Scott 48860 Essential Electronic Towel Dispenser Instruction Guide
- June 4, 2024
- SCOTT
Table of Contents
Scott 48860 Essential Electronic Towel Dispenser
Specifications
- Package Dimensions: 17 x 13.6 x 10.4 inches; 8.35 Pounds
- Material Plastic
- Style Electronic Dispenser
- Brand Scott
Introduction
A dependable blend of effectiveness, performance, and value is offered by Scott Essential. You can rely on the Scott Essential Towel Dispenser System since you have more pressing matters to worry about. It’s an easy way to stay mobile in a busy, fast-paced environment because it’s a Scott Essential branded system. More than 120,000 dispenses, or 60,000 hand dries, may be made by the electronic paper towel dispenser on a single set of batteries, giving it a battery life of up to five years. It is 99.9% jam-free to make sure you never forget to dry your hands and reduce the chance of cross-contamination. Without having to open the dispenser, you can monitor the supply levels thanks to the cover’s durability, strength, and transparency. When installed correctly and when utilizing the suggested paper towels, it complies with ADA standards.
Thereby lowering user complaints and service interruptions. You may concentrate on more essential things by removing the worry associated with paper towel distribution.
What’s In the Box?
- Paper Towel Dispenser
- User Guide
Designed for maximum sanitary use, this electronic roll towel dispenser automatically provides the user with a measured amount of untouched paper towel. The positioning of a hand underneath the center bottom of the dispenser initiates the delivery of the paper towel into the user’s hand. Pulling forward on the towel separates it from the roll. The unused roll toweling is maintained inside the unit, minimizing cross-contamination.
Dispenser Mounting
Mount the dispenser with the bottom edge of the unit approximately 48 inches above the floor. Use at least two pan head screws no smaller than #8 x 1.0 inch. The installer must ensure that compatible and appropriate mounting hardware is used for the wall surface composition that the dispenser is being mounted to.
Dispenser Cover
The cover can be opened with the supplied key that is taped to the back of the dispenser. Insert the key into the two slots at the top of the cover. Push down and pull forward for the cover to open.
Battery requirements and loading
Open the dispenser cover. The battery compartment is located at the front lip of the dispenser. The cover to the battery compartment is removed by pushing the left hand tab inward and lifting up. Insert (4) “D” size alkaline batteries labeled with an “LR20” designation. Other types of batteries are not acceptable. Install batteries as shown in the graphics engraved in the battery compartment.
Paper roll loading and paper saving mode
The 48856 and 48857 units are designed to accept Scott Essential® 02000 paper codes; the 48858 and 48860 units are designed to accept Scott Essential® 02001 paper codes. Paper is to be loaded with the paper “tail” unwinding from the back of the roll. The first sheet of paper is started by placing the “tail” in between the two rollers, closing the cover, and initiating a dispense cycle. See the instruction graphics inside the unit.
Once the paper is loaded correctly, the unit is ready to dispense at the factory set nominal 11-inch paper length (it takes about three dispenses to self-adjust to the nominal paper length).
This dispenser is also equipped with patented Paper Saver technology. The Paper Saver technology decreases the second sheet of paper by 10% when the dispenser is activated within 3 seconds of a previous dispense.
Indicator light function
The LED READY LIGHT, located at the right, bottom edge of the paper chute, will flash one time after the batteries are installed and the cover is closed to indicate that the unit is powered on and initialized. The LED will flash once after each dispense- cycle to indicate that the unit is ready for the next use. The LED will flash once every 1.5 seconds continuously when the batteries need replacement.
Diagnostics
If the unit will not dispense
- If the LED indicator light is flashing, the batteries need to be replaced.
- If the LED indicator light is not flashing, make sure that the batteries are present and loaded in the correct orientation.
- Remove and re-install batteries.
- Make sure that the paper has been loaded correctly, the paper roll turns freely, and the paper path is clear of obstructions.
Frequently Asked Questions
What size roll fits this dispenser?****
Scott Essential High Capacity Hard Roll Paper Towels (02001), Fast Change with Scott Essential Dispenser, Unperforated, White, 950’ / Roll, 6 Rolls / Case, 5,700’ / Case.
Will scott 1000′ rolls(01005) fit in this dispenser?****
I do not believe they will fit. Never tried them myself but the description of them says they are 8″ in diameter. I believe this to be to large don’t think there is enough room for the roll to turn if you could get it loaded.
Automatic paper towel dispensers’ sources of power****
These need to be powered either by electrical wiring or batteries. When the battery power is low, the battery-powered dispensers frequently contain an indication light that flashes, alerting the maintenance staff that it’s time to change the batteries.
Are battery-operated automatic paper towel dispensers available?****
Instead than requiring proximity to an electrical source, the majority of these types function on batteries. To ensure that the ideal amount of paper is spread, they have adjustable sheet length and time delays.
How do towel dispensers function?****
The towel has an open end, and the clean part is kept in a bin at the base of the dispenser for cloth rolls. The towel’s clean and filthy halves never come into contact. When the towel is finished, it is disposed of in a bin or drum for laundering and replaced with a fresh, clean towel in the appliance.
How is a Kimberly Clark paper towel dispenser’s battery changed?****
The dispenser’s front lip houses the battery compartment. The battery compartment lid can be removed by pulling up and pushing the left hand tab inward. Place four “D” size “LR20” alkaline batteries into the device.
How does a dispenser for continuous towels operate?****
Additionally, this choice is battery-free. Additionally, towel dispenser batteries have an 18-month lifespan. The batteries survive a year or more, even in hospitals, where there is a big volume, according to Davis. Of course, using hand dryers is an additional choice.
How long do the batteries in paper towel dispensers last?****
This option does not require batteries. Batteries for towel dispensers also last about 18 months. According to Davis, the batteries last a year or longer, even in hospitals where there is a high demand. Of course, there is also the option of employing hand dryers.
How long do the batteries in paper towel dispensers last?****
This option does not require batteries. Batteries for towel dispensers also last about 18 months. According to Davis, the batteries last a year or longer, even in hospitals where there is a high demand. Of course, there is also the option of employing hand dryers.