on a small size frame where it must not exceed 160mm.
If you wish to use two piston brake callipers, you must check the clearance, as not all two piston brakes will fit.
Please note that on a small size frame it is only possible to use a 500 ml water bottle, with a side entry cage.
Carbon frames will have a unique insert for the rear axle.

HEADSET ADJUSTMENT (CARBON BICYCLES ONLY)

It is important to install the headset correctly depending on the set up required. There are two types of headset cups.
0° & 0.6° ( 64° & 65°) These can be indentified from the stamp on the inner surface of the headset cup
The headset is available in two options: 288251 SYN HEADSET ZS56/28.6-ZS56/40 MTB 290060 SCO HEADSET CUP KIT SPARK 22
Do not use a standard headset tool to remove these plastic headset cups.

RIDELOC

There are two Rideloc levers for the Scale, this will depend on which fork has been fitted.
296245 SCO RIDELOC DOWNCLAMP 0-7-14/0-10MM 23
296246 SCO RIDELOC DOWNCLAMP 2P/0-17MM 23

CABLE ROUTING

Foam tubing: 277026 SCO CABLE ANTI-RATTLE LINER 90CM 20
Both cables must route above the bottom bracket.

SPARE PARTS

| 297086 SCO STEM ACCESSORY COVER COMBO 22
---|---
| 420004 SCO SCALE CARBON 23 CHAINSTAY PROTECTOR
420003 SCO SCALE ALLOY 23 CHAINSTAY PROTECTOR
| 297132 SCO CHAINGUIDE SCALE CARBON 23
| 296609 SCO AXLE RWS REAR 148X12 GENIUS PLUG 23

| 297728 SCO HEADSET KIT SCALE ALLOY 23
| 290059 SCO STEM SPACER/TOP CAP SY MTB XC 22
290057 SCO STEM SPACER/TOP CAP SY MTB COMBO 22
290057 SCO STEM SPACER/TOP CAP SY MTB DC 22
| 290056 SCO HEADSET SPACER KIT IC MTB 22

| 286000 SCO DROPOUT SRAM UDH 21

| 297136 SCO BOTTLE CAGEINSERTS
SCALE HMX-SL 23

| 297133 SCO CABLE GUIDE KIT
DT COV.SCALE CB 23

MANUFACTURER’S GUARANTEE,

When purchasing a new SCOTT bicycle from an authorized SCOTT dealer, SCOTT grants a manufacturer’s guarantee subject to the following provisions.

CONDITIONS
The manufacturer’s guarantee is only granted to the first-time buyer of a SCOTT bicycle who has purchased it from an authorized SCOTT dealer. The manufacturer’s guarantee only  applies if the bicycle is registered to the first buyer at www.scott-sports.com within ten days of purchase.

DURATION
The manufacturer’s guarantee is granted from the date of purchase for a period of five years on bicycle frames and rear ends. The guarantee period is reduced to three years, if the SCOTT bicycle is not serviced at least once a year by an authorized SCOTT dealer. Maintenance services must be carried out in accordance with the maintenance instructions in the SCOTT manual and must be confirmed there by the stamp and signature of the authorized SCOTT dealer. For frames and rear ends of Category 5 bicycle models and for rigid forks manufactured by SCOTT, the duration of the manufacturer’s guarantee is limited to two years.
If a defect on the SCOTT bicycle is remedied within the scope of a manufacturer’s guarantee or a warranty claim, the duration of the manufacturer’s guarantee is not extended. The manufacturer’s guarantee ends, when the first-time buyer transfers ownership of the SCOTT bicycle to a third person.

ASSERTION
The manufacturer’s guarantee is provided by SCOTT Sports SA, Route du Crochet 11, 1762 Givisiez, Switzerland. The buyer must inspect the SCOTT bicycle immediately after purchase and notify his authorized SCOTT dealer at once in writing of any obvious defects. Hidden defects must be reported immediately after their discovery. In the event of a guarantee claim, the SCOTT bicycle must be handed over to an authorized SCOTT dealer. The latter will contact SCOTT to remedy the defect. The assertion of a guarantee claim always requires the presentation of the original proof of purchase as well as the proof of maintenance service in the SCOTT manual. Performance of SCOTT in the event of a guarantee claim
In the event of a guarantee claim, SCOTT will, at its own discretion, repair the defect or replace the defective product with a product of similar quality, whereby colour and model deviations are possible. If a repair or replacement is not possible, a purchase price refund will be made taking into account previous use. SCOTT is entitled to commission third parties to remedy the defect.

LIMITATIONS
The manufacturer’s guarantee applies exclusively to frames, swingarms and rigid forks of SCOTT bicycles. Bicycle components are excluded from this manufacturer’s guarantee.
The manufacturer’s guarantee does not apply to normal wear and tear, damage caused by accidents or other excessive force on the SCOTT bicycle, corrosion, improper maintenance, incorrect assembly and assembly of unsuitable components or accessories as well as cosmetic defects, for example in the varnish.
The manufacturer’s guarantee does not apply to SCOTT bicycles that have been used in a rental shop.

MISCELLANEOUS
These manufacturer’s guarantee provisions apply to all SCOTT bicycles as of model year 2023.
Statutory warranty rights of the buyer and guarantees of component manufacturers (Shimano, SRAM etc.) remain unaffected by this manufacturer’s guarantee.
The place of jurisdiction for all disputes in connection with this manufacturer’s guarantee is Freiburg, Switzerland. This manufacturer’s guarantee is subject to Swiss law to the exclusion of all legislation that refers to foreign law.

© SCOTT Sports SA 2022. All rights reserved.
The information contained in this manual is in various languages but only the English version will be relevant in case of conflict.
P.E.D Zone C1, Rue Du Kiell 60 | 6790 Aubange | BelgiumDistribution: SSG (Europe) Distribution Center SA
SCOTT Sports SA | 11 Route du Crochet | 1762 Givisiez | 2022 SCOTT Sports SA www.scott-sports.com Email: webmaster.marketing@scott-sports.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>