ASRock Jupiter Series UCFF PCs with Six Core Coffee Lake Installation Guide

ASRock Jupiter Series UCFF PCs with Six Core Coffee Lake

Product Specifications

• Product Name: SSD-M.2
• Compatibility: Two M.2 SSDs installation
• Accessories: M.2 Fanless Heatsink

Product Usage Instructions

Installation of Two M.2 SSDs

1. Carefully insert two M.2 SSDs into the slots on the motherboard.
2. Tighten the screws to secure the two M.2 SSDs in place.

Replacing HDD Bracket with M.2 Fanless Heatsink:

1. Remove the 2.5 HDD Bracket from the top of the system.
2. Install the M.2 Fanless Heatsink in place of the removed bracket.

Securing Chassis Intrusion Bracket

1. Remove the screw of the chassis intrusion header from the HDD bracket.
2. Install the screw to the chassis intrusion bracket provided in the package.

Securing Components

1. Remove the screw from the motherboard and place the chassis intrusion bracket, aligning the screw holes.
2. Secure one side of the chassis intrusion bracket with the removed screw.
3. Secure the M.2 Fanless Heatsink provided in the package to the motherboard.
4. Ensure proper alignment and secure both the M.2 Fanless Heatsink and chassis intrusion bracket together.

FAQ

• Q: Is it safe to use the product near water sources?
  A: No, it is advised not to use the product near water or heated sources like radiators for safety reasons.

• Q: What should I do if I encounter technical problems with the product?
  A: If you face technical issues, unplug the power cord and contact a qualified service technician or your retailer for assistance.

• Q: Can users disassemble the product for maintenance purposes?
  A: No, disassembly by users will void the warranty. It isrecommended to seek professional help for any maintenance needs.

• Q: How should I dispose of used batteries from the product?
  A: Dispose of used batteries according to local regulations to prevent any risk of explosion or environmental harm.

• Q: What does the CE Mark Warning signify?
  A: The CE Mark Warning indicates that in a domestic environment, the product may cause radio interference, and users may need to take adequate measures to address it.

Package Contents

Front View

Re ar View

X600 D-Sub Version

Optional Accessories for Two M.2 SSDs Installation

*If you want to install two M.2 SSDs, please remove the 2.5” HDD Bracket on top, and install the M.2 Fanless Heatsink instead.

1. Carefully insert two M.2 SSDs into the slots.

2. Tighten the screw to secure two M.2 SSDs to the motherboard.
   A. Remove the screw of chassis intrusion header from the HDD bracket.
   B . Then install the screw to the chassis intrusion

3. Remove this screw from the motherboard. Place the chassis intrusion bracket and align the screw holes. Secure one side

4. Secure the M.2 Fanless Heatsink that comes with the package to the motherboard

5. Make sure that both the M.2 Fanless Heatsink and chassis intrusion bracket are properly secured together

WARNING

• INGESTION HAZARD: This product contains a button cell or coin battery.

• DEATH or serious injury can occur if ingested.

• A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.

• KEEP new and used batteries OUT OF REACH of CHILDREN

• Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

• Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.

• Even used batteries may cause severe injury or death.

• Call a local poison control center for treatment information.

• Battery type: CR2032

• Battery voltage: 3V

• Non-rechargeable batteries are not to be recharged.

• Do not force discharge, recharge, disassemble, heat above (manufacturer’s specified temperature rating) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.

• This product contains an irreplaceable battery.

• The icon indicates that a swallowed button battery can cause serious injury or death.

• Please keep batteries out of sight or reach of children.

Safety Information

Your system is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions.

Setting up your system

• Read and follow all instructions in the documentation before you operate your system.
• Do not use this product near water or a heated source such as a radiator.
• Set up the system on a stable surface.
• Openings on the chassis are for ventilation. Do not block or cover these openings.
• Make sure you leave plenty of space around the system for ventilation.
• Never insert objects of any kind into the ventilation openings.
• Use this product in environments with ambient temperatures between 0°C and 35°C
• If you use an extension cord, make sure that the total ampere rating of the devices plugged into the extension cord does not exceed its ampere rating.

Care during use

• Do not walk on the power cord or allow anything to rest on it.
• Do not spill water or any other liquids on your system.
• When the system is turned OFF, a small amount of electrical current still flow. Always unplug all power, modem, and network cables from the power outlets before cleaning the system.
• IF you encounter the following technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer:
  • THe power cord or plug is damaged.
  • Liquid has been spilled into the system.
  • The system does not function properly even if you follow the operating instructions.
  • The system was dropped or the cabinet is damaged.
  • The system performance changes.

No disassembly

IMPORTANT: The warranty does not apply to products that have been disassembly by users.

Battery replacement and disposal
WARNING: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to local regulations.

Product disposal notice

IMPORTANT: This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercury- containing button cell battery) should not be placed in municipal waste.
Check local regulations for disposal of electronic products.

CE Mark Warning
This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

M.2 SSD

1. Unscrew the 2.5-inch HDD bracket and remove it.
2. Carefully insert the SSD to the M2_1 SSD slot
3. Tighten the screw to secure the SSD to the motherboard
4. Re-install the 2.5-inch HDD bracket to the motherboard.

If you install a 2.5” HDD, only a M2_1 SSD can be installed. If you install two M.2 SSDs, it is required to install the optional accessory M.2 Fanless Heatsink. 2.5” HDD is not supported when you install two M.2 SSDs.

Wireless Module

How to Safely Remove the Module

1. Remove the screw of WLAN card.
2. Remove the WLAN card.
3. Disconnect the two antennas by manually living off the clips that hold them in place.

DRAM

Carefully insert SO-DIMM memory modules.
Push down until the modules click into place.

Fan

Carefully place the fan. Then connect the cable routing.

Heat Sink

1. Carefully insert thermal modules.
2. Tighten the screw to secure the heatsink to the motherboard.

FF HDD

1. Tighten 4 screws to secure the HDD.
2. Pull the release lever out. Place the 2.5” hard drive into the HDD bracket. Then slide the 2.5-inch hard drive into the bracket Firmly.
3. Connect HDD SATA Cable to HDD.

Chassis
Tighten the knurled thumb screw to secure the chassis

Vesa Mount Installation

1. Attach the VESA mount plate to the rear of a compatible display using the screws provided.
2. A. Jupiter can now be mounted by sliding the device into place
   B .Assemble Jupiter to Vesa Mount with M2.5 screws

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>