BASS JAXX HP-0548 Radius Wireless Headphones User Manual
- June 25, 2024
- BASS JAXX
Table of Contents
BASS JAXX HP-0548 Radius Wireless Headphones User Manual
Introduction
Congratulations, and thank you for choosing the Radius Wireless Headphones. This manual will help you operate the Radius Wireless Headphones, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the Radius Wireless Headphones.
Safety Rules
- Please follow the rules depicted in this manual closely to ensure your safety.
- Before using these Bluetooth headphones, we would strongly encourage you to read through this user manual.
- Be more wary of any edges, uneven surfaces, metal parts, and accessories and their packaging to prevent any possible injury or damage.
- Do not modify, repair or dismantle these Bluetooth headphones.
- Doing so may result in fires, electric shocks, complete breakdown of this Bluetooth headphone, etc. All are not covered under warranty.
- Do not use a diluent or volatile liquid to clean the Bluetooth headphones.
- Do not use the Bluetooth headphones in a hazardous location.
Packaging Contents
Connection Diagram
How to use
General Functions
Pairing to Mobile phone or other device
To use your Bluetooth headphones, you must first, pair your headphones with a
mobile phone or another Bluetooth device. Once your Bluetooth headphones are
paired to a specific mobile phone, they will remain paired and automatically
recognize each other whenever they are within range.
Pairing to a phone and Entertainment
- Turn on your phone and ensure the Bluetooth function is activated.
- Turn on the headphones, and enter the pairing mode.
- Search your Bluetooth devices on your phone by following the phone’s instructions. Refer to your phone’s user manual for more information.
- After a few seconds, the phone will list the “BT RADIUS HP” as a discovered device. Select it and follow your phone’s instructions to select this pairing.
- Your phone will confirm the pairing, and then press Yes/OK.
- Finally, select to connect with Radius Wireless Headphones from your phone.
Charging your headphones
Use the Micro USB cable accessory provided with these headphones. Connect the
Micro USB plug to the Micro USB charging port on the headphones positioned in
the headphones diagram on page 2. Connect the USB plug to a USB port on a
computer or wall adapter to activate charging. Make sure to keep the
headphones charging for a minimum of 6 hours before initial use.
Warning
- You must select a qualified charger from a regular manufacturer.
- You must charge the Bluetooth headphones if it has been not used for more than 12 months.
Product Specification
FAQs
-
Why is there no power even when the headphones are turned on?
Ans: Ensure the battery has been charged up to 1 hour for initial use. -
There is no sound when playback.
Ans: Check the connection between headphones with your phone or computer, if the connection is not established, please connect again. Make sure the headphone is paired and connected with your target phone or other master device.
Safety instructions for the lithium battery and charging the product
- The input voltage to the product is 5V 1A.
- To charge the product in a safe manner and reliable conditions, please only adopt a certified appropriate charger/ adapter for charging the product.
- Only charge the product at ambient temperatures between 10 deg °C/ 50 deg °F and 40 deg °C/104 deg °F.
- Do not heat above 70 deg °C/158 deg °F, eg. Do not expose to sunlight or throw into the fire.
- Switch off the product after use.
- Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.
- In extreme cases, abuse or misuse of Lithium battery packs can lead to an explosion, heat generation, fire development or smoke development.
Distributed by Five Below Merchandising, Inc.
701 Market Street, Suite 200
Philadelphia, PA 19106
Made in China
Visit Us At: www.fivebelow.com
Keep All Relevant Information for Future Reference.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation. Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
FCC ID: 2ADM5-HP-0548
Download PDF: BASS JAXX HP-0548 Radius Wireless Headphones User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>