scott aerator 13612 Night Glo LED 2 and 4 Light Sets Instruction Manual

scott aerator 13612 Night Glo LED 2 and 4 Light Sets

Product Information

Specifications

• Product Name: Night Glo LED 2 and 4-Light Sets
• Includes: Lights with power cable, bolts and nuts, stainless steel arms, transformer control unit
• Tools Needed: 7/16 and 1/2 wrenches, pliers

FAQ

• Q: What happens if I bypass the transformer?
  • A: Bypassing the transformer will cause the fixtures to fail as it is an integral part of the system.
• Q: How do I adjust the light angles for a fuller lighting effect?
  • A: Vary light angles by positioning them along the arms and tightening them securely but not over-tightening.
• Q: How do I connect the lights to the Transformer Control Unit?
  • A: Align pins and screw the connector together with a 1/2 turn. Do not force the connection tight to avoid damaging components.

WARNING: Bypassing the transformer will cause the fixtures to fail. The transformer is an integral and required part of the system.

Kit Includes

This Kit Includes

• (2 or 4) LIGHTS WITH POWER CABLE
• (2 or 4) 1/2″ BOLTS AND NUTS
• (2 or 4) STAINLESS STEEL ARMS
• TRANSFORMER CONTROL UNIT

Tools Needed

• 7/16″ AND 1/2″ WRENCHES AND PLIERS

Assembly Instructions

1. Attach each arm assembly to the water feature. Be sure to orient the arms with “L” facing upward. Remove one of the 2″ bolts attaching the float to your Scott water feature and align the holes with the stainless steel arm. Reinsert the bolt with washer, outward through the housing, float and stainless steel arm. Secure with washer and nut. Repeat for each arm assembly.
2. Continue by attaching each light to the slotted end of the stainless steel arms. Feed 1/2″ x 1/4″ bolt downward through each light bracket and steel arm then secure with 1/4″ nut. The lights can be positioned along the arm by loosening the lock nut, sliding the light to the desired position, then re-tightening the nut.
3. Connect the lights to the Transformer Control Unit by aligning pins and screwing the connector together 1/2 turn only. Do not force the connection tight or you may damage the O-ring or wiring.

WARNING

• Bypassing the transformer will cause the fixtures to fail. The transformer is an integral and required part of the system.

Manual Function Operation Instructions

1. Unlock the programmer by pressing the “C/R” button four times. This will remove the “a” symbol from the lower left corner of the screen and allow input on the device. If no inputs are pressed in 15 seconds, the device will lock itself again. To lock it manually, press the “C/R” button again.
2. Press the “MANUAL” button to cycle through available settings. Settings will appear in this order: ON, AUTO, OFF, AUTO.
   • Selecting ON will provide power to the lights.
   • Selecting AUTO right after the ON setting will provide power to the lights until the next programmed OFF function.
   • Selecting OFF will stop providing power to the lights.
   • Selecting AUTO right after the OFF setting will turn off power to the lights until the next programmed ON function.

Programming Instructions

Timer Programming Instructions for Single ON and OFF Setting

1. Unlock the programmer by pressing the “C/R” button four times. This will remove the “a” symbol from the lower left corner of the screen and allow input on the device. If no inputs are pressed in 15 seconds, the device will lock itself again. To lock it manually, press the “C/R” button again.
2. Press the “C” button to reset the device. It is inset to prevent accidental presses and will require a pen or small tool to press.
3. Set the time by pressing the clock icon and using the D+, H+, and M+ to set the day and adjust the time. Time is displayed in military time only.
4. Press the “P” key to set a time for the display to turn ON. Using the H+ and M+ buttons to adjust to the desired time.
5. Press the D+ button until the display shows all the desired combination of days for this setting across the top.
6. Press the “P” key to set a time for the display to turn OFF. Using the H+ and M+ buttons to adjust to the desired time.
7. Press the D+ button until the display shows all the desired combination of days for this setting across the top, then press the clock icon to lock in your settings.

Timer Programming Instructions for Multiple ON and OFF Settings

1. Unlock the programmer by pressing the “C/R” button four times. This will remove the “a” symbol from the lower left corner of the screen and allow input on the device. If no inputs are pressed in 15 seconds, the device will lock itself again. To lock it manually, press the “C/R” button again.
2. Press the “C” button to reset the device. It is inset to prevent accidental presses and will require a pen or small tool to press.
3. Set the time by pressing the clock icon and using the D+, H+, and M+ to set the day and adjust the time. Time is displayed in military time only.
4. Press the “P” key to set a time for the display to turn ON. Using the H+ and M+ buttons to adjust to the desired time.
5. Press the D+ button until the display shows all the desired combination of days for this setting across the top.
6. Press the “P” key to set a time for the display to turn OFF. Using the H+ and M+ buttons to adjust to the desired time.
7. Press the D+ button until the display shows all the desired combination of days for this setting across the top.
8. Repeat steps 4 through 7 for each desired setting, up to 16 settings can be programmed. Times should be set in order as settings cannot overlap.
9. When finished, press the clock icon to lock in your settings.

Warranty

The Scott Aerator Awesome Warranty

All standard Scott Aerator products are unconditionally warranted for five years against motor defects in materials or workmanship, under normal operating conditions. All other product components are warranted for one year from date of purchase. Scott Aerator will repair or replace failed parts under warranty when the defective unit is returned to the factory, shipping prepaid, and factory inspection establishes that the part was defective. The unit must be returned to the factory prior to shipment of replacement parts. All parts replaced under this warranty will be returned with shipping prepaid. Scott Aerator will not be liable for consequential damage nor for any costs associated with removal or attempts to repair components in the field.

Contact

• 13245 Barry Street, Holland, MI 49424
• scottaerator.com
• information@scottaerator.com
• 800-WATER-45 (800-928-3745 616-392-8882

References

• Outdoor Water Fountains, Pond Features, Pumps and Kits | Scott Aerator | Scott Aerator Company LLC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>