Cheerlux C9 Projector User Manual
- June 6, 2024
- Cheerlux
Table of Contents
Cheerlux C9 Projector
OVERVIEW
Requirements for handheld devices systems
| iSO | iOS 7 and above, iPhone4+,iPad2+,iPad4+ |
|---|
Android
| Android 4.2 and above, and has 1GB storage at least.
Projector operation
Open the projector, press “source” on the remote, then it shows ” Input Source” option on the projection image. Select the input method as “Screen Mirroring”, then press “OK” to enter.
Wireless display
For iOS devices.
- Find your iOS device’s WiFi setting, search and connect to the device SSID, which is shown on the top center of the projection image. (For example“Device: RKcast-2918FC”, Default password “PIN 12345678”)
- iOS devise back to the main interface, then swipe to show the “Control Center” – click “AirPlay” icon, find the device name, which shown on the projection image, click it to connect and ensure the “Mirroring” or “wireless mirroring” is open. Then you can enjoy large screen synchronous viewing of local video, music, pictures, documents and so on in your iOS device.
For Android devices
- Back main interface and choose “Miracast”, enter to miracast mode.
- Turn on the Mira cast function on your android phone, search the projector’s SSID (RKcast-2918FC) then click it to connect, it will synchronous with the projector automatically. PS: different brand mobile phones come with a different name of Miracast, such as wireless display, screen sharing, Muti-screen, share display, etc.
Screen mirroring – Wired connection:
(using an original lightning cable. )
For iOS devices.
-
Connect your iOS device via USB port.
-
For the first time use, there has a window pops up on your iOS device (see below picture 1), click “Trust” and input the correct password (see the below picture 2)
For Android devices
and find “About phone”(picture 2)
-
Click 7 times on version number （here Huawei phone as a sample）, then will pops up the below pic: “Developer model”. Then back to the system, click “Developer options”.
-
Open “USB debugging”(picture 1),it will pops up a window “Allow USB debugging”Tap “OK”(picture 2) and wait for 5 seconds then it will screen mirroring automatically.
iOS and Android device screen function:
- iOS/Android device connect with projector, close screen mirror and close 4G network.
- Open iOS/Android device WiFi setting, find projector’s WiFi name, click to connect. Then open brower and input IP address”192.168.49.1″, choose first option WiFi setting, and find the connectable WiFi, then input correct password.
After the connection succeeds, it will generate a new IP address, which will show on the top center of the projection image. The router only needs to be connected one time, next time use the projector again, it will connect to the router automatically.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>