Superun BA08 Treadmill For Home User Manual

Superun BA08 Treadmill For Home

SAFETY PRECAUTIONS

• Please read all instructions carefully before operating this product.
• CAUTION: please adhere to the directives outlined below to prevent harm to yourself or others.

1. Prior to initiating use of the treadmill, ensure it is effectively grounded, thus mitigating potential risks and accidents.
2. Please start with suitable sport as excessive exercise may affect health.
3. Consult a medical professional before commencing an exercise regimen.
4. Wear appropriate athletic shoes during exercise sessions (avoid running in slippers as they can become entangled with the machine, leading to malfunction).
5. Maintain a tidy surrounding to prevent dust particles from accumulating on the treadmill causing mechanical issues.
6. This particular model of the treadmill was designed for individual use only. Avoid proximity to children or pets at any time while the treadmill is operational to avoid potential incidents.
7. When fully extended, provide a minimum clearance between the treadmill and the walls and furniture (at least three feet on each side).
8. Discontinue using the treadmill should the power cord be damaged.
9. Should the treadmill malfunction or sustain damage, it is imperative to cease use. We kindly request you reach out immediately to your local distributor for prompt repair service.
10. Refrain from touching any moving parts manually. Also, kindly refrain from jamming or forcing items into the mechanism of the treadmill.
11. The treadmill should only be utilized indoors, avoiding exposure to extreme outdoor temperatures or potentially unsanitary gym conditions.
12. Place the treadmill on clean and flat ground, keep the treadmill well-ventilated, and make sure there are no sharp objects nearby. do not use the treadmill near water and heat sources.
13. Do not get off before the treadmill stops completely,
14. Do not utilize the treadmill near respiratory equipment or aerosols or sprays causing a mist.
15. To sustain the optimal operation of the treadmill, do not install or attach any accessories or components that are not part of the original assembly provided by the manufacturer of the treadmill.
16. Ensure all components of the treadmill are assembled and secured properly.
17. Always turn off the power supply and unplug the treadmill’s power cord following use.

PRODUCT INSTRUCTION

Product Illustrations

Technical Parameter

• Locate the device model in the carton.
• The above data is manual measurement, there may be some deviation, please refer to the actual received prevail.

Parts Lists

FIRST USE GUIDANCE

First-time Setup

1. Disconnect the power and put the machine on a level surface, ensuring a front-to-back clearance of 19.7 inches and a minimum of 40 inches of space on each side of the machine.
2. Flatten the folded rubber pads and center the belt. Hold the front of the treadmill and firmly pull the rear of the treadmill backward to unfold it.
3. Plug it in, turn on the machine, and allow it to run briefly to center the belt. Please refer to Section 5 for belt adjustment procedures if the belt is misaligned
4. Plug in the power, and turn on the machine, first use let the machine run by itself for some time for the running belt to align, if not, please refer to the running belt adjustment in Chapter 5 to adjust.

Folding Instructions

1. Disconnect the power, and hold the front of the treadmill while grasping the rear of it.
2. Firmly pull the rear of the treadmill forward to fold the treadmill (Be mindful of the significant impact force, ensure safety to avoid hitting yourself)
3. Center the belt, put the machine on a level surface, and secure both sides with the locking mechanisms

Safety Precautions

• Ensure no one is nearby when unfolding or folding the equipment, and keep children away.
• Significant force is required when unfolding/folding the machine, please exercise caution.
• Please refer to Section 5 for belt adjustment procedures if the belt is misaligned.

MANUAL GUIDELINES

Display and key

When the machine is running, the display window automatically switches every 5 seconds. The indicator light at the bottom of the Luli window changes with the display of the window.

The information displayed in different Windows is as follows:

1. WIFI window
   • Display the WIFI indication. The icon will light up when the WIFI connection is successful.
2. Bluetooth window
   • Display the Bluetooth indication. The icon will light up when the 81uetooth connection is successful.
3. Speed window
   • The current speed value is displayed in the running late, and the speed is on.
4. Time” window
   • Display exercise time.
5. Distance” window
   • Display the moving distance.
6. Calories” window
   • Display the calorie consumption value.

Window value display range

MANUAL GUIDELINES

Remote control

1. Press the “Speed – key to reduce the speed of the machine.
2. Press the “Speed+ key to increase the speed of the machine.
3. Press the “ON/OFF” button, and the machine will start or stop slowly.

Remote control

1. Press the “-” key to reduce the machine speed.
2. Press the “+” key to increase the machine speed.
3. Press the “ON/OFF” button, and the machine will start or stop slowly.
4. Mode” for the mode selection key: in the choice of various modes can use the speed increase and decrease key to set the relevant countdown value, and set the completion of the “ON/OFF” button to start the treadmill; While running, press the “Mode” button to pause the treadmill.
   • In the standby state, directly press the “ON/OFF” button, and the treadmill will start to move at the speed of 0.6 miles/hr, other windows start counting up from 0, so press the “+”, and”-* buttons to change the speed.

Startup Instructions

1. Stick the safety lock to the safety lock position on the panel. Tum on the power switch,pune-r will beep and the system will go to standby.
2. Press the START key, the window shows a 3-se<.:ond countdown, and every minus buzzer beep, the motor will not start.
3. The start-up speed is 0.6MPH, at this time you can press the speed + and – keys to adjust the speed.
   • Note: Remote control random distribution, please refer to the actual received one.

Operational Guidelines for the PitPat Application

• Note: System requirements: iOS13 or above; Android 6.0 or above.
• After registration, click the treadmill icon in the upper right corner

1. Waiting for the treadmill to connect
2. Searching for Wifi
   • Display “Green” to complete the connection
   • The treadmill supports a Bluetooth connection to your mobile device, allowing for comprehensive connectivity options.

Simply:

1. Download the PitPat application onto your smartphone or scan the QR code Scan a for easy download.
2. Launch the PitPat software and navigate through the user prompts to register or log in with your account.
3. Secure your workout equipment connection by following these steps:
4. Activate the Bluetooth function on your smartphone and ensure the location service is switched on as well.
5. Access the PitPat application and consent to any requested permissions.
6. Navigate to the home screen of your mobile device and tap the running machine icon located at the top right corner. This will direct you to the search interface within the program. Your phone will automatically detect nearby connected devices, including your treadmill with an identifier beginning with “PitPat-T”. Once detected, select your treadmill to establish a successful link. A single beep from your treadmill indicates a completed connection, which is accompanied by a brightening of the Bluetooth icon displayed on its panel display.

Note that during this connection process, it’s essential to maintain an active internet connection on your smartphone to have full control over the treadmill via 81uetooth. The complete network configuration specifics can be found in the app description.

• Reminder: If the treadmill is not connected to PitPat, the Bluetooth icon on the treadmill will be inactive. Conversely, if the treadmill has successfully linked with the app, the Bluetooth symbol shall be active on the machine.

User Guide for Configuring the WiFi Connection on Your Treadmill

• Upon successful connection between your treadmill and the mobile app, you will be directed to the WiFi configuration screen of the treadmill.
• Please note that our model is exclusively compatible with a 2.4GHz frequency range (as indicated on the app, only the 2.4GHz WiFi signals detected on the treadmill will appear).
• Therefore, ensure that your internet access point can support 2.4GHz frequencies.

1. Identify the network you require to connect to.
2. Enter the required WiFi password as per onscreen instructions. upon establishment of a viable internet connection, the Bluetooth icon located on the display panel of the treadmill will illuminate, signifying that your application has returned to the primary homepage.
3. Note: If the WiFi connection fails or is disrupted, wait until the WiFi signal stabilizes before restarting the treadmill to reconnect to the internet.

ERROR AND SOLUTIONS

Error Codes and Solutions

Belt Adjustment

1. When running belt leans to the left, adjust the screw on the left 1-2 turns clockwise. Then, test running; If the running belt still leans to the left, repeat the above steps until the running belt is aligned.
2. When running belt leans to the right, adjust the screw on the right 1-2 turns clockwise. Then, test running; If the running belt still leans to the right, repeat the above steps until the running belt is aligned.
3. When the running belt gets too tight it will cause stronger resistance. Please adjust both side screws 1-2 turns counterclockwise, and loosen the belt until stopping skidding or pausing
   • When the running belt is too loose, please adjust both side screws 1-2 turns along clockwise.
   • Warning! Do not overtighten the rollers! It may cause permanent damage to the bearing!

MAINTENANCE

Maintenance Guidance

Proper maintenance helps keep the treadmill in the best condition while improper maintenance may damage or shorten the life span of the treadmill.

1. Regularly clean and maintain the treadmill, ensuring all components are kept immaculate.
2. After each use of the treadmill, employ a pristine towel or cloth to wipe down vital areas such as the console, depleting sweat and debris. Take care not to allow electrical elements or running belts to come into contact with water.
3. Seek to position your treadmill in an area that is clean, dry, and free from moisture. Ensure it is powered off and disconnected from its socket before storage.
4. Ease of transportation is incorporated within this product, equipped with wheels for seamless relocation. Before shifting the treadmill, ascertain it is unplugged and correctly folded.
5. Conduct constant checks on the individual parts of the treadmill and ensure they are securely fastened. Components exhibiting signs of damage should be swiftly replaced.
6. Before commencing exercise, the running belt has been appropriately adjusted; however, with continuous usage, there may be varying degrees of stretching experienced by the belt.
   • This may result in wearing out the belt due to its deviation from the center and friction with the side roller and rear cover.
   • Belt slippage over time is common. If the running belt slips or gets stuck during movement on the treadmill, you can adjust the belt for better performance.

Lubricant

1. The treadmill must be lubricated after half a year or a cumulative run of 100 hours. add 1/3 to 1/2 bottle at a time.
2. Confirm the lubrication status. With the treadmill off, lift the running belt from one side and reach for the surface under the running belt, if the lubricant can be touched, there is no need to add more lubricant.
   • But if the lubricant dries up, refill it with it.
   • Use only non-petroleum-based lubricants.
3. Follow the figure below to properly add the lubricant.
4. Clean the treadmill.
5. Turn off the power, lift the running belt, and apply silicone oil to the inner surface.
6. Start the treadmill and lubricate at 3 mph for 10-20 seconds.

WORKOUT ROUTINES

Warm-up

• A warm-up exercise of 5-10 minutes is required before each operation.

Breathing

• Do not hold your breath during the operation. Normally, when you are ready to restore your movements, breathe through your nose and exhale with your mouth.
• Breathing should be coordinated with your movements. If you breathe too quickly, you should immediately stop exercising.

Frequency

• Muscles in the same area should have 48 hours of rest, that is, the same area can be trained the next day.

Load

• According to the individual physical condition to determine the amount of training, and then exercise according to the principle of asymptotic load, muscle soreness is normal at the beginning of training, as long as you continue the exercise, soreness can be eliminated.

Relax

• Five minutes of restoring action should be taken after each exercise, especially when the foot muscles are stretched and relaxed to prevent long-term coagulation and maintain muscle elasticity.

Diet

• To protect the digestive system, you can exercise one hour after a meal. After training, you should eat at least half an hour.
• During exercise, you should drink less water, especially large amounts of water, to avoid increasing the burden on the heart and kidneys.

Exercise Guidelines and Recommendations

• DECLARATION OF CAUTION: Before commencing this or any exercise regimen, you must consult your health care professional.
• Warm-up exercises enhance blood circulation, providing muscles with increased oxygenation, elevation in body temperature, and preparation for physical exertion to follow.
• Each training session should initiate with a five to ten-minute stretch routine and light movements warm-up. The accompanying illustrations showcase various fundamental stretches.
• The recommended approach is to undertake a warm-up session before executing your workout. For comprehensive warm-up benefits, repeat each stretch for three consecutive sets.

1. Stretch down:
   • Bend your knees slightly with your body stretched down slowly, let your back and shoulders relax, and try to extend your hands to touch your toes. Hold for 10-15 seconds and take a break for a few seconds. Repeat 3 times.
2. Hamstring stretch:
   • Sit down on a clean cushion, straighten one leg place the other leg inward towards the thigh, and snug on the inside of the straightened leg. In the meantime, try to touch the toes of your straitened leg with the hand on the same side.
   • Hold for 10-15 seconds and take a break for a few seconds. Repeat 3 times for each leg.
3. Calf and Achilles Tendon Stretches:
   • Place both hands against the wall while standing with one foot behind the other, keeping your back leg straight and both heels planted on the ground while leaning against the wall.
   • Hold for 10-15 seconds and take a break for a few seconds. Repeat 3 times for each leg.
4. Quadriceps Stretch:
   • Hold your body steady with your left hand holding against the wall and your right hand reaching back to grab your right heel and pull it slowly towards your hips until you feel the muscle tightness at the front side of your thigh.
   • Hold for 10-15 seconds and take a break for a few seconds. Repeat several times for each leg.
5. Sartorius (muscle of inner thigh) Stretch:
   • Sit on the floor with your two feet holding against each other and your knees pointing in the opposite directions, grab your feet with your hands and pull them toward your groin.
   • Hold for 10-15 seconds and take a break for a few seconds. Repeat 3 times.

SERVICE COMMITMENT

• This product is exclusively intended for domestic applications. Any anomalies associated with commercial usage will not be subject to our warranty coverage.
• If you experience any issues with the functionality of your product, kindly liaise with your local distributor regarding customer support!

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body. Use only the supplied antenna.

• Support Service: +1888-318-4777
• Email:sports@pitpatpower.com.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>