AMC iAC 120 DSP Installation Power Amplifiers Owner’s Manual
- June 26, 2024
- AMC
Table of Contents
INSTALLATION AMPLIFIERS
iAC Installation Amplifiers
Installation power amplifiers with DSP and Dante cards
iAC 120 DSP Installation Power Amplifiers
iAC DSP
Single and two channel Class-D amplifiers for 100 V and low impedance systems.
Electronically controlled amplifier circuit, easy menu navigation with rotary
controller and LCD display. Silent fan mode, DSP processing: 6-point
parametric EQ, limiter, gate, delay.
Balanced Phoenix & Stereo RCA inputs and audio link outputs. RS-232 port for
full control and status feedback allows integrating iAC amplifiers into large
and complex audio systems that can be automated or controlled remotely. iAC
2×240 DSP features internal
input-output routing and bridging. All models are available with optional
Dante card for use with digital audio network systems.
Technical Specifications| iAC 120 DSP| iAC 240 DSP| iAC
360 DSP| iAC 2X240 DSP
---|---|---|---|---
Output power (100 V & 4 Ω)| 1 x 120 W| 1 x 240 W| 1 x 360 W| 2 x 240 or 1 x
480 W
Power consumption| 180 VA| 360 VA| 540 VA| 720 VA
Stand by power consumption| 10 VA| 10 VA| 10 VA| 20 VA
Power supply| ~ 230 V, 50 Hz
Outputs| 1 x Phoenix power output, 1 x Phoenix audio link
Inputs| 1 x Balanced Phoenix, 1 x Stereo RCA Optional: Dante digital audio 1 x
RJ-45
Frequency Response (100 V)| 120 Hz – 20 kHz
Frequency Response (4 ohm)| 32 Hz – 21 kHz| 31 Hz – 20 kHz| 31 Hz – 20 kHz| 35
Hz – 21 kHz
THD| 0,07 %| 0,20 %| 0,25 %| 0,16 %
S/N ratio| 95 dB| 92 dB| 98 dB| 94 dB
Input sensitivity| | | |
Input impedance| Balanced: 11 kΩ, unbalanced 8 kΩ
Remote control| RS-232
Tone control (over RS-232)| 6-band parametric EQ
Cooling| Passive cooling| Forced air cooling with manual / auto control
Dimensions (H x W x D)| 44 x 430 x 245| 88 x 430 x 342
Weight| 5 kg| 8 kg| 9.4 kg| 11.5 kg
****AMC® BALTIC Neries kr. 14A, LT-48397, Kaunas, Lithuania / (370 37)
308585/www.amcpro.eu
Simple. Reliable. Profitable.