Cheerlux C12 1080P LED Projector User Manual

User Manual
1080P LED Projector

Precautions

Install

1. For best results, use this unit in a darker room or with the curtains drawn.

2. Please use the machine with care, dropping or impact may damage parts or cause blurred images,Display is abnormal.
   Pay Attention To Waterproof

3. This product does not have waterproof function, in order to prevent electric shock and short circuit danger, water should be avoided. or water splashes, and objects containing liquids such as vases, drinking glasses, etc., should not be placed around the  product.
   Clean

4. Unplug the power cord first.

5. Regularly clean the case with a damp cloth, neutral detergent can be used; do not use strong detergent or solvent (such as alcohol or thinner).

6. The lens should be cleaned with glasses cloth or lens paper, be careful not to scratch or scratch the lens.

7. Please use a soft brush regularly to clean the vents and speaker parts of the unit, otherwise the ventilation The port will be clogged with dust, causing the machine to overheat, causing the machine to malfunction.
   Power Supply

8. Please turn off the product after 4 hours of continuous work, and turn off the power for 30 minutes before turning it on again use.

9. Please use the power cord or adapter of the specified specification. If you need to replace it, please contact the supplier for line replacement.

10. Use the power cord with care and avoid excessive bending; damage to the power cord may result in electric shock and misfire.

11. After use, unplug the power cord from the power outlet.
    Warn

12. The disconnecting device for this projector is the appliance input socket, appliance input socket on the product No other objects should be placed nearby to prevent the multimedia projector from being disconnected from the power supply.
    It is safe to use only in areas below 2000m above sea level
    Only suitable for safe use in non – tropical climate conditions
    Do not look directly at the strong light from the projector lens to avoid eye injury.

ISED Statement
English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian Information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC STATEMENT :
his device c mplies with Part of th FCC RulesT o 15 e . Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following.
measures：
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be  installed and operated with minimum distance 20cm between the radiator & your body.

Packing List

Key Description

Remote Control Instructions

Operation Instructions

Source

1. Access “HDMI” or “AV”.
2. Press”Source”button on the remote or key button on the projector to choose the correct  Source when you want to connect DVD playor computer via AV port or Hdmi port.

Video Playback

1. Insert”USB”.
2. Select “Movie” and find the video you want to play in “USB”.

Language Setting

1. Home page selection”Setting”.
2. Press “OK” on the remote to choose the language

Bluetooth Connection

1. Put”On”mode if want to connect with Bluetooth Devices .
2. Select “Search Bluetooth” to access the pairing screen.
3. Select the device that you want to pair.

Projection Size/Audio/Video Format

Projection Size

Aspect Ratio| 16:9
Screen Size| Projection Distance (m)
50| 1.55
70| 2.17
100| 3.10
120| 3.72

Note: The above data is for reference only, please refer to the actual measurement
▶ Multimedia File Specification
Image Format

Audio Format

Doesn’t Support：Dolby AC3/AAC，DTS，WMA，DivX，etc
Video Format(Bit Rate up to 30~40 Mbs)

.dat/.ts/.mp4/.mpg/.mpeg/.avi/.mkv/.mov/.wmv/.asf/.flv/.3gp./.3gpp/.tp/.trp

Doesn’t Support：MSVC/CRAM，MP42，GMC，IV32，RLE，cvid，RV20，DivX，RM，RMVB FLV，etc.

The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Warranty Card

User Info| Username|
---|---|---
Contact Number|
Zip Code|
Mailing Address|
Product Information| Product Name|
Product Number|
Product Serial Number|
Sales Information| Sales Unit|
Contact Number|
Zip Code|
Address|
Sale Date|
Installation And Commissioning Date|
Invoice Number|
Delivery Date:| Maintenance Staff Signature:
---|---
Cause of Lssue:
Troubleshooting:
Service Point:| Delivery Date:
Delivery Date:| Maintenance Staff Signature:
---|---
Cause of Lssue:
Troubleshooting:
Service Point:| Delivery Date:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>