logitech ZONE 305 Wireless Headset User Guide

logitech ZONE 305 Wireless Headset

Specifications

• Adjustable headband
• Replaceable earpads
• USB-C charging port
• LED indicator light
• Call button
• Volume controls
• Flip-to-mute noise-cancelling microphone
• Teams button (Microsoft Teams version only)

Product Usage Instructions

Logitech ZONE 305 Wireless Headset

1. Press the power button once to power on the headset.
2. Once powered on, the LED light will turn white.
3. A voice prompt will indicate the battery status.

Logitech ZONE 305 Wireless Headset

• Insert the USB-C receiver into a USB-C port on your computer or dock.
• If using USB-A, insert the USB-C receiver into the USB-A adapter and then plug it into a USB-A port on your computer or dock.
• The headset is pre-paired to the receiver it ships with. Poweron the headset to complete pairing.
• When successfully paired, both the receiver and headset indicator lights will turn solid white.

Adjusting Fit

1. Slide the earcups up and down the headband until they sit comfortably on your ears.
2. Adjust the microphone boom up or down for optimal voice capture.

Muting

1. Flip up or down the microphone boom to mute or unmute. Voice prompts will indicate the status.

Charging

1. Connect the charging cable to the USB-C port on the earcup andthe other end to a power source.
2. The LED light will breathe white while charging and turn solid white when fully charged.
3. A 5-minute charge provides up to 1 hour of talk time, with a full charge taking around 2 hours.

Logi Tune Enhance your music and meeting experience using Logi Tune. Adjust the sidetone, mic level, and EQ for personalized audio. Update software and firmware periodically for optimal performance.

KNOW YOUR PRODUCT

WHAT’S IN THE BOX

1. Zone 305 wireless headset
2. USB-C receiver*
3. USB-C to USB-A adapter*
4. USB-C to USB-C charging cable
5. Travel bag
6. User documentation
   It is only available for versions with the receiver.

POWERING ON/OFF

1. Press the power button once to power on the headset.
2. Once powered on, the LED light will turn white.
3. There will be a voice prompt that tells you the battery status1.

PAIRING VIA USB-C RECEIVER
Only available for versions with receiver

1. USB-C
   Plug the USB-C receiver into a USB-C port on your computer or dock.
   USB-A
   Insert the USB-C receiver into the USB-A adapter. Then plug the USB-A adapter into a USB-A port on your computer or dock.

2. Headset is already paired to the receiver it ships with. Just power on the headset.
   Once successfully paired, the light indicator on the receiver will remain solid white.Light indicator on the headset will also turn solid white .

PAIRING VIA BLUETOOTH®

1. Long press the power button on earcup until LED light blinking fast to initiate Bluetooth® pairing.

2. 2a. For Windows
   Place the headset close to your computer and pair the headset via Swift Pair.
   When the Swift Pair notification shows
   “Zone 305”, select “Connect.”
   Only for native Bluetooth® version
   You must connect to a Windows 11 computer via the Swift Pair to enable Microsoft Teams certification over native Bluetooth®. If you don’t see a Swift Pair notification, do the following:

   • Pair your headset to the computer with the method shown below in 2b.
   • When paired successfully, the Swift Pair notification should show up. Select “Connect”.
     Note: Make sure “Show notifications to connect using Swift Pair” is enabled in your computer’s Bluetooth® settings. 2b. For macOS and other operating systems In your computer or mobile device’s Bluetooth® settings, select “Zone 305” in discoverable devices.

3. Repeat steps 1 and 2 if you want to pair with another device. You can pair with a maximum of 8 devices and connect to 2 devices simultaneously.

ADJUSTING FIT

1. It may be easier to adjust the headsets on your head. Slide the earcups up and down the headband until they sit comfortably
   on your ears.

2. Move the microphone boom up or down until it is leveled with your mouth for better voice capture.

MUTING

1. Flip up or down the mic boom to mute or unmute.
2. You will hear voice prompts that indicate whether the microphone is muted or unmuted1.

CHARGING
The LED light on the headset will become red when the battery is lower than 10%.

1. Plug one end of the cable to the USB-C port on the bottom of the earcup and the other end into the USB-C charging port on your computer, dock, or a power adapter.

2. The LED light will start breathing white when charging.

3. The LED light will turn solid white when fully charged.
   A 5-minute charge will give you up to 1 hour of talk time3, and a full charge takes around 2 hours.

4. The headsets can be used with Bluetooth® paired while charging.

LOGI TUNE
Take control of your music and meeting experience with Logi Tune. Adjust sidetone, mic level, and EQ for your preferred audio experience using the Logi Tune desktop or mobile app for Logitech headsets.
It is also recommended to boost your headset performance with periodic software and firmware updates. Learn more and download Logi Tune at logitech.com/tune, the Apple App Store or Google Play store.

ADJUSTING SIDETONE
Sidetone lets you hear your own voice during conversations so you are aware of how loud you are talking. In Logi Tune, select the sidetone feature, and adjust the dial accordingly.

• A higher number means you hear more external sound.
• A lower number means you hear less external sound.

AUTO SLEEP TIMER
By default, your headset will automatically power off when not in use for 30 minutes to conserve battery. Adjust the sleep timer in Logi Tune. To wake up your headset, try press the power switch again.

RECONNECT YOUR HEADSET
Only available for versions with receiver
In case the headset is disconnected to the receiver, you can reconnect your headset via Logi Tune.

1. Plug USB-C receiver or USB-A adapter with the USB-C receiver into the computer USB port.
2. Power on the headset by long pressing the power button.
3. Open Logi Tune Desktop on your computer.
4. Select “Zone Receiver” from the dashboard.
5. Wait while it is looking for the previously connected headset.
6. If no headset is shown as connected to the receiver, click “Pair headset”.
7. Enter pairing mode on the headset by long  pressing the power button until the headset LED light starts blinking.
8. Once successfully paired, the light indicator on the receiver and on the headset will turn solid white.

RESET YOUR HEADSET

1. Power the headset on.
2. Press and hold the call button and volume ’–’ button for 5 seconds.
3. The headset is successfully reset when the headset light indicator blinks fast in red and white for 3 times and turns off.

CONTROLS

Note:

• Teams activities are only functional when Teams is running on an unlocked computer
• Multipoint connection priorities
• Call activities are always the first priority over media streaming.
• When two devices are connected, the Bluetooth® connection will be prioritized over the receiver.
• When two Bluetooth® devices are connected, the last active device will take a priority over the other.
• The priority between two Bluetooth® devices can be customized on Logi Tune app under Connected devices.

HEADSET LIGHT INDICATOR

Note:
User-triggered behaviors, such as Bluetooth® pairing, will be prioritized; The light indicator will then revert back to its previous status once the behavior is completed.

RECEIVER LIGHT INDICATOR
Only available for versions with receiver

DIMENSIONS

• Headset:
• Height: 172.84 mm (6.8 in)
• Width: 166.71 mm (6.6 in)
• Depth: 66 mm (2.6 in)
• Weight: 122 g (4.3 oz)
• Earpad:
• Height: 66 mm (2.6 in)
• Width: 66 mm (2.6 in)
• Depth: 16 mm (0.63 in)
• USB-C receiver:
• Height: 1.05 in (26.6 mm)
• Width: 0.49 in (12.4 mm)
• Depth: 0.26 in (6.5 mm)
• USB- C to USB-A adapter:
• Height: 0.96 in (24.5 mm)
• Width: 0.61 in (15.4 mm)
• Depth: 0.34 in (8.7 mm)

COMPATIBILITY
Works with Windows, macOS, ChromeOS2, and Linux2 via USB-C receiver4 and Bluetooth®, and iOS, iPadOS, or Android devices via Bluetooth®.

TECHNICAL SPECIFICATIONS

• Microphone Type: Dual beamforming mics with noise-canceling algorithms
• Frequency response (headset speaker): 50-20kHz (music mode), 100-7kHz (talk mode)
• Frequency response (microphone): 100 -7kHz
• Battery life (listening time): Up to 16 hrs3
• Battery life (talk time): Up to 20 hrs3
• Bluetooth® version: 5.3
• Wireless range: Up to 30 m5
• Charging cable length: 1 m
• Audio compliance: EN 50332-2 compliant

FOOTNOTE

1. The headset currently supports voice prompts in the following languages with the Logi Tune desktop app: English, French, German, Italian, Spanish, and Portuguese. You can choose your preferred language in the app.
2. Device basic functions will be supported for operating systems that do not support Logi Tune. Check Logi Tune compatibility on logi.com/tune.
3. Battery life may vary based on user and computing conditions
4. Only available for versions with receiver.
5. pen field line of sight. Wireless range may vary depending on the operating environment and computer setup.

www.logitech.com/prosupport/zone305

© 2024 Logitech. Logitech, Logi, Zone, and the Logitech logo are trademarks or registered trademarks of Logitech Europe S.A. and/or its affiliates in the U.S. and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Logitech is under license. Microsoft Teams and Windows are trademarks of the Microsoft group of companies. App Store, Apple, macOS, iOS, and iPadOS are trademarks of Apple Inc. This product works with devices capable of running the latest version of ChromeOS and has been certified to meet Google‘s compatibility standards. Google is not responsible for the operation of this product or its compliance with safety requirements. Google, Google Play, Google Play logo, Google Meet, Google Voice, Android, Chrome and Chromebook are trademarks of Google LLC. USB-C is a trademark of USB Implementers Forum. All other third party trademarks are the property of their respective owners. Linux is a registered trademark of Linus Torvalds in the U.S and other countries. Zoom is a trademark of Zoom Video Communications, Inc. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.

FAQ

• Q: How many devices can I pair with simultaneously?
  • A: You can pair with up to 8 devices and connect to 2 devices simultaneously.

References

• Logi Tune - Software App for Webcams, Headsets & Logi Dock
• Logi Tune Software

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>